I Международная конференция

CAMSTech-I 2020: Современные достижения в области материаловедения и технологий

Материалы конференции

О конференции


Международный Союз научных и инженерных общественных объединений, Красноярский краевой Союз НИО, Красноярский краевой Дом науки и техники Российского Союза НИО провели 31 июля 2020 года в г. Красноярске Международную конференцию «CAMSTech-2020: Современные достижения в области материаловедения и технологий».

Цель конференции - обмен опытом ведущих специалистов в области применения инновационных технологий, математических методов и информационных систем управления в промышленном производстве, в отраслях аэрокосмического, энергетического и химического машиностроения, в области материаловедения и дизайна новых материалов, а также инжиниринга и автоматизации технологических процессов.

Материалы конференции опубликованы в журнале IOP Conference Series: Materials Science and Engineering - Volume 919. Сборник проиндексирован в международной базе Scopus.

Сборник материалов размещен в Научной электронной библиотеке ELibrary  

Overview of I International Conference on Advances in Material Science and Technology - CAMSTech-2020

Программа конференции CAMSTech-I 2020

Программа очной сессии

Для авторов


Статьи опубликованы в журнале открытого доступа (open access)  IOP Conference Series: Materials Science and Engineering (volume 919).
Найти свою статью в сборнике на сайте журнала можно через строку поиска по фамилии первого автора или по названию, так как все статьи находятся на странице соответствующей секции.
На нашем сайте "Материалы конференции также дан весь перечень статей с переходами на статьи в журнале.

Статью можно скачать в формате pdf.

Каждая статья имеет титульный лист, на котором дан пример ее цитирования в международном формате APA: Igor V Kovalev and Anna A Voroshilova 2020 IOP Conf. Ser.: Mater. Sci. Eng. 862 011001

Перечень всех авторов, полное название журнала, и другие сведения, включая DOI (Цифровой идентификатор объекта (англ. Digital Object Identifier, сокр. DOI), даются на первой (следующей за титульной) странице статьи:

Ссылка на статью в соответствии с ГОСТ Р 7.0.5.-2008 оформляется следующим образом:
Kovalev I.V., Voroshilova A.A. Overview of the International Conference “Advanced Technologies in Aerospace, Mechanical and Automation Engineering – MIST: Aerospace-II” // IOP Conference Series: Materials Science and Engineering. 2020. Vol. 734(1). P. 011001(1-4). doi:10.1088/1757-899X/734/1/011001.

После индексации в Scopus вы сможете найти ее через бесплатный профиль. Индексация в Scopus занимает от 4 недель, индексация WoS - от полугода.  

Section 1. Material science and innovative technology


CAMSTech-1001

Improving the distribution uniformity of surface hardness of the cured CFRP molniezaschita coating during processing in a microwave field elektromagnitnom

I V Zlobina

Yuri Gagarin State Technical University of Saratov, Saratov, Russia

CAMSTech-1002

A probabilistic verification application of random value distribution of defects in rail tracks of industrial facilities

V P Sychev, P V Sychev and I E Voronkov

Department "Transport construction", Moscow State University of Railway Engineering Emperor Nicholas II; LLC Vagonputmash group of companies; Moscow State University of Civil Engineering (National Research University), Moscow, Russian Federation

CAMSTech-1003

The identification of internal defects in integrated circuits with the use of acoustic microscopy

O N Bolebruh, V A Arslanov, T A Ekimova and M A Belyaev

Petrozavodsk State University, Petrozavodsk, Russia; GS Nanotech, Gusev, Russia

CAMSTech-1004

Simulation of drawing-forming by magnetic-pulse deformation

N V Kurlaev, N A Ryngach and M E Ahmed Soliman

Novosibirsk State Technical University, Novosibirsk, Russia

CAMSTech-1005

A physical model of the interaction of microwave electromagnetic fields with the cured polymeric composite materials with distributed in volume of metal structures

I V Zlobina

Yuri Gagarin State Technical University of Saratov, Saratov, Russia

CAMSTech-1006

Сomparison of parameters of heteroepitaxial structures

A K Tashatov, R X Beytullayeva, T U Toshev, A P Umirov , Y О Ochilov

Karshi Engineering and Economics Institute (Uzbekistan)

CAMSTech-1007

On the features of production, design and reliability assessment of enclosing composite structures with effective thermal insulation

Victor M Bobryashov and Nikolay Bushuev

TSNIISK Named After Koucherenko V.A. Research Center of Construction Joint Stock Company, Moscow National Research Moscow State University of Civil Engineering, Moscow, Russia

CAMSTech-1008

CdAs2 – MnAs system investigation

A Ril and S Marenkin

Kurnakov Institute of General and Inorganic Chemistry, Russian Academy of Sciences, Moscow, Russian Federation; National university of science and technology “MISiS”, Moscow, Russian Federation

1009-CAMSTech

Phenomenon of the percolation in composite materials based on a polymer binder with a dispersed filler phase

V Sh Sulaberidze, E A Skorniakova

Saint-Petersburg State University of Aerospace Instrumentation, Saint-Petersburg, Russia

1010-CAMSTech

Fluorine coatings influence on the performance characteristics of flexible bellows

E I Amirkhanov, V Y Bazhin, I A Novikov and V V Logunov

OOO "Center of diagnostics, examination, certification», Saint-Petersburg, Saint-Petersburg, Mining University, St. Petersburg, Baltic State University “VOENMEH” titled D.F. Ustinov, Saint-Petersburg, JSC "NPP "Compensator", Petersburg, Russia

1011-CAMSTech

Simulation of rift element forming by magnetic-pulse deformation

N V Kurlaev and M E Ahmed Soliman

Novosibirsk State Technical University, Novosibirsk, Russia

1012-CAMSTech

Abnormal behavior of the torque in the system of magnetite-maghemite γ – Fe2O3 – Fe3O4.

Kh O Urinov, A K Amonov, Kh A Jumanov, I Sh Mujdibaev and N M Mamasadikova

Samarkand branch of Tashkent University of information technologies named after Mukhammad al-Khwarizmi, Samarkand, Uzbekistan

1013-CAMSTech

Siloxane based lubricating oils

G B Burdo and A N Bolotov

Tver State Technical University

 

1015-CAMSTech

The study of the force parameters of complex loading during thermal-force processing

K O Semenov and D A Rastorguev

Togliatti State University, Togliatti City, Russian Federation

1016-CAMSTech

Simulation of expansion a branch-pipe with «blinds» by the pressure of magnetic field

N V Kurlaev, N A Ryngach, F M Tagoev and M E Ahmed Soliman

Novosibirsk State Technical University, Novosibirsk, Russia

1017-CAMSTech

Industry 4.0 - new challenges for production

A M Alekseev and A I Borisov

Federal State Autonomous Educational Institution of Higher Education "M. K. Ammosov North-Eastern Federal University", Yakutsk, Republic of Sakha (Yakutia), Russia

CAMSTech-1018

A study of strength fluctuations of Portland cement by FTIR spectroscopy

E V Tararushkin, T N Shchelokova and V D Kudryavtseva

Federal State Institution of Higher Education «Russian University of Transport» (RUT - MIIT), Moscow, National Research Moscow State University of Civil Engineering, Moscow, Russia

CAMSTech-1019

OES diagnostic of SF6/Ar gas mixture of ICP discharges for LiNbO3 etching

Artem A. Osipov, Armenak. A. Osipov, Vladimir I. Berezenko , Sergey E. Alexandrov

Academic University, Russian Academy of Sciences, St. Petersburg, Institute if Mineralogy of Southern-Urals Federal Research Center of Mineralogy and Geoecology of Ural Branch of RAS, Miass, Chelyabinsk Region, Peter the Great St. Petersburg Polytechnic University, St. Petersburg, Russian Federation

CAMSTech-1020

Crystallization and rheological properties of alloys

V F Korostelev and М S Denisov

Vladimir State University, Vladimir, Russia

CAMSTech-1021

Improvement of abrasive machining performance in mining machinery manufacturing based on the use of innovative structures of tumbling bodies

D B Shatko, V S Lyukshin and P A Strelnikov

T.F. Gorbachev Kuzbass State Technical University, Kemerovo, Russia

CAMSTech-1022

Structural studies of additive hard magnetic alloy Alnico24

A S Zhukov, B K Barakhtin, V V Bobyr and A D Titova

NRC "Kurchatov Institute" – CRISM "Prometey", Saint-Petersburg, Russia

CAMSTech-1023

Development of organic poultry farming based on environmental engineering

L M Roiter, N A Eremeeva and Y S Roiter

Federal State Budget Scientific Institution Federal Scientific Center “All-Russian Research and Technological Poultry Institute” of Russian Academy of Sciences Sergiev Posad; Russian State Agrarian University - Moscow Timiryazev Agricultural Academy, Moscow, Russia

CAMSTech-1024

Steam coal engineering solutions

S E Terentyev, I K Zakharenko, P S Shcherbachenko, A A Gibadullin and D E Morkovkin

Smolensk agricultural Academy, Smolensk, Russia; Financial University under the Government of the Russian Federation, Moscow, Russia; State University of Management, Moscow, Russia

CAMSTech-1025

Plasma electrolytic treatment of Ti6Al4V alloy in electrolytes with boron-containing compounds

S A Kusmanov, I V Tambovskiy, I A Kusmanova and P N Belkin

Kostroma State University, Kostroma, Russia

CAMSTech-1026

Analysis of crack formation of an Al-Mg-Li (1420) system alloy under the influence of thermal energies

D V Agafonova, V A Mikheev

Samara National Research University, Samara, Russia

CAMSTech-1027

CVD diamond structures for fast neutron detection

N Polushin, A Laptev, S Chernykh and S Didenko

National university of science and technology “MISiS”, Moscow, Russia

CAMSTech-1028

Method of estimating the Pareto-optimal solutions based on the usefulness

E.V. Zargaryan, Y.A. Zargaryan, O.N. Sakharova, I.V. Kapc, I.M. Kalyakina and I.A. Dmitrieva

Southern Federal University, Don State Technical University, Rostov-on-Don, Russia

CAMSTech-1029

The effect of plasma electrolytic polishing on the surface properties of titanium alloy after plasma electrolytic chemical-thermal treatment

S A Kusmanov, I V Tambovskiy, S A Silkin, R V Nikiforov and P N Belkin

Kostroma State University, Kostroma, Russia

CAMSTech-1030

Construction and operation of linear constructions at the polygonal land relief, in the conditions of distribution of permafrost soil

Z Fazilova

Russian University of Transport (RUT MIIT)

CAMSTech-1031

Rank analysis of energy efficiency of diesel power plants of the Krasnoyarsk region

V I Panteleev, E Yu Sizganova, R A Petukhov, G A Pilyugin and S M Zilberman

Siberian Federal University, Krasnoyarsk, Russian Federation

CAMSTech-1032

Tribological properties of a plain bearing with a sleeve made of a nanostructured zirconia crystal

V V Alisin, M A Borik, A V Kulebyakin, E E Lomonova

Blagonravov Institute of Engineering Science, Russian Academy of Sciences; Prokhorov General Physics Institute, Russian Academy of Sciences, Moscow, Russia

CAMSTech-1033

Lubricants to reduce wear of wheels and rails high-speed rail transport

V Alisin, B Pokidko, M Roshchin and G Simakova

Mechanical Engineering Research Institute of the Russian Academy of Sciences; Russian Technical University, Colloid chemistry department, Russia, Moscow.

CAMSTech-1034

The study of variations in refractive indices of ZnSe single crystals in the range of 1.5-27 microns

E N Kotlikov ,Yu A Novikova and G V Tereshchenko

Saint Petersburg State University of Aerospace Instrumentation (SUAI), Saint Petersburg, Russia

CAMSTech-1035

The role of bound water in the process of low-temperature oxidation of aluminum powders

A V Mostovshchikov, A P Ilyin and A V Korshunov

Tomsk State University of Control Systems and Radioelectronics, National Research Tomsk Polytechnic University, Tomsk, Moscow State University of Civil Engineering, Moscow, Russia

CAMSTech-1036

Dynamic plastic deformation of metal-matrix composites

A S Kaygorodov and S V Zayats

Institute of Electrophysics UB RAS, Ekaterinburg, Russia

CAMSTech-1037

Transformations in aluminum oxyhydroxide under powerful short-pulse microwave radiation

A V Mostovshchikov, A P Ilyin and A V Korshunov

Tomsk State University of Control Systems and Radioelectronics, National Research Tomsk Polytechnic University, Tomsk, Moscow State University of Civil Engineering, Moscow, Russia

CAMSTech-1038

Theoretical evaluation of the performance of greases with additives

V V Ostrikov, S N Sazonov, M V Vigdorowitsch, A V Koshelev and V V Khatuntsev

Michurinsk state agrarian university, Michurinsk, Russia; All-Russian Scientific Research Institute for the Use of Machinery and Oil Products in Agriculture, Tambov, Russia; Angara GmbH, Dusseldorf, Germany

CAMSTech-1039

Electrical properties and fire resistance of LDPE/EVA/FLY ASH composite materials

Vu Minh Trong and Bui Dinh Hoan

Institute of Environment, Vietnam Maritime University, Le Chan district, Hai Phong, Viet Nam

CAMSTech-1040

Stability evaluation of cutting edges during operation of composite materials for instrumental purposes based on a metal matrix

A A Fedotov, M N Safonova, A S Syromyatnikova

North-Eastern Federal University, Yakutsk, Russian Federation; V.P. Larionov Institute of the Physical-Technical Problems of the North of the Siberian Branch of the RAS, Yakutsk, Russian Federation

CAMSTech-1041

Wireless Holter monitoring system with a dual-core processor

V P Ivel, Y V Gerasimova, S S Moldakhmetov, P А Petrov and I А Gerasimov

M. Kozybayev North-Kazakhstan State University, Petropavlovsk, Kazakhstan

CAMSTech-1042

Influence of temperature conditions on the shrinkage of wax patterns for investment casting

K V Nikitin, V N D'yachkov, V I Nikitin, A Yu Barinov and V B Deev

Samara State Technical University, Samara, Russia; Wuhan Textile University, Wuhan, China; National University of Science and Technology "MISIS", Moscow, Russia

CAMSTech-1043

The fractal approach and the effect of nanoadhesive in polymer nanocomposites

R I Lee, Y N Rizaeva, K A Manaenkov, D N Psarev, M R Kiba

Lipetsk state technical university, Lipetsk; Michurinsky state agrarian university, Michurinsk; Saint Petersburg state University of architecture and civil engineering, Saint Petersburg, Russia

CAMSTech-1044

The main factors influencing the processes in the microwave field

R R Daminev

Ufa State Petroleum Technological University, Ufa, Russia

CAMSTech-1045

The influence of the Friction Stir Welding process on the non-heat-hardenable aluminum alloy AA5056 structure formation depending on the sheet workpiece rolling direction

T A Kalashnikova and L L Zhukov

Institute of Strength Physics and Materials Sciences, SB RAS, Tomsk, Russia

CAMSTech-1046

Interaction of Sn-Cu-Co powder materials with diamond in liquid-phase sintering

E G Sokolov, A V Ozolin, S A Gaponenko and S A Arefieva

Kuban State Technological University, Krasnodar, Russia

CAMSTech-1047

Amphiphilic polymers of N-vinylpyrrolidone and their protective properties during the formation of metal nanoparticles

G Yu Ostaeva, I V Morenko, I Yu Isaeva, E A Eliseeva and A N Kuskov

Moscow Automobile and Road Construction State Technical University (MADI), Moscow, Russia; Mendeleev University of Chemical Technology of Russia, Moscow, Russia

CAMSTech-1048

Influence of structural form of elements on corrosion of metal structures

S N Gushchin

Vyatka State Agricultural Academy, Kirov, Russia

CAMSTech-1049

Polycrystalline diamond CVD-synthesis on modified silicon substrates from methane-hydrogen plasma

A L Maslov, N I Polushin, A I Laptev, E A Vysotina, T V Martynova

National University of Science and Technology “MISIS”, Moscow, Russia

CAMSTech-1050

Express-analysis of nitrogen content in CVD-diamonds by FTIR-spectrometry

T V Martynova, N I Polushin, A I Laptev and A L Maslov

National University of Science and Technology “MISIS”, Moscow, Russia

CAMSTech-1051

Growth of polycrystalline CVD-diamond and its defective structure

A L Maslov, N I Polushin, A I Laptev, E A Vysotina and T V Martynova

National University of Science and Technology “MISIS”, Moscow, Russia

CAMSTech-1052

Influence of polymer pseudo-matrix on the formation of copper nanoparticles on the steel surface

G Yu Ostaeva, I V Morenko, I Yu Isaeva and E A Eliseeva

Moscow Automobile and Road Construction State Technical University (MADI), Moscow, Russia

CAMSTech-1053

Study of the stability of the geometric dimensions of wax models of GTE blades using rapid prototyping technology

R A Vdovin

Samara University, Samara, Russia

CAMSTech-1054

Technological basis for the synthesis of polymer composite on the basis of highly filled with tungsten oxide polyimide matrix

R N Yastrebinsky, Z V Pavlenko and A V Yastrebinskaya

Belgorod State Technological University named after V.G. Shukhov

CAMSTech-1055

Specific surface defects arising from diamond CVD-synthesis from methane-hydrogen plasma

T V Martynova, N I Polushin, A I Laptev, E S Zakharova and A L Maslov

National University of Science and Technology “MISIS”, Moscow, Russia

CAMSTech-1056

Accumulated reliability of information hardware and software systems

E K Titov and V Ya Tsvetkov

Russian Technological University (RTU MIREA), Moscow, Russia; Research and Design Institute of design information, automation and communication on railway transport, Moscow, Russia

CAMSTech-1057

Study of the identification model of tribological interaction of friction couples

G M Ismailov,A E Tyurin, A N Gavrilin, V S Nevinitsyna , S A Lomovskaya

Tomsk State Pedagogical University, Tomsk, Russia Saint Petersburg National Research University of Information Technologies, Mechanics and Optics, St. Petersburg, Russia,Tomsk Polytechnic University, Tomsk, Russia

CAMSTech-1058

High-resolution lightweight dual-frequency aircraft synthesized aperture radar a for remote sensing of the Earth: implementation experience and development prospects

M E Rovkin, M S Samuleev, R V Ermakov, I V Djakov, M Yu Dostovalov and N D Malyutin

Tomsk State University of Control Systems and Radioelectronics, Tomsk, Russia; Research Institute of Precision Instruments, Moscow, Russia

CAMSTech-1059

Corrosion chemical mechanism in aggressive liquid of МАO coatings based on OT-4 titanium alloys

V A Mironova, M V Chizhevskaya, A V Girn, D V Ravodina, A E Mikheev and E V Khodenkova

Reshetnev Siberian State University of Science and Technology, Krasnoyarsk, Russia

CAMSTech-1060

Features of the effects of oriented plastic deformation in rectangular bars

S N Gushchin

Vyatka State Agricultural Academy, Kirov, Russia

CAMSTech-1061

Technological aspects of the use of fire-prevention roller shutters in places of permanent residence and temporary stay of people

V A Yakovlev, A N Semenova

North-Eastern Federal University, Yakutsk; North-Eastern Federal University, Yakutsk, Russia

CAMSTech-1062

Prospective helicopter crash-resistance fuel systems testing

S V Grachev, D I Smagin, R S Savelev and K S Napreenko

Moscow Aviation Institute (National Research University)

CAMSTech-1063

Automatic control of structural parts main parameters during mechanical testing of aircraft

V L Simonov, D Yu Eliseeva, O L Mnatsakanyan and T V Karyagina

Russian State Social University, Moscow, Russia

CAMSTech-1064

Optical fluorescent memory with a recording media based on 3- (thiophene-2-carbonyl) -2- (furan-2-yl) -4n-chromen-4-one

G E Adamov, V R Kurbangaleev, N O Poroshin, P B Malyshev, K S Levchenko, P S Shmelin and E P Grebennikov

JSC «Technomash», Enikolopov Institute of Synthetic Polymeric Materials of the Russian Academy of Sciences, Moscow, Russia.

Section 2. Mechanical engineering and automation of technological processes for Industry 4.0


CAMSTech-2001

Empirical data processing technique for studying the influence of technological parameters on tool feed during the final processing of steel and cast-iron workpieces

M G Galkin and A S Smagin

Ural Federal University, Ekaterinburg, Russia

CAMSTech-2002

Etermination of factors affecting the stability of cutting edge of thin lamellate knives

N R Barakaev, N F Urinov, M Kh Saidova and I A Sohibov

Bukhara engineering-technological institute, Bukhara, Uzbekistan

CAMSTech-2003

Modeling of the influence of technological parameters on surface quality, when processing a polymer material, according to a numerical experiment

M G Galkin, A S Smagin and A S Poupyreva

Ural Federal University, Ekaterinburg, Russia

CAMSTech-2004

Complementary industrial cyber-production

A V Shukalov, I O Zharinov, O O Zharinov

ITMO University, Saint Petersburg; Saint Petersburg State University of Aerospace Instrumentation, Saint Petersburg, Russia

CAMSTech-2005

Models for dispatching machine-building divisions

A N Bolotov and G B Burdo

Tver State Technical University

CAMSTech-2006

Approaches to standardization in the automatic control of water quality for water supply and wastewater systems

G A Sambursky

Russian Water and Wastewater Аssoсiation; MIREA – Russian Technological University; Technical Committee for standardization TC 343 «Water Quality» Rosstandart

CAMSTech-2007

Development of a methodology for evaluating the operational properties of elastic elements for various purposes by acoustic emission

E Yu Remshev, S A Voinash, G E Kokieva, I A Teterina, V A Sokolova, A S Krivonogova and Yu L Pushkov

PRO FERRUM Limited Liability Company, St. Petersburg, Russian Federation, Federal State Budgetary Educational Institution of Higher Education "Novosibirsk State Agrarian University", Novosibirsk, Russian Federation, Federal State Budgetary Educational Institution of Higher Education "Yakutsk State Agricultural Academy", Yakutsk, Russian Federation, Federal State Budgetary Educational Institution of Higher Education "Siberian State Automobile and Highway University (SibADI)", Omsk, Russian Federation, Federal State Budgetary Educational Institution of Higher Education "Saint Petersburg State Forest Technical University named after S.M. Kirov", St. Petersburg, Russian Federation

CAMSTech-2008

Analysis of the uniform distribution of herbicides in the interstitial zone with a rod with a deviating section

K A Manaenkov, V V Khatuntsev, A S Gordeev, A A Korotkov, V I Gorshenin

Michurinsk State Agrarian University, Michurinsk, Russia

CAMSTech-2009

Determination of the energy efficiency of drying hawthorn fruit in a drum dryer with a paddle mixing device

S Yu Shcherbakov, V A Babushkin, I P Krivolapov, P S Lazin end A A Korotkov

Michurinsk State Agrarian University, Michurinsk, Russia

CAMSTech-2010

Results of research on determining the coefficient of rolling resistance of the wheel by the rollback method

K V Novikov

Vyatka State Agricultural Academy, Kirov, Russia

CAMSTech-2011

Methodology of research and testing of internal combustion engines

V A Likhanov and O P Lopatin

Vyatka State Agricultural Academy, Kirov, Russia

CAMSTech-2012

Automatic cold edit control system of non-rigid shafts

O I Drachev, B M Gorshkov and N S Samokhina

Togliatti State University, Togliatti, Russia; Volga State University of Service, Togliatti, Russia

CAMSTech-2013

Model and calculation development of productivity of cotton harvesters

A. A. Rizaev, A. T. Yuldashev, D. A. Kuldashev

Institute of Mechanics and Seismic Stability of Structures of the Academy of Sciences of the Republic of Uzbekistan

CAMSTech-2014

Assessment of the level of digital transformation of fields of activity and industries

A A Yurieva, D E Morkovkin, A A Gibadullin, I V Osipova, O V Karamova and I I Hutarava

Institute of market problems of the Russian Academy of Sciences, Moscow, Russia; Financial University under the Government of the Russian Federation, Moscow, Russia; State University of Management, Moscow, Russia; Belarusian State University, Minsk, Belarus

CAMSTech-2015

Status and prospects of technical equipment of small enterprises in agricultural production

V. B. Dzuganov, Y A Shekikhachev, A Sh Teshev , M М Chehenov , V H Mishkhozhev

Kabardino-Balkarian state agricultural university named after V.M. Kokov; North Caucasus Research Institute of Mountain and Pre-mountain Horticulture, Nalchik, Russia

CAMSTech-2016

Research of the transient processes for discrete control systems

B R Kassimova, A U Sadvakassova, L Zh Sansyzbay

L.N.Gumilyov Eurasian National University, Nur-Sultan, Kazakhstan

CAMSTech-2017

Friction coefficient research at refining of fibrous semi-finished products

Vikharev S N

Department of technical mechanics and the equipment of pulp and paper industry, Ural State Forest Engineering University

CAMSTech-2018

Cyberphisical adaptive manufacturing control systems

V D Chertovskoy and V V Tsehanovsky

Department of Information Technology, State Electrotechnical University "LETI" of V.I. Ulyanov (Lenin), St. Petersburg, Russia

CAMSTech-2019

Universal MHD device for automation of casting control of aluminum

E S Kinev, A A Tyapin, E A Golovenko, A A Avdulov and S N Efimov

Thermal Electrical Systems LLC, Siberian Federal University, MHD Engineering LLC, Siberian Aerospace University, Krasnoyarsk, Russia

CAMSTech-2020

Technology for forming a multi-layer polymer coating when restoring worn-out landing holes in the body parts of equipment

R I Lee, Y N Rizaeva, D N Psarev, M R Kiba

Lipetsk state technical university, Lipetsk; Michurinsky state agrarian university, Michurinsk; Saint Petersburg state University of architecture and civil engineering, Saint Petersburg, Russia

CAMSTech-2021

Study of profilograph features for determining the geometric characteristics of products by laser scanning

S A Vasilyev, А А Fedorova and М A Vasiliev

Chuvash State University named after I.N. Ulyanov, Cheboksary, Russia

CAMSTech-2022

Algorithm for automatic classification of images of the processed surface by quality

D A Rastorguev and A A Sevastyanov

Togliatti State University, Togliatti City, Russian Federation

CAMSTech-2023

Simulation of layout schemes of soil-throwing machine-tractor units based on articulated load-bearing machines

M A Gnusov, M V Drapalyuk, M N Lysych, D Yu Druchinin and A F Petkov

Department Forest Industry, Metrology, Standardization and Certification, Voronezh State University of Forestry and Technologies named after G.F. Morozov, Voronezh, Russian Federation

CAMSTech-2024

Russian projects in tractor engineering intended for increasing the efficiency of agricultural production

T E Marinchenko

Rosinformagrotekh FSBSI, Pravdinsky township, Russia

CAMSTech-2025

Improving the efficiency of forest fire prevention and suppression with of forest fire machine

M A Gnusov, P I Popikov, S V Malyukov, N A Sherstyukov, A K Pozdnyakov

Department Forest Industry, Metrology, Standardization and Certification, Voronezh, State University of Forestry and Technologies named after G.F. Morozov, Voronezh, Russian Federation

CAMSTech-2026

New technologies to succeed the rooting process of rootstocks in agriculture engineering in Vitro

Ibragim M Bamatov, Zelimkhan V Kimaev and Dzhabrail M Bamatov

Chechen State University, Ltd "Scientific production firm "Sady Chechni", Grozny State Oil Technical University named after Academician M. D. Millionshchikov, Grozny: Russia

CAMSTech-2027

Influence of the natural gas composition and flue gas recirculation in a reverberatory furnace for nickel alloys

V E Quiroz Cabascango and V Yu Bazhin

Saint Petersburg Mining University

CAMSTech-2028

Selecting the shape of centroids of round and non-round gears

D A Kurasov

Kurgan State University, Kurgan region, Kurgan, Russia

CAMSTech-2029

Study of the possibility of upgrading the mechatronic system of an isotopic thickness gauge in a cold rolling mill

A Belyi

Moscow State University of Civil Engineering, Moscow, Russia; Financial University under the Government of the Russian Federation, Moscow, Russia

CAMSTech-2030

Control and remote monitoring of the vertical machining center by using the OPC UA protocol

G M Martinov, P A Nikishechkin, A Al Khoury and A Issa

Moscow State University of Technology "STANKIN", Moscow, Russia

CAMSTech-2031

Engineering methods and technologies of remote sensing in an economic entity for the transition to a highly productive agricultural sector

Ibragim M Bamatov and Ismail L Daudov

FGBNU FIC “V. V. Dokuchaev Soil Science Institute, Moscow; FGBOU VO "Chechen State University", 32, Sheripova str., Grozny, 364024.

CAMSTech-2032

Stabilization of the axisymmetric parts dimensions and shapes by the method of complex axial vibro-impacts

A V Bobrowskii, O I Drachev and L А Ugarova

Togliatti State University, Togliatti

Section 3. Cybernetics, economics and organization of mechanical engineering production


CAMSTech-3001

Improvement of the material and production resources control in the construction industry

M. Kh. Saidova, Sh. I. Xodjimuxamedova and M. A. Dadarbaev

Tashkent Institute of Irrigation and Agricultural Mechanization Engineers

CAMSTech-3002

Industrial business strategies towards a knowledge economy

A V Gurjanov, A V Shukalov, I O Zharinov

Stock Company «Experimental Design Bureau «Electroavtomatika» named after P A Yefimov, Saint Petersburg; ITMO University, Saint Petersburg, Russia

CAMSTech-3003

Monitoring of parameters of functional and cost analysis of personnel processes of the enterprise quality management system

O N Fedonin, A Z Simkin, T P Mozhaeva and A S Proskurin

Bryansk State Technical University, Bryansk, Russia

CAMSTech-3004

Methodology of determining benchmarks and indicators characterizing the functioning of the enterprise quality management system

A V Kirov

MIREA - Russian Technological University (RTU MIREA), Moscow, Russia Federation

CAMSTech-3005

Sharing model of industrial factories

A V Shukalov, I O Zharinov, O O Zharinov

ITMO University, Saint Petersburg; Saint Petersburg State University of Aerospace Instrumentation, Saint Petersburg, Russia

CAMSTech-3006

Assessment of the competitiveness of agricultural production enterprises

A J Toshboyev, N M. Mardiyev, I N Ziyadullayev, R B Azimov and A M Zakimov

Tashkent State Agrarian University, Karakalpak State University named after Berdakh, Uzbekistan

CAMSTech-3007

Optimizing supplier reserve stocks in the supply chain

O.V.MIlekhina, V.I.Mamonov

Novosibirsk State Technical University

CAMSTech-3008

Sustainability of public-private partnerships in the knowledge economy

A V Gurjanov, M O Kostishin, I O Zharinov

Stock Company «Experimental Design Bureau «Electroavtomatika» named after P A Yefimov, Saint Petersburg; ITMO University, Saint Petersburg, Russia

CAMSTech-3009

The choice of informative features based on heterogeneous functionals

N Mamatov, N A Niyozmatova, A Samijonov, B M Abdullayeva, Sh Juraev

Tashkent University Information Technologies named after Al-Kharezmi, Tashkent, Uzbekistan, Namangan State University, Namangan, Uzbekistan

CAMSTech-3010

Analysis of leasing efficiency for the lessor

Yuri V Kirillov

Novosibirsk State Technical University, Novosibirsk, Russia

CAMSTech-3011

Gradient method for determining non-informative features on the basis of a homogeneous criterion with a positive degree

A Samijonov, N Mamatov, N A Niyozmatova, Yu Yuldoshev, M Asraev

Tashkent University Information Technologies named after Al-Kharezmi, Tashkent, Uzbekistan, Namangan State University, Namangan, Uzbekistan

CAMSTech-3012

Satellite radio channels simulation methodology

A G Samoylov, S A X Nasir

Vladimir State University named after Alexander and Nikolay Stoletovs, Vladimir, Russian Federation

CAMSTech-3013

Method for selecting informative and non-informative features

N A Niyozmatova, N Mamatov, A Samijonov, E Rahmonov, Sh Juraev

Tashkent University Information Technologies named after Al-Kharezmi, Tashkent, Uzbekistan, Namangan State University, Namangan, Uzbekistan

CAMSTech-3014

An algorithm for determining the state of a non-stationary dynamic system for assessing fire safety control in an enterprise by the method of integrated indicators

S N Masaev, A N Minkin and D A Edimichev

Siberian Federal University, Krasnoyarsk, Russia

CAMSTech-3015

Training of quartering in digital control of overhaul

V V Tsyganov

V.A. Trapeznikov Institute of Control Sciences, Moscow, Russia

CAMSTech-3016

Method for assessing the economic sustainability of a high-tech corporation

E A Nesterov, A E Tuylin, A I Boginskiy and A A Chursin

JSC «Russian space system», JSC «Russian helicopters», Moscow, Russia

CAMSTech-3017

Fuzzy control in the simulation model of airport baggage handling systems

V A Romanenko, M A Skorokhod and E D Guzha

Samara National Research University, Samara, Russia

CAMSTech-3018

Features addition and dimensionality reduction in classification

D A Petrusevich

Russian Technological University

CAMSTech-3019

Intelligent analysis of complex innovative project prospects

M I Dli, O V Bulygina, A A Emelyanov and Yu V Selyavskiy

Branch of the National Research University “MPEI” in Smolensk; Smolensk institute of Plekhanov Russian University of Economics, Smolensk, Russia

CAMSTech-3020

The innovative development of the mechanical engineering

A S Tazetdinova and T A Bayaskalanova

Corporate Property and Transaction Department, Joint Stock Company “Verkhnechonskneftegaz”; Management Department, Federal State Budget Educational Institution of Higher Education “Irkutsk National Research Technical University”, Irkutsk, Russia

CAMSTech-3021

Efficiency of implementing the matrix management model in the enterprises of military-industrial complex

M A Ragozina, Yu A Anikina, Yu N Malanina, V A Yushmanova and N K Novoselsky

Reshetnev Siberian State University of Science and Technology, Krasnoyarsk; Siberian Federal University, Krasnoyarsk; Irkutsk State Transport University, Irkutsk, Russia

CAMSTech-3022

Electronic engineering resources in charts and comments

A I Galkina and I A Grishan

A. K. Aylamazyan IPS RAS, Veskovo village, Russia

CAMSTech-3023

Structural transformation in management of the enterprises of military-industrial complex

M A Ragozina, Yu A Anikina, Yu N Malanina, V A Yushmanova and N K Novoselsky

Reshetnev Siberian State University of Science and Technology, Krasnoyarsk; Siberian Federal University, Krasnoyarsk; Irkutsk State Transport University, Irkutsk, Russia

CAMSTech-3024

Development of a management system for the creation of radically new products

A V Yudin

RUDN University

CAMSTech-3025

Consensus achievement method for a robotic swarm about the most frequently feature of an environment

V I Petrenko, F B Tebueva, S S Ryabtsev, M M Gurchinsky and I V Struchkov

North-Caucasus Federal University, Stavropol, Russia

CAMSTech-3026

Interval regression models of a machine-building enterprise

S I Noskov, A S Vergasov , V O Zayanchukovskaya and N I Gluhov

Irkutsk State Transport University, Irkutsk, Russia

CAMSTech-3027

Problems of development of mechanical engineering production in state companies

A Yakovlev

State University of Management, Moscow, Russia; Diplomatic Academy of the Ministry of Foreign Affairs of the Russian Federation, Moscow, Russia

CAMSTech-3028

Control intellectualization of the induction soldering process for creating permanent joints

V S Tynchenko, A V Milov, A V Murygin and S O Kurashkin

Reshetnev Siberian State University of Science and Technology, Krasnoyarsk, Russian Federation

 

Section 4. Reliability and data protection in automated technological systems


CAMSTech-4001

A robust soft demapper algorithm for OFDM communication systems

K S Mityagin and A S Levchenko

Moscow Institute of Physics and Technology (National Research University), Dolgoprudny, Russia

CAMSTech-4002

Precising the evaluation of radio information system reliability characteristics based on the empirical failure distribution

I N Kartsan, A O Zhukov, A V Timoshenko, A Yu Perlov and D V Ryabchenko

Reshetnev Siberian State University of Science and Technology, Krasnoyarsk, Marine Hydrophysical Institute, Russian Academy of Sciences, Sevastopol, Institute of Astronomy of the Russian Academy of Sciences, Moscow, Shternberg State Astronomical Institute of Lomonosov Moscow State University, Moscow, Russian Technological University, Moscow, RTI company, Moscow, Russia

CAMSTech-4003

Digital media inventory algorithm for long-term digital keeping problem

A V Solovyev

Institute for Systems Analysis Federal Research Center “Computer Science and Control” of Russian Academy of Sciences, Moscow, Russia

CAMSTech-4004

Comparison between integer splitting cipher and traditional substitution ciphers, based on modular arithmetic

Amanie Hasn Alhussain

Information Technology Department, Peoples' Friendship University of Russia, Moscow, Russia.

CAMSTech-4005

Regeneration of information control systems

V T Matchin, A I Rogov and V Ya Tsvetkov

Russian Technological University ( RTU MIREA), Moscow, Russia; Research and Design Institute of design information, automation and communication on railway transport, Moscow, Russia

CAMSTech-4006

Method of determining the danger coefficient of actions of the information security offender of APCs

D Chernov and A Sychugov

Department of Information Security Tula State University Tula, Russia

CAMSTech-4007

New iteration parallel-based method for solving graph NP-complete problems with reconfigurable computing systems

A V Kasarkin, I I Levin and D A Sorokin

Southern Federal University, Taganrog, Russian Federation; Supercomputers and Neurocomputers Research Centre, LLC, Taganrog, Russian Federation

CAMSTech-4008

Operation algorithms and application of functional converters modulating voltage for generation of precision radio signals with angular modulation

S A Sherstukov, A N Buravtsova, D S Tolstykh and S S Pechnikov

Voronezh Institute of the Russian Ministry of the Interior, Voronezh, Russian Federation

CAMSTech-4009

On improving indicators for assessing the decision support systems' software quality

O V Tikhanychev

Company group "Technoserv", Moscow, Russia

CAMSTech-4010

Building a model of information signal propagation in a real electromagnetic communication channel

V N Pichugin and A A Soldatov

Chuvash state university is named after Ilya Nikolayevich Ulyanov, Cheboksary, Russia; PAO “MRSK of Volga”-“Chuvashenergo”,Cheboksary, Russia

CAMSTech-4011

Bio-inspired information technology for multi-version design of highly reliable software systems

I V Kovalev, D I Kovalev, N A Testoyedov, A A Voroshilova, A S Kuznetsov and A A Koltashev

Siberian Federal University, Krasnoyarsk State Agrarian University, Reshetnev Siberian State University of Science and Technology, Krasnoyarsk, Russia, China Aviation Industry General Aircraft Zhejiang Institute Co., Ltd, China, JSC “Academician M F Reshetnev Information satellite systems”, Zheleznogorsk, Krasnoyarsk region, Krasnoyarsk Science and Technology City Hall, Russia

CAMSTech-4012

The application of relational interactive logic to build logical triggers in event-driven systems

D V Zakharov, D A Naumov and O V Kuzmin

Irkutsk State University, Irkutsk, Russia; Irkutsk National Technical Research University, Irkutsk, Russia

CAMSTech-4013

An ontology-based knowledge representation in the field of cognitive function assessments

M S Murtazina and T V Avdeenko

Novosibirsk State Technical University, Novosibirsk, Russia

CAMSTech-4014

Client-server application framework based on an object-oriented network model

E L Romanov, G V Troshina and S А Menzhulin

Novosibirsk State Technical University, Novosibirsk, Russia

CAMSTech-4015

Self-organizing technology for substantiating the properties of strength reliability of complex mechanical systems

A F Berman and O A Nikolaichuk

Matrosov Institute for System Dynamics and Control Theory SB RAS (ISDCT SB RAS), Irkutsk, Russia

CAMSTech-4016

Influence of different components of data error on the result of solving identification and approximation problems

V P Zhitnikov, R R Muksimova, N M Sherykhalina and N I Zhitnikova

Ufa State Aviation Technical University, Ufa, Russia; Saint Petersburg State University of Civil Aviation, Saint Petersburg, Russia

CAMSTech-4017

An experimental research of the ultra-wideband pulse propagation in a transdirectional coupler based on coupled striplines

N D Malyutin, E I Trenkal and A N Sychev

Tomsk State University of Control System and Radioelectronics, Tomsk, Russian Federation

CAMSTech-4018

The antenna system with signal polarization separation

M O Konovalenko, V V Sokolov, E I Trenkal and N D Malyutin

Tomsk State University of Control System and Radioelectronics (TUSUR), Tomsk, Russia; Micran JSC, Tomsk, Russia

CAMSTech-4019

The micro-architectures co-design of neuroprocessing cyberphysical systems

V Ruchkin, B Kostro and E Ruchkina

Ryazan State University, Ryazan, Russia; Ryazan State Radio-Engineering University, Ryazan, Russia

CAMSTech-4020

Technological aspects of the communication channels development for data transmission in the aircraft monitoring system

I V Kovalev, A S Andronov, N A Testoyedov, M V Karaseva, A K Shatrov and V A Bartenev

Siberian Federal University, Krasnoyarsk State Agrarian University, Krasnoyarsk, Russia, China Aviation Industry General Aircraft Zhejiang Institute Co., Ltd, China, Reshetnev Siberian State University of Science and Technology, Krasnoyarsk complex aviation rescue center EMERCOM of Russia, Krasnoyarsk, JSC “Academician M F Reshetnev Information satellite systems”, Zheleznogorsk, Krasnoyarsk region, Russia

CAMSTech-4021

Innovation technologies and practical engineering solutions for smart city development

Sergey D. Proskurnin, Galina Y. Belyakova

Administration CATF Zheleznogorsk, Siberian Federal University, Krasnoyarsk,Russia,

CAMSTech-4022

Studying the switching order for a three-wire structure with modal reservation after failures

A V Medvedev

Tomsk State University of Control Systems and Radioelectronics, Tomsk Russian Federation

CAMSTech-4023

Use of a progressive web application for working with Earth remote sensing, topographic and cadastral data layers

I Ginzburg and S Padalko

Moscow Aviation Institute (National Research University), Moscow, Russia

CAMSTech-4024

Software and algorithmic support of the electron-beam welding system

V S Tynchenko, V E Petrenko, A V Murygin and S O Kurashkin

Reshetnev Siberian State University of Science and Technology, Krasnoyarsk, Russian Federation

 

Section 5. Mathematical methods in engineering and technology


CAMSTech-5001

Mathematical simulation of the process of forecasting the fire hazard properties of substances

D S Korolev, A V Vytovtov, D V Kargashilov, A A Odnolko and I V Sitnikov

Voronezh State Technical University, Voronezh institute of increasing the qualifications of staff of the state fire-fighting service of the ministry of the Russian Federation

CAMSTech-5002

Mathematical modeling of the impulse bubbling process of bulk mass by the coolant flow

I L Rogovskii, I P Palamarchuk, S V Kiurchev, V O Verkholantseva, S A Voinash, V A Sokolova and A S Gogolevski

National University of Life and Environmental Sciences of Ukraine, Kyiv, Ukraine Tavria State Agrotechnological University named after Dmytro Motornyi, Melitopol, Ukraine Novosibirsk State Agrarian University, Novosibirsk, Russian Federation St. Petersburg State Forestry University named after S.M. Kirov, Saint-Petersburg, Russian Federation Federal State Budgetary Military Educational Institution of Higher Education «The Mozhaisky Military Space Academy» of the Ministry of Defence of the Russian Federation, Saint-Petersburg, Russian Federation

CAMSTech-5003

Fuzzy quality evaluation of the information system

V A Smirnov, V M Milova, G V Getmanova and V V Kurlov

Saint Petersburg State University of Aerospace Instrumentation, Saint Petersburg State University of Industrial Technology and Design, St.Petersburg, Russia

CAMSTech-5004

Bayesian model for evaluating the pragmatic efficiency of an information system of technological control

V A Smirnov, V M Milova, N V Milova and M S Smirnova

Saint Petersburg State University of Aerospace Instrumentation, Saint Petersburg, Russia

CAMSTech-5005

Simulating of the heat conduction processes and their impact on the stress-strain state of the continuously welded rail structure

Z Fazilova, А Loktev and V Shapran

Russian University of Transport (MIIT) ; Vorkuta permanent way division of the Northern Infrastructure Directorate of JSC «RZD»

CAMSTech-5006

Practical application of variance analysis of four-factor experience data as a technology of scientific research

N V Kartechina, L V Bobrovich, L I Nikonorova, N V Pchelinceva, R N Abaluev

Michurinsk State Agrarian University, Michurinsk, Russia

CAMSTech-5007

Super diffraction resolution of coherent signals in angular coordinates in antenna arrays

L A Litvinchuk T P Mishura and O L Kozlova

St-Petersburg State University of Aerospace Instrumentation St-Petersburg, Russia

CAMSTech-5008

Mathematical model for an identifying flaming combustions and accidents by an unmanned aerial vehicle at oil and gas industry facilities

A V Vytovtov, D S Korolev, R V Barankevich, I V Sitnikov and D V Russkikh

Voronezh State Technical University, Voronezh, Russia; Voronezh institute of Advanced Training of Employees of the EMERCOM of Russia, Voronezh, Russia; General Directorate of EMERCOM of Russia in the Voronezh region, Voronezh, Russia; SFA of EMERCOM of Russia, Moscow, Russia

CAMSTech-5009

Mathematical problem in the construction of kinetic equations of alternative fuel oxidation in an internal combustion engine

O P Lopatin

Vyatka State Agricultural Academy, Kirov, Russia

CAMSTech-5010

Discussion of cloud CAD software testing approach

E Y Galimova

Octavian.SPb company, Saint-Petersburg, Russian Federation; Saint-Petersburg State University of Industrial Technologies and Design, Saint-Petersburg, Russian Federation

CAMSTech-5011

The results of mathematical modeling of the operating modes of the feller machine

D V Chernik, A A Karelina, R V Kazancev and M M Litvinova

Reshetnev Siberian State University of Science and Technology, Krasnoyarsk, Russia

CAMSTech-5012

Production technology and mathematical method for modeling the formulation of fruit and jelly candies enriched with collagen

O M Blinnikova, V A Babushkin, V V Akindinov, O V Perfilova and I M Novikova

Michurinsk State Agrarian University, Michurinsk, Russia

CAMSTech-5013

Mathematical model of a combined manipulator of a forest machine

D V Chernik and K N Chernik

Reshetnev Siberian State University of Science and Technology, Krasnoyarsk, Russia

CAMSTech-5014

Modeling of nitrogen oxides formation in a diesel

V N Kopchikov and A V Fominykh

Vyatka State Agricultural Academy

CAMSTech-5015

Theoretical research on electromagnetic wave propagation in plasma

I V Kudinov, A V Eremin, V A Kudinov, G V Mikheeva

Samara State Technical University, Russia

CAMSTech-5016

Chaotic modes of a non-linear fractional oscillator

R I Parovik

Institute of Cosmophysical Research and Radio Wave Propagation FEB RAS, Paratunka, Russia

CAMSTech-5017

Fuzzy regression model with input and output Z-numbers

O M Poleshchuk

Bauman Moscow State Technical University, Moscow, Russia

CAMSTech-5018

Modeling of transient operating modes in low-power boilers with high-temperature fluidized bed

A V Bondarev, S V Sarkisov, V N Tarasov, V A Vakunenko, N A Biryukov

Military Institute (engineering) of the Military Academy logistics support named after Army General A. V Hrulev, Saint Petersburg Mining University, St. Petersburg, Russia

CAMSTech-5019

Parametric method for evaluation the state of self-government

Kh J Rakhimboev, M A Ismailov, O U Khalmurotov.

Urgench branch of Tashkent University of Information Technologies named after Muhammad al-Khwarizmi, Urgench, Uzbekistan; Research and innovation centre of information and communication technologies at Tashkent University of Information Technologies, Tashkent, Uzbekistan

CAMSTech-5020

Modeling of a strategy for developing a lean organizational structure for managing a petrochemical enterprise

N V Barsegyan, S S Kudryavtseva and L N Ivanova

Kazan National Research Technological University, Kazan, Russia

CAMSTech-5021

Dissipative mathematical model of heat transfer in channels with process intensifiers

A. G. Laptev, T. M. Farakhov, E. A. Lapteva

Kazan state power engineering University

CAMSTech-5022

Mathematical justification of the mechanism of dust deposition by electrofilters for improving working conditions of poultry farm workers

N IChepelev; N G Cherkasova

Krasnoyarsk State Agrarian University, Krasnoyarsk,Russia; Reshetnev Siberian State University of Science and Technology, Krasnoyarsk,Russia

CAMSTech-5023

A method for data analysis in algebraic structures

A.A. Shlepkin I.V. Sabodakh K.A. Filippov

Siberian federal university

CAMSTech-5024

Laser shock processing of metal surfaces with cracks

G Zh Sakhvadze and M S Pugachev

Institute of Machine Science named by A.A.Blagonravov Russian Academy of Sciences, Moscow, Russia

CAMSTech-5025

Subsidiary computations

V Ya Tsvetkov and A V Kozlov

Research and Design Institute of design information, automation and communication on railway transport, Moscow, Russia; Russian Technological University ( RTU MIREA), Moscow, Russia

CAMSTech-5026

Scheduling of the independent projects

A V Kalach, L V Rossihina, A A Melnik, S V Sharapov and N M Loran

Voronezh Institute of the Federal Penitentiary Service of Russia, Voronezh, Russia; Ural Institute of State Fire Service of EMERCOM of Russia, Ekaterinburg, Russia; Saint-Petersburg University of EMERCOM of Russia, Saint-Petersburg, Russia

CAMSTech-5027

The spectral curve method for the Kaup-Newell hierarchy

A O Smirnov, E G Filimonova and V B Matveev

Sankt-Petersburg State University of Aerospace Instrumentation; Sankt-Petersburg Department of Steklov Mathematical Institute Russian Academy of Sciences, St-Petersburg, Russia; Institut de Mathematiques de Bourgogne (IMB), Universite de Bourgogne - Franche Comte, Dijon, France

CAMSTech-5028

Derivation of transport equations for dissipation and vorticity from modified equations for small-scale velocity

A M Balonishnikov, J A Balonishnikova and J V Kruchkova

Saint-Petersburg State University of Aerospace Instrumentation, St. Petersburg, Russia; State Hydrological Institute< St. Petersburg, Russia; University of the Ministry of Internal Affairs of St.Petersburg, St.Petersburg, Russia

CAMSTech-5029

Modular-geometric approach to modeling a complex shape surface

E A Belkin, V N Poyarkov and O I Marko

Bolhov Plant of semiconductor devices Bolhov, Bolkhov, Russia; Oryol State University, Orel, Russia

CAMSTech-5030

Brachistochrone of weakly connected graphs

R Dzerzhinsky and O Mitina

MIREA – Russian Technological University, Moscow, Russia

CAMSTech-5031

Mathematical methods for planning energy-efficient motion path of the manipulator anthropomorphic robot for the typical obstacles

V I Petrenko, F B Tebueva, V O Antonov and M M Gurchinsky

North Caucasus Federal University, Stavropol, Russia

CAMSTech-5032

Application of DEA models in efficiency evaluation of the KAMAZ vehicle robotic system

S V Susarev and S P Orlov

Samara State Technical University

CAMSTech-5033

The effective algorithms for estimating the signal and image shift

A V Terekhov, A A Makarov and K A Melnikov

Department of Electronics and Nanoelectronics, National Research University “MPEI”, Moscow, Russia; International Laboratory of Statistics of Stochastic Processes and Quantitative Finance, National Research Tomsk State University, Tomsk, Russia

CAMSTech-5034

Mazes creation for further study of swarm intelligence

A V Dagaev, A A Sorokin, R A Kovalenko and E A Yakovleva

Ivangorods branch of SUAI, Ivangorod, Russia

CAMSTech-5035

Modeling of ultrasonic drilling of hard formation in the conditions on the Moon surface

V N Khmelev, R N Golykh, E A Es’kov, S Jiang, J Liu and Q Quan

Biysk Technological Institute (branch) of Altai State Technical University named after I.I. Polzunov, Biysk, Russian Federation; Harbin Institute of Technology, Harbin, China

CAMSTech-5036

A long period quasi-random sequences false synchronization probability estimation under organized interference conditions

E V Melnikov, I M Azhmukhamedov and F G Hisamov

Astrakhan State Technical University, Astrakhan, Russian Federation; Kuban Institute of Information Protection, Krasnodar, Russian Federation

CAMSTech-5037

The problem of equality in the class of bracketed languages and its use in automation systems for building compilers

B F Melnikov and A A Melnikova

Shenzhen MSU – BIT University, Shenzhen, China; Dimitrovgrad Engineering and Technology Institute – Branch of National Research Nuclear University “MEPhI”, Dimitrovgrad, Russia

CAMSTech-5038

Mathematical modeling of management processes in agricultural engineering systems

S O Siptits and N E Evdokimova

Nikonov All-Russian Institute of Agrarian Problems and Informatics, Federal Scientific Center of Agrarian Economics and Social Development of Rural Territories, All-Russian Research Institute of Agricultural Economics

CAMSTech-5039

Mathematical model of fire load type identification by electromagnetic radiation of the optical range using an unmanned aerial vehicle at oil and gas industry facilities

A V Vytovtov, D S Korolev, A A Odnolko, S D Nikolenko and V A Vytovtov

Voronezh State Technical University, Voronezh, Russia; Voronezh institute of Advanced Training of Employees of the EMERCOM of Russia, Voronezh, Russia; Federal Agricultural Kursk Center, Kursk, Russia

Section 6. Energy, chemical technologies and ecological engineering


CAMSTech-6001

Detonation combustion in a dual-circuit ejector pulsating jet engine

K. V. Migalin, A.G. Egorov, K. A. Sidenko

Scientific and Production Firm "Rotor:Togliatti State University,Tolyatti, Russia

CAMSTech-6002

Environmental engineering approach for ecologization of plant protection systems

A K Apazhev, V N Berbekov, Y A Shekikhachev, L M Hazhmetov, G H Bakuev and L Z Shekikhacheva

Kabardino-Balkarian state agricultural university named after V.M. Kokov; North Caucasus Research Institute of Mountain and Pre-mountain Horticulture, Nalchik, Russia

CAMSTech-6003

The cyber-production syndinical situation

A V Gurjanov, A V Shukalov, I O Zharinov

Stock Company «Experimental Design Bureau «Electroavtomatika» named after P A Yefimov, Saint Petersburg; ITMO University, Saint Petersburg, Russia

CAMSTech-6004

Features of the development of fuel flares when running diesel on alcohol

V A Likhanov and O P Lopatin

Vyatka State Agricultural Academy, Kirov, Russia

CAMSTech-6005

Investigation of alternative fuel oxidation kinetics in an internal combustion engine

O P Lopatin

Vyatka State Agricultural Academy, Kirov, Russia

CAMSTech-6006

Analysis of electric power technologies in industrial production

N A Testoyedov, I A Potapenko, N M Lugovaya, V V Kukartsev and M V Karaseva

Reshetnev Siberian State University of Science and Technology, Krasnoyarsk, JSC “Academician M F Reshetnev Information satellite systems”, Zheleznogorsk, Krasnoyarsk region, Siberian Federal University, Krasnoyarsk, Russia

CAMSTech-6007

Estimation of economic damage in the difference of the transformer loading factor

A S Lukovenko, T V Radionov, V V Kukartsev, N A Testoyedov and M V Karaseva

Reshetnev Siberian State University of Science and Technology, Siberian Federal University, Krasnoyarsk, JSC “Academician M F Reshetnev Information satellite systems”, Zheleznogorsk, Krasnoyarsk region, Russia

CAMSTech-6008

Method of calculating the working process of the engine when working on methanol

V A Likhanov and O P Lopatin

Vyatka State Agricultural Academy, Kirov, Russia

CAMSTech-6009

Determination the capacity of low volume mixers for processing liquid environment

E V Boev, V G Afanasenko and M S Luzina

Ufa State Petroleum Technological University

CAMSTech-6010

Еfficiency of diesel operation on biofuels

V A Likhanov, A V Fominykh and V N Kopchikov

Vyatka State Agricultural Academy

CAMSTech-6011

Calculation of the process of nitrogen oxides formation during combustion of methanol in the engine

O P Lopatin

Vyatka State Agricultural Academy, Kirov, Russia

CAMSTech-6012

Еnvironmental performance of biofuel engine

V A Likhanov, V N Kopchikov and A V Fominykh

Vyatka State Agricultural Academy

CAMSTech-6013

Methods for evaluating the performance of industrial cooling tower sprinklers

E V Boev and N I Boeva

Ufa State Petroleum Technological University

CAMSTech-6014

Improvement of fire retardant properties of wood materials

A M Gazizov, O V Kuzntsova, A A Sharafutdinov and K M Shaimuhametova

Ufa State Petroleum Technological University, Ufa, Russia; Ural State Forest Engineering University, Ekaterinburg, Russia; Ufa State Petroleum Technological University, Ufa, Russia; Ufa State Petroleum Technological University, Ufa, Russia

CAMSTech-6015

Alternative fuels and assessment of their applicability in internal combustion engines

V N Kopchikov

Vyatka State Agricultural Academy, Kirov, Russia

CAMSTech-6016

Investigation of heat and mass exchange characteristics of packing devices of industrial cooling tower sprinklers

E V Boev and N I Boeva

Ufa State Petroleum Technological University

CAMSTech-6017

Methanol as the main substitute for petroleum fuels

A V Fominykh

Vyatka State Agricultural Academy, Kirov, Russia

CAMSTech-6018

Monitoring the reliability and efficiency of the electricity industry

A A Gibadullin, A A Yurieva, D E Morkovkin and N I Isaichykova

State University of Management, Moscow, Russia; Institute of market problems of the Russian Academy of Sciences, Moscow, Russia; Financial University under the Government of the Russian Federation, Moscow, Russian Federation; Gomel State Technical University named after P.O. Sukhoi, Gomel, Republic of Belarus

CAMSTech-6019

Aeroecology of audience with split systems

I N Lykov, S A Kusacheva and M E Safronova

Institute of Natural Kaluga State University named after K.E. Tsiolkovsky, Kaluga, Russia; Moscow State Technical University named after N.E. Bauman, Kaluga branch, Kaluga, Russia

CAMSTech-6020

Alternative fuel engine duty cycle

А А Аnfilatov

Vyatka State Agricultural Academy, Kirov, Russia

CAMSTech-6021

Speed characteristics of a diesel running on biofuel

A V Fominykh and V N Kopchikov

Vyatka State Agricultural Academy

CAMSTech-6022

Influence of emulsion fuel on the composition of dispersed particles

V A Likhanov and А А Аnfilatov

Vyatka State Agricultural Academy, Kirov, Russia

CAMSTech-6023

Russian oil company productive and economic activity optimal control mathematical modeling

К V Ketova

Kalashnikov Izhevsk State Technical University, Izhevsk, Russia

CAMSTech-6024

Calculated studies of the influence of the composition of biofuels on the formation of indicator efficiency

V A Likhanov and А А Аnfilatov

Vyatka State Agricultural Academy, Kirov, Russia

CAMSTech-6025

Stimulating tariff formation models for reactive power flows and electricity quality control

A V Kuznetsov and V V Chikin

Ulyanovsk State Technical University, Ulyanovsk, Russia

CAMSTech-6026

Analysis of the operation of the diesel engine on rapeseed oil

А А Аnfilatov

Vyatka State Agricultural Academy, Kirov, Russia

CAMSTech-6027

Beneficial use of thermal secondary energy resources in the rectification cycle at ethylene glycol production unit

D S Balzamov, E Yu Balzamova, V V Bronskaya, E A Rybkina and O S Kharitonova

Kazan State Power Engineering University, Kazan National Research Technological University, Kazan Federal University, Kazan, Russia

CAMSTech-6028

Environmental indicators of harmful emissions when working on mixed biofuels

V A Likhanov and А А Аnfilatov

Vyatka State Agricultural Academy, Kirov, Russia

CAMSTech-6029

Organization of the fuel heating reserve system on the basis of associated petroleum gas

D S Balzamov, E Yu Balzamova, V V Bronskaya and O S Kharitonova

Kazan State Power Engineering University, Kazan National Research Technological University, Kazan, Russia

CAMSTech-6030

Analysis of the key design features of low-power turbines for electricity generation

A A Kishkin, Yu N Shevchenko and A V Delkov

Reshetnev Siberian State University of Science and Technology

CAMSTech-6031

Features of the stages of heterogeneous catalytic processes under the influence of microwave radiation

R R Daminev

Ufa State Petroleum Technological University, Ufa, Russia

CAMSTech-6032

Directions of development of digitalization of the oil industry in the Russian Federation

N S Kulyasov, O T Shipkova, A E Zavialov and G D Charyyarova

State University of Management, Moscow; National University of Science and Technology MISIS, Moscow; Peoples’ Friendship University of Russia (RUDN University), Moscow, Russian Federation

CAMSTech-6033

Studying of properties of low-viscous fuel oil for the purpose of its utilization

R R Daminev, A A Islamutdinova, I V Ovsyannikova

Ufa State Petroleum Technological University, Ufa, Russia

CAMSTech-6034

Justification of methods for reducing ground-level gas pollution from operating aircraft engines

A V Zvyagintseva, S A Sazonova and V V Kulneva

Voronezh State Technical University, Voronezh, Russia

CAMSTech-6035

Utilization of the vat residues of butyl alcohols with receiving phthalate softener

R F Nafikova, A A Islamutdinova, I V Ovsyannikova

Ufa State Petroleum Technological University, Ufa, Russia

CAMSTech-6036

Modeling of metalwork and welding technological processes

A V Zvyagintseva, S A Sazonova and V V Kulneva

Voronezh State Technical University, Voronezh, Russia

CAMSTech-6037

Recycling of polymer materials for foundry patterns

D V Sukhorukov, A A Kreshchik, V N Sharshin and E V Sukhorukova

Vladimir State University named after Alexander and Nikolay Stoletovs, Vladimir, Russian Federation

CAMSTech-6038

Microbiological diagnosis of chernozem leached in agrocenoses of the Krasnoyarsk forest-steppe

N V Fomina

Krasnoyarsk State Agrarian University, Krasnoyarsk, Russia

CAMSTech-6039

About the interchangeability of iron-manganese nodules of the Pacific And The Baltic Sea

M A Sulimova

Saint Petersburg Mining University

CAMSTech-6040

Determination of heat- and mass transfer coefficients in small-size apparatuses of recycled water cooling

K E Bondar, N S Shulaev, S V Laponov and D F Suleymanov

Ufa State Petroleum Technological University, Branch in the Sterlitamak

CAMSTech-6041

Structure of electric power generation from different resources in Russia

V.N. Kernitskii, V V Kukartsev, D S Shalaeva, E I Semenova, K A Bashmur and S V Apanasenko

Reshetnev Siberian State University of Science and Technology; Siberian Federal University, Krasnoyarsk, Russian Federation

CAMSTech-6042

Development of the decision support system for ecological safety of Arctic communications

V V Bystrov and D N Khaliullina

Institute for Informatics And Mathematical Modeling Kola Science Centre of the Russian Academy of Sciences, Apatity, Russia

CAMSTech-6043

Pulse voltage stabilizer controlled by a microcontroller

S N Titovskii, T S Titovskaya and N V Titovskaya

Krasnoyarsk State Agrarian University; Siberian Federal University, Krasnoyarsk, Russia

CAMSTech-6044

Ecological and economic evaluation of development of Kumuhsky deposit of thermal waters

D K Dzhavatov and A A Azizov

Institute of Geothermy and renewable energy-branch of the Federal state budgetary institution of science of the joint Institute of high temperatures of the Russian Academy of Sciences, Makhachkala, Russia; Dagestan state University, Makhachkala, Russia

CAMSTech-6045

Method vertical seismic profiling and evaluation of producibility of Miocene deposits in Hovsan oilfield

T R Ahmadov and A M Amirov

Azerbaijan State Oil and Industry University, Baku, Republic of Azerbaijan

CAMSTech-6046

Algomonitoring of chernozem leached in agrocenoses of the forest-steppe of the Krasnoyarsk Territory

Natalya V Fomina

Krasnoyarsk State Agrarian University, Krasnoyarsk, Russia

CAMSTech-6047

The mechanical mounder technological parameters justification

A M Tsypouk, A V Rodionov and L P Pekki

Petrozavodsk State University, Petrozavodsk, Russian Federation

CAMSTech-6048

Using electrodes with high active electrical resistance as a way to increase the productivity of an ozone generator based on dielectric barrier discharge

V V Andreev, G A Kravchenko, A N Matyunin and Yu P Pichugin

Chuvash State University, Cheboksary, Russia

CAMSTech-6049

Environmental assessment of the quality of the elek and or rivers in the zone of influence of enrichment waste and metallurgical production

A K Kairakbaev, V Z Abdrakhimov and E S Abdrakhimova

Zerek Technopark, Baishev University, Aktobe, Kazakhstan; Samara State Space University, Samara, Russia; Samara State University of Economics, Samara, Russia

CAMSTech-6050

Formation of greenbelts as an environmental protection tool

V V Oznamets and G V Belokonev

Federal State Budgetary Institution of Higher Education Moscow State University of Geodesy and Cartography (MIIGAiK), Moscow, Russia

CAMSTech-6051

About functioning of radioelectronic equipment in the arctic and far north climatic conditions

P S Budyakov, A I Gawlicky, L V Cherckesova and I V Pakhomov

JSC “NPP” Pulsar”, Moscow, Russia; Don State Technical University, Rostov-on-Don, Russia

CAMSTech-6052

To the forecast of residual resource installation of electric centrifugal pump for oil production

A S Topolnikov, I K Gimaltdinov, A A Gimaltdinova and E Y Kochanova

LLC RN-BashNIPIneft, Ufa, Russia; Ufa State Petroleum Technological University, Ufa, Russia

CAMSTech-6053

Analytical calculations of the parameters of pollutant emissions and the justification of methods for reducing surface gas pollution from working aircraft engines

A V Zvyagintseva, V V Kulneva and S A Sazonova

Voronezh State Technical University, Voronezh, Russia

CAMSTech-6054

Potential possibilities of hydrogen accumulation in Nickel-based solid-state materials

A V Zvyagintseva

Voronezh State Technical University, Voronezh, Russia

CAMSTech-6055

Reflection of acoustic waves from a bubble screen in water with hydrate bubbles

I K Gimaltdinov, I G Khusainov, G Y Khusainova and A A Gimaltdinova

Ufa State Petroleum Technological University, Ufa, Russia; Sterlitamak Branch Bashkir State University, Sterlitamak, Russia

CAMSTech-6056

Application of polyurethane, rubber and aluminum as materials for the production of the dome separator

A S Chiglintseva, A A Nasyrov and I A Chiglintsev

Ufa State Petroleum Technological University, Ufa, Russia; Birsk branch of Bashkir State University, Birsk, Russia

CAMSTech-6057

On the decomposition of gas hydrate at a positive temperature

B I Tazetdinov, A S Chiglintseva, I K Gimaltdinov and E Y Kochanova

Ufa State Petroleum Technological University, Ufa, Russia

CAMSTech-6058

Environmental assessment of the impact of the meteorological conditions on technogenic formaldehyde and carbon black pollution of the air in Voronezh

S A Kurolap, O V Klepikov and S A Yeprintsev

Voronezh State University, Voronezh, Russia

CAMSTech-6059

The use of ash and slag material from the Aktobe thermal power plant in the production of porous aggregates based on liquid glass compositions contributes to the development of a green economy

A K Kairakbaev, V Z Abdrakhimov and E S Abdrakhimova

Zerek Technopark, Baishev University, Aktobe, Kazakhstan; Samara State Space University, Samara, Russia; Samara State University of Economics, Samara, Russia

CAMSTech-6060

On the issue of initiation of bubble detonation by small-amplitude waves

I K Gimaltdinov, A A Gizzatullina and A A Gimaltdinova

Ufa State Petroleum Technological University, Ufa, Russia

CAMSTech-6061

Revising the effectiveness of thermal method application for unconventional bitumen oil production stimulation

A A Gizzatullina and Yu A Tazetdinova

Ufa State Petroleum Technological University, Ufa, Russia; Birsk branch of the Bashkir State University, Birsk, Russia

CAMSTech-6062

The dynamics of sound waves in a tube with elastic walls filled with gas-liquid mixture

I K Gimaltdinov, A A Gizzatullina and A A Gimaltdinova

Ufa State Petroleum Technological University, Ufa, Russia

CAMSTech-6063

Mathematical modelling of pump station

K D Semenova, N V Savosteenko, N M Maksimov and N A Belov

South Ural State University, Chelyabinsk, Russia

CAMSTech-6064

Analysis of anthropogenic contamination of soils by petroleum products

L N Zhichkina, V V Nosov, K A Zhichkin, L P Bespamjatnova, O A Grunina and A A Grunina

Samara State Agrarian University, Samara, Russia; K.G. Razumovsky Moscow State University of technologies and management, Moscow, Russia; Samara State Agrarian University, Samara, Russia; K.G. Razumovsky Moscow State University of technologies and management; K.G. Razumovsky Moscow State University of technologies and management; K.G. Razumovsky Moscow State University of technologies and management, Moscow, Russia

CAMSTech-6065

Optimization of flywheel for starter-generator base on the differential electric drive

N M Maksimov, N V Savosteenko, K D Semenova and N A Belov

South Ural State University

CAMSTech-6066

Geodetic support for the landscape environmental studies

V V Oznamets

Moscow State University of Geodesy and Cartography (MIIGAiK), Moscow, Russia

CAMSTech-6067

Mathematical modeling of the temperature regime in a ventilated pile of sugar beet

A I Zavrazhnov, N V Zuglenok, A A Zavrazhnov, S S Tolstoshein, SM Koltsov

Michurinsk State Agrarian University, Michurinsk, Krasnoyarsk State Agrarian University, Krasnoyarsk, Tambov State Technical University, Tambov, Russia

CAMSTech-6068

To the question of modeling processes in oil-producing a well during short periodic operation by electric centrifugal pump installations

A S Topolnikov, I K Gimaltdinov, A A Gimaltdinova and E Y Kochanova

LLC RN-BashNIPIneft, Ufa, Russia; Ufa State Petroleum Technological University, Ufa, Russia

CAMSTech-6069

Investigation of the influence of medium and microwave radiation parameters on the dynamics of decomposition of gas hydrate

M R Davletshina, M V Stolpovsky, A S Chiglintseva and I K Gimaltdinov

Ufa State Petroleum Technological University, Ufa, Russia

CAMSTech-6070

Technologies for methane production from hydrogen using a heated liquid

M R Davletshina, M V Stolpovsky and A S Chiglintseva

Ufa State Petroleum Technological University, Ufa, Russia

CAMSTech-6071

Features of decomposition of gas hydrate when exposed to microwave radiation

M R Davletshina, M V Stolpovsky, A S Chiglintseva and I K Gimaltdinov

Ufa State Petroleum Technological University, Ufa, Russia

Доклады участников


                                

Фотогалерея


Обратная связь