CAMSTech-III 2022, CAMSTech-IV 2024: Advances in Materials, Systems and Technologies

Conference Materials


IV International Conference

CAMSTech-IV 2024: Advances in Materials, Systems and Technologies

Conference Materials

About the Conference


Website

The IV International Conference on Advances in Materials, Earth Science and Technology, (CAMSTech-IV 2024) was organized by the Bukhara Engineering Technological Institute (Uzbekistan). In 2024 the conference took place in Bukhara from October 29 to 31, 2024. The conference was co-organized with the support of the partners, including the Namangan Engineering Technological Institute (Uzbekistan), Osh Technological University named after M. M. Adyshev (Kyrgyzstan), Karaganda Technical University (Kazakhstan), Technological University of Tajikistan (Tajikistan), Management and Science University (Malaysia), ITM University Gwalior (India), and Ankara University (Turkey).

The international scope of the conference was confirmed by the participation of representatives from universities and research centers of several foreign countries, including Uzbekistan, Malaysia, Kazakhstan, Kyrgyzstan, Iraq, Belarus, Vietnam, Russia, and the Czech Republic. More than 350 applications were submitted for participation in the event.

The primary objective of CAMSTech-IV 2024 was to provide an international platform for scientists and specialists from universities, academic institutions, enterprises, and research centers worldwide to share best practices, discuss current challenges, and explore development prospects in materials science, energy, geosciences, cybernetics, mathematics, and related fields. The conference also aimed to address social, economic, and environmental issues associated with sustainable development and the integration of smart technologies in agriculture.

Proceedings of CAMSTech-IV-2024 are published in AIP Conference Proceedings (volume 3390).

Proceedings of CAMSTech-III-2022 are published in AIP Conference Proceedings, vol 3021, indexed in Scopus.

Proceedings of CAMSTech-II-2021 are published in AIP Conference Proceedings - Volume 2467 (indexed in Scopus).

Proceedings of CAMSTech-I-2020 are published in IOP Conference Series: Materials Science and Engineering - Volume 919 (indexed in Scopus).

Conference Programme


Presentations of the participants


Papers and reports


MATERIALS SCIENCE AND APPLIED PHYSICS

  • 020001 The effect of the material type and the surface treatment quality on the adhesion value of adhesive joints S. I. Koryagin, N. L. Velikanov, and O. V. Sharkov
  • 020002 Modeling the operation of a thrust bearing with a support made of antifriction material V. V. Alisin
  • 020003 Effect of anion on magnetoimpedance in thulium manganese chalcogenide A. M. Kharkov, M. N. Sitnikov, and S. S. Aplesnin
  • 020004 The effect of electrolyte concentration on the properties of ITOZnO.R6GPANIITO dye solar cell Hayder Mohammed Ali, Hawraa Hussein Kadhim, Nadia M. Salloomi, and Tariq J. Alwan
  • 020005 Machine learning for analysis and prediction of wear in journal bearings considering experimental data Aleksey Rodichev, Maksim Bondarenko, and Leonid Savin
  • 020006 Features of surface plastic deformation processing for parts manufactured from difficult-to-machine materials Pavel Melnikov, Nikolay Bobrovskij, Renat Kamenov, and Vyacheslav Shuvaev
  • 020007 Laboratory tribotechnical tests of solid-lubricating coatings Methods and equipment Andrey Rachishkin and Denis Gruzdkov
  • 020008 Detection of defects in polymer cellular composite materials using active thermography Alexander Divin, Yuri Zakharov, Dmitry Golovin, Ivan Zakharov, and Victor Zabrovsky
  • 020009 Thermographic analysis of structural defects in polymer composites with honeycomb filler using triangulation Dmitry Golovin, Alexander Divin, Yuri Zakharov, Ivan Zakharov, Alexander Tyurin, and Alexander Samodurov
  • 020010 Study of resistance to abrasive wear of gland seals used in hydraulic systems of quarry hydraulic excavators Nabijon Abduazizov, Akbar Zhuraev, and Sardorjon Turdiev
  • 020011 Air permeability parameters of paper materials Dmitri Baidakov, Lyudmila Komarov, and Marina Kalitina
  • 020012 Mechanical properties of tool steel after hardening in a magnetic field Yuri V. Dolgachev, Viktor N. Pustovoit, and Aleksei S. Pivchenkov
  • 020013 Numerical analysis of bridge bearings deformation behavior Anastasia Bogdanova, Anna Kamenskikh, and Yuriy Nosov
  • 020014 Analysis of technologies for improving steel purity by controlling slag content Nosir Saidmakhamadov, Nozimjon Kholmirzaev, Valida Bekchanova, Furkat Odilov, Bokhodir Karimov, Nuritdin Tadjiev, Vohid Hamroev, Rahimjon Rahmanov, Adkhamov Khusniddin, and Bekzodbek Mukhammadaliev
  • 020015 Efficiency of the gradient-varizon leg of the thermoelectric cooler Oleg Markov
  • 020016 Comparative analysis of wear-resistant coating on carbide end mills using vibrodiagnostic method Doniyor Isaev, Boburjon Khamidov, Azizjon Ataullaev, Jamshid Ravshanov, and Nodirbek Juraev
  • 020017 Preparation of ZnOPVA nanocomposite thin films for ammonia gas sensing Hadi Hassan Mohammed, Hiba S. Rasheed, Israa Akram Abbas, and Tariq J. Alwan
  • 020018 The effect of annealing temperatures on the properties of CdS.AlCu Schottky diode Hussein Ali Salman, Duha Ismail Khalil, and Rushdi I. Jasim
  • 020019 The effect of load and speed on the frictional heat resistance of carbon-carbon composite material Valery Alisin
  • 020020 Assessment of wear resistance based on friction coefficient of a modified radial bearing design considering compressibility Anastasia Opatskikh and Natalya Khamidullina
  • 020021 Criteria for the performance of parts and assessment of their residual life Gayrat K. Ubaydullayev and Sanat R. Shadiev
  • 020022 Investigation of interaction of heat-resistant pipe steel of 15Kh5M with silicon during silification N. V. Lemeshko, A. V. Rubtsov, J. N. Shermatov, S. V. Chertovskikh, and R. M. Tazetdinov
  • 020023 Theoretical aspects of determining the consumption of the working fluid coming out of the annular slotted regulator of resource-efficient sprinklers Kh. D. Irisov, G. S. Xamidov, N. Abdiyev, R. M. Botirov, and M. A. Amanova
  • 020024 Stand for studying the influence of shock wave pressure as an independent factor of ultrasonic cavitation effects V. D. Minakov
  • 020025 Model of the formation of waves on the gas-liquid surface when creating acoustic pressure disturbances in the gas phase A. N. Slivin
  • 020026 Research of the movement of a cotton particle under the influence of external pressure and a scraper for calculation of the tension arising in it Kh. K. Rakhmonov, K. J. Jumaniyozov, R. Kh. Nurboev, and E. S. Kodirov
  • 020027 Researching of aerodynamic indicators of non-hermetic solder in modeling of ventilation networks Elyor Musurmanov
  • 020028 The noise generated in production enterprises and the principles of its elimination and normalization G. F. Keldiyarova, L. N. Samiyev, E. E. Kobilov, R. Abdumuminova, M. G. Boratova, S. I. Ashurmakhmatov, M. Turdoliyev, K. I. Sharifmurodov, X. R. Burxonov, and Q. Abdullayev
  • 020029 Formation of a dynamic boundary layer with temperature-dependent gas viscosity in a methane pyrolysis reactor I. V. Kudinov, K. V. Trubitsyn, E. V. Kotova, V. A. Kudinov, E. V. Kerosirov, and E. V. Dubas
  • 020030 Investigation of ways to start an adjustable electric drive Ziyodulla Eshmurodov and Shukhrat Abdullaev
  • 020031 On the properties of the solutions of a multidimeral system of differential equations in a complex area Turgunoy Djalilova and Murodiljon Xalilov
  • 020032 Algorithm of local vertical constructing in systems with panoramic annular lens Vladimir Solomatin, Dmitriy Otkupman, and Irina Torshina
  • 020033 Obtaining theoretical and analytical results by diagnosing exhaust gases in an internal combustion engine Z. E. Musabekov, J. O. Khakimov, A. A. Ismatov, and H. Z. Uralova
  • 020034 Electrical conductivity of plant tissue N. Eshpulatov, N. Toshmamatov, Z. Samieva, Kh. Agaliyeva, A. Yusupova, and Yu. Khamidov
  • 020035 Bringing life to mathematics through supporting linear algebra and non-euclidean geometries Abdullah Kurudirek and Safarov Tulqin
  • 020036 Investigation of formation of protective layer in zone of welded joint of reaction furnace coil at different siliconization times Ruslan M. Tazetdinov, Jamshed N. Shermatov, Aleksey V. Rubtsov, Nikita V. Lemeshko, Sergei V. Chertovskikh, and Lenara A. Patalova

SMART INDUSTRIAL AND AGRICULTURAL TECHNOLOGIES, SOIL SCIENCES AND MANAGEMENT OF WATER RESOURCES

  • 030001 Internet of things in agriculture Dmitriy Andreev
  • 030002 Optimizing parameters of the seed-removing pipe Davlat Mukhammadiev, Ilhom Ergashev, Lola Zhamolova, and Mirzo Abdusalomov
  • 030003 Effect of trehalose on vegan marshmallow technology Maria Zaikina, Alexander Zaikin, and Svetlana Galchenko
  • 030004 Characterization of spring barley varieties and lines based on adaptive capacity assessment indicators Elena Logvinova, Sergey Krivosheev, Anna Emelyanova, Tatiana Podieelets, and Aleksei Pykhtin
  • 030005 Application of sugar beet image segmentation technology in an optical size control system P. V. Balabanov, A. S. Egorov, A. I. Eliseev, and S. A. Senkevich
  • 030006 Sorghum cultivation on medium saline soils of Uzbekistan Sh. S. Sayfiddinov, Z. J. Ubaydullaev, B. S. Avutkhanov, Sh. A. Khujamov, M. K. Nasimova, and A. I. Tursunov
  • 030007 Impact of mineral fertilizers on crop yield increase and sustainability Alexei Golovin, Danil Zyukin, Elena Bobyreva, Elena Sentishcheva, Anna Chunikhina, and Anna Filippova
  • 030008 Determination of the technological potential of endophytic microbial isolate obtained from aloe vera Alla Krynitskaya, Elena Petukhova, Maria Kharina, Zosya Kanarskaya, and Maria Meshcheriakova
  • 030009 Processing of post-alcohol stillage using Candida Blankii yeast as protein biomass producers Zemfira Yangirova, Rustem Khangildin, Igor Rusakov, and Anastasia Vitsenko
  • 030010 Application of various doses of biohumus obtained by two production methods for potato cultivation on leached chernozem Alexander Saulko, Alena Ozheredova, Olga Zvereva, Arina Kotova, and Sergey Sigida
  • 030011 Development of recommendations for improving worker safety based on a risk-oriented approach: A case study of a water supply and sewerage enterprise Vitaly Kudinov, Sergey Panov, Tatyana Kaverzneva, Olga Gorbunova, and Dmitry Tsimberov
  • 030012 Theoretical basics of interaction of vibrating plate with mineral fertilizer particles Sayakhat Nukeshev, Khozhakeldi Tanbayev, and Zhazira Zhazykbayeva
  • 030013 Yield and grain quality of winter wheat under the influence of crop rotation and mineral fertilizers Tatyana Dudkina, Vyacheslav Lukyanov, and Sergey Boev
  • 030014 Optimization of soil tillage systems: Evaluating the efficacy of the Dracon cultivator Elena V. Bobyreva, Tatyana N. Bukreeva, Alexey A. Golovin, Marina N. Ignatova, and Anastasya Sokolov
  • 030015 The influence of bioactive substances on some physiological properties and productivity of Phaseolus vulgaris L. Maftuna Nasimova, Akmal Sanakulov, and Zarifa Abdusalomova
  • 030016 Determination of mass-conducting characteristics of waste plant raw materials to optimize their processing technologies Ruslan Safin, Albina Safina, Rushaniya Taktamysheva, and Alexandra Orekhovskaya
  • 030017 Improving the efficiency of regression decision trees by applying the differential evolution method Sergei Mitrofanov and Tatiana Karaseva
  • 030018 On the justification of the design of a wood chipper for grinding sawmill waste using saw blades as the cutting working element A. V. Knyazev, N. A. Borodin, V. V. Tkachev, R. G. Borovikov, S. V. Malyukov, and I. N. Zhuravlev
  • 030019 Method of washing with liquid in the process of acetylene production Olim Sattarov and Maruf Nematov
  • 030020 Obtaining calcium, magnesium chlorate defoliant based on local dolomite mineral Giyos Tohirov, Farhod Umirov, and Gulmira Nomozova
  • 030021 Study and analysis of horizontal technological schemes of development and ventilation of ore mines Azamat Makhmudov and Soyibjon Akhmedov
  • 030022 Development of a planar geometric model of the rotary plow with double-sided acting moldboard Tojiddin Juraev, Shavkat Imomov, Tulkin Abdukarimov, Zarina Khaydarova, Ekaterina Intankina, Tekeste Mehari, and Yuli Panca
  • 030023 Calcium feed phosphates derived from wet process phosphoric acid of Kyzylkum origin and calcium-bearing raw materials Ilkhomjon Khoshimov, Shakhzoda Turdialieva, Bekhzod Karshiev, Shukhratjon Nomozov, Shafaat Namazov, Atanazar Seytnazarov, and Mohamed Rifky
  • 030024 The use of artificial intelligence for agricultural development Dmitriy Andreev
  • 030025 Measurement of water-air mixing in a centrifugal pump used in irrigation systems Yakub Chulliyev, Baxadir Baltabayev, Mashrab Abdullayev, and Bogibek Urinov
  • 030026 Influence of angle attack of the spherical disc skim-coulter and forward speed of the unit on soil throw distance Abdukayum Normirzaev and Islam Ruziev
  • 030027 Evaluation of velocity distribution in earthen irrigation canals Maqsud Otakhonov, Dilbar Abduraimova, Davron Allayorov, and Ilkhomjon Zokirov
  • 030028 Substantiation of the parameters of the device disc furrow opener for local laying organic fertilizers Abdirasuli A. Ibragimov, Abdukarim A. Abdurakhmanov, Pulat A. Uteniyazov, Baxtiyar B. Ramazanov, and Baxit N. Ramazanov
  • 030029 Optimized upper disk plow design for efficient cotton field cultivation Farmon Mamatov, Maxmatmurod Shomirzaev, Sherzod Kurbanov, Samar Ochilov, and Mokhichekhra Begimkulova
  • 030030 Studying the influence of seedling thickness, growth, development and productivity in drip irrigation of cotton under the film Tolib Karimov, Zubayda Isokova, and Bobamurod Khatamov
  • 030031 Improved two-track harrow parameters impact on performance metrics for planted cotton seeds sustainable growth E. S. Kurbonov, A. A. Ungarov, D. H. Yuldasheva, and I. R. Makhmudov
  • 030032 Justification of parameters of mower windrower for sesame harvesting Sh. Ravshanov, A. Bozorboev, N. T. Umirov, B. Q. Tulaganov, A. A. Isakov, and G. G. Egamnazarov
  • 030033 Optimizing drawbar pull resistance in a grape row machine with integrated fertilizer and subsoiling functions N. Komilov, Sh. Abduganiyev, S. Imomnazarov, and F. Rakhimqulov
  • 030034 Comparative characteristics of the ability to produce hydrolytic enzymes by natural and mutant strains of microorganisms A. M. Tremasova, Rin S. Mukhammadiev, R. R. Musin, Rish S. Mukhammadiev, I. M. Ganiev, E. R. Safarova, and E. Yu. Tarasova
  • 030035 Productivity of winter wheat and reseeding of oilseeds and soil fertility in Southern Uzbekistan K. M. Tadjiev, M. Tadjiev, and Sh. Ch. Tursunov

EARTH SCIENCE, MINING AND NATURAL RESOURCES MANAGEMENT

  • 040001 Application of internal protective coatings on tubing: a measure to prevent gypsum salt deposits formation Denis V. Berkov, Aleksandr P. Amosov, Pavel E. Yudin, and Aleksandr G. Verevkin
  • 040002 Model of porosity formation of limestone foundations in the zone of variable groundwater level Sergey Kolmogorov, Nikolay Miklashevsky, Svetlana Kolmogorova, Vera Khudiakova, Nadezhda Matyusheva, Alexey Khudyakov, and Liliya Iksanova
  • 040003 Comparative hydrogeochemical assessment of groundwater in rural settlements with different types of anthropogenic loads Victoria Budarina, Fedor Lisetskii, Olga Marinina, and Lihua Huang
  • 040004 Technogenic impact on groundwater during the development of iron ore deposits Svetlana Starykh, Irina Minakova, Natalia Derkach, Evgeny Masalov, Tatiana Levina, and Denis Ermolaev
  • 040005 Characterization of dust deposits on PV module surfaces in West Africa: The case of Mali Mamadou Tamboura, Ekaterina Gosteva, Maxim Chichkov, Konstantin Shcherbakov, Adama Tolofoudye, and Souleymane Dambe
  • 040006 Coal dust control in the cities with coal seaports: A comparative study of two Russian municipalities Elena S. Kuznetsova
  • 040007 Developing the dispatch control and automation stage for the demineralization of water in the nitric acid production process Olim Sattarov, Sanjar Boybutayev, Abduaziz Kholov, and Ahad Turdiyev
  • 040008 Ways and methods of increasing the efficiency of compressor stations in oil and gas processes Alexander Erushonkov and Aydar Minibaev
  • 040009 The application of UAVs in the mining industry: Innovative solutions for enhancing efficiency, safety, and sustainable development I. V. Kovalev, A. A. Grace, N. T. Kulmurodova, D. I. Kovalev, Z. S. Kulmurodov, and Y. B. Kadirov
  • 040010 Improving the design of transition stiffness sections using bottomless boxes Zulfiya Fazilova
  • 040011 Experimental study of the expansion of vermiculite modified with sodium ions A. R. Aripov, F. I. Sayfullayev, Sh. Sh. Khuzhaev, and M. N. Kurbonov
  • 040012 Methodology for assessing the impact of environmental indicators on the financial results of an oil and gas company Gulnara Nizamova and Marina Gayfullina
  • 040013 Methodical approach to risk assessment of technological solutions in petrochemical industry Marina Gayfullina and Gulnara Nizamova
  • 040014 Centrifugal pump perfomance study Sergey Laponov and Margarita Kviring
  • 040015 Design analysis equipment and technologies for natural gas dehydration Alexander Erushonkov, Sergey Laponov, Margarita Kviring, and Aydar Minibaev
  • 040016 Methodology for assessing the ecological state of the environment with the participation of a motor vehicle complex Iroda Sirojiddinova, Aziz Ernazarov, Oqila Alijonova, Nargiza Todjiboeva, Sardor Ulkanov, Shoyadbek Turaev, and Saida Ulkanova
  • 040017 Innovative applications of composite materials in transport infrastructure maintenance and rehabilitation Zulfiya Fazilova
  • 040018 Water permeability of silicatized sandy loams in the conditions of yamal-nenets autonomous okrug (YNAO) Denis Razuvaev, Alexey Lanis, and Mikhail Chakhlov
  • 040019 Negative impact of transport on urban ecology and mitigation measures Botir Ibragimov, Shavkat Giyasov, and Ibragim Tursunov
  • 040020 Environmental consciousness in sustainable development processes Alina Gallyamova, Larisa Muslimova, Gulnaz Sirgalina, and Anna Guseva
  • 040021 Ensuring safety during work for the reconstruction of buildings and structures Vera Khudiakova, Nadezhda Matyusheva, Aslan Lechiev, Svetlana Murtazina, Linar Sabitov, and Ilgam Kiyamov
  • 040022 Characteristics of impact impulse perception by a monolayer of continuous carbon fiber-reinforced filaments after modification with ultrasonic vibrations and microwave electromagnetic field I. V. Zlobina and N. V. Bekrenev
  • 040023 Assessment of the impact of water transport systems on the state of the natural environment Marina Treyman
  • 040024 A study of solar panel recycling through bibliometric analysis from the Scopus database published in English for the period of 1997–2023 J. Zaynalov and S. Alieva
  • 040025 Aspects of fire risk assessment, analysis and management Irek Bakirov, Liliya Zaripova, and Fanil Khafizov
  • 040026 Using trees on the sides of roads at Mosul University as biological indicators of environmental pollution Khalid Hashem Abd, Ali Farouq Al-Maathedi, and Muhammad Younis Al-Allaf
  • 040027 Geological and statistical processing of logging data Denis Vasilyev and Inna Ozden
  • 040028 Analysis of integral characteristics of active conical fluid film bearings with adjustable clearance Yu. Kazakov, D. Shutin, M. Bondarenko, and L. Savin
  • 040029 Development of a neural network for controlling the pyrolysis of dichloroethane Anastasiya Nikolaeva and Elena Muravyova
  • 040030 Development of a fire safety identification system in places with a large number of people Andrey Pimenov and Ekaterina Kulakova
  • 040031 Absorption cleaning methods for oily smoke gases: Performance evaluation and optimization S. A. Boyturayev, G. Kodirova, and G. Ismailova
  • 040032 Digitalization and sustainable human resource management Alina Gallyamova, Guzel Iskhakova, Anna Guseva, Ekaterina Esakova, and Yulia Pavlova
  • 040033 Analysis of the monotonic instability of a trivial solution of a system of three second-order differential equations Vladislav Lyubimov
  • 040034 Mathematical modeling in ecological research Nikolay Barbashov, Anastasia Polyantseva, Roman Meysner, and Ella Naumova
  • 040035 Review of generator set market development within the framework of the government's environmental programs Inna Malinovskaya

INNOVATIVE TECHNOLOGIES AND SYSTEMS FOR SUSTAINABLE AND EFFICIENT TRANSPORT AND LOGISTICS

  • 050001 The efficiency of using a gas-diesel power plant in vehicles Grigory Nesterenko, Irina Nesterenko, Andrey Karnaukhov, Aleksandr Ivanov, Galia Kokieva, Stanislav Akhmetshin, and Vladimir Zyryanov
  • 050002 Improving the organization of traffic flows in the city Vladimir Sivakov, Igor Adamovich, Kristina Borovaya, Andrey Karnaukhov, Sergey Voinash, Vladimir Zyryanov, and Ramil Zagidullin
  • 050003 The prospects for the development of transport logistics in the international trade Irina Kovaleva
  • 050004 Optimization of the parameters of the functioning of public passenger transport stops Aziz Ernazarov, Ilhom Nasirov, Murod Haydarov, Murodali Nurdinov, Mamurjon Sobirov, and Sardor Ulkanov
  • 050005 Representing consistency indicators identified under laboratory conditions stabilized loess soils in the construction of automobile roads Rashidbek Hudaykulov, Dilshod Aralov, Alaibek Kurbanbaev, and Nurbek Osmonkanov
  • 050006 Human capital management in a transport company: A functional approach Galina Gagarinskaya, Arkady Kremnev, Tatiana Tarasova, Olga Tvanchina, and Olga Tarasova
  • 050007 Automated information system for forecasting and accounting of spare parts consumption during rolling stock maintenance G. G. Kiselev, A. L. Zolkin, E. V. Dudukalov, F. R. Akhmadullin, and A. S. Bityutskiy
  • 050008 Improving traffic safety at one-line intersections of city streets Aslidin Urokov, Barno Salimova, Dilfuza Makhmudova, Feruza Ikramova, and Khurshid Durdiyev
  • 050009 Energy recovery device for agricultural machinery Nikolay Barbashov, Anastasia Polyantseva, Roman Meysner, and Ella Naumova
  • 050010 Wireless truck load detection system V. V. Romanov, O. A. Maykov, I. E. Burlakov, E. A. Kokhonkova, and A. N. Fomin
  • 050011 Improvement of service machine maintenance Vladimir Sivakov, Sergey Gryadunov, Andrian Ustinov, Aleksandr Andronov, Viktoriia Sokolova, Stanislav Akhmetshin, and Adel Yakushev
  • 050012 Hydrogen fuel hybrid train concept for passenger transportation Kirill Domanov, Zakhar Shchetkin, and Stanislav Istomin
  • 050013 Construction of a safety model of the braking system of passenger cars Pavel Solonshchikov and Evgeniy Kosolapov
  • 050014 Effects of adding hydrogen to the gasoline-air mixture on engine and vehicle dynamics Ikhtiyor Askarov, Ravshanbek Dadaboyev, Sharof Karshiboyev, Shoira Khoshimova, Ilhom Umirov, Zarnigor Sokhibova, Sarvar Yusupov, and Gulnoza Babayeva
  • 050015 Ensuring reliability of car engines operating in hot climatic conditions Nazirzhon Karimkhodzhaev, Abdupatto Abdullayev, and Ilkhomjon Kosimov
  • 050016 Evaluation of the performance quality of satellite navigation systems based on the results of measurements on railway locomotive Vladislav Demyanov, Maxim Skorobogatov, Denis Loginov, and Artem Plotnikov
  • 050017 Research of a method for analysing traffic flow changes based on Circos model Nikolai N. Maiorov and Daria V. Kudryaeva
  • 050018 Classification of rail line conditions using pattern recognition principles Evgeniy Tarasov, Snezhana Nadezhkina, and Ilya Bredun
  • 050019 Determining the structure of a railway tourist product based on individual consumer preference Oksana Bondarenko and Natalia Mukovnina
  • 050020 Consideration of vibration in the construction of a digital twin for the wheel-motor unit of the 3ES5K electric locomotive Aleksandr Portnoj, Oleg Melnichenko, Aleksej Linkov, Sergej Shramko, and Pavel Grigorenko
  • 050021 Modeling the trajectory of wind-sand flow over a highway Saidburkhan Djabbarov, Khurshid Abdullaev, and Saulet Shayakhmetov
  • 050022 Means of increasing the efficiency of automatic locomotive signaling systems on sections of the Eastern polygon Andrey Pultyakov, Maksim Skorobogatov, and Vladislav Demyanov
  • 050023 Modeling of passenger departure numbers based on individual choice models Daniil Plotnikov and Alexander Martynenko
  • 050024 Analysis of the impact of inland water passenger transport infrastructure on the development of small towns Diana Boboshko, Irina Varzina, Maxim Konyakhin, and Antonina Kulapova
  • 050025 Analysis of the economic efficiency of integrating artificial intelligence and big data into logistics Ayan Malikov, Agil Magerramov, Maira Kidassova, and Irina Bukhtueva
  • 050026 Verification of the urban public transport for the permissible number of transfers Ivan Gajsin and Alexander Martynenko
  • 050027 Information components in the analysis of road traffic accidents in the suburban area Elena Pechatnova, Ivan Kirushin, and Evgeniy Miroshnikov
  • 050028 Using adaptive chassis principles in developing forestry harvesting machines Roman Dobretsov, Yunfeng Shen, Aleksandr Ivanov, Rushaniya Taktamysheva, Alexandra Orekhovskaya, Viktoriia Sokolova, and Maria Taraban
  • 050029 Modeling road subgrade compaction technologies in saline soils using Plaxis 3D software Rashidbek Hudaykulov, Barno Salimova, Dilshod Aralov, and Masrur Ibroximov
  • 050030 Self-regulation of drivers activity as a factor of driving reliability Sviatlana Andryewskaja and Olga Izvekova
  • 050031 Resource-saving in Russia's transport and logistics system: Adaptation to economic transformation Elena Bolgova, Sergey Bolgov, and Marina Kurnikova
  • 050032 Assessment of community noise reduction of light propeller-driven aircraft due to the use of turboprop and electric engines as part of the power plant Petr Moshkov
  • 050033 Mathematical modeling of garland micro hydro power plant working blades A. Bokiev, S. Sultonov, N. Eshpulatov, N. Nuralieva, and I. Zoxidov
  • 050034 Green transport as a way to make cities more sustainable G. R. Mavlyautdinova, L. M. Gabsalikhova, E. M. Mukhametdinov, F. E. Nishonov, Z. T. Munavvarxonov, and S. Imomnazarov
  • 050035 Data transmission in train traffic control: The role of network infrastructure V. A. Nadezhkin, S. A. Nadezhkina, A. N. Fomichev, S. V. Dusheiko, A. L. Zolkin, and A. S. Bityutskiy
  • 050036 Combined method for collision prevention of mining machines and personnel in mine conditions V. V. Romanov, E. A. Kokhonkova, I. E. Burlakov, and D. S. Kudinov

CYBERNETICS, AI, AND MACHINE LEARNING FOR INTELLIGENT CONTROL SYSTEMS AND SUSTAINABLE DEVELOPMENT

  • 060001 Game equipment theory for solving inventive problems for solving organizational and business problems: Methodological support Stanislav Gorobchenko, Artur Khabibullin, Aidar Nurullin, Olga Polyanskaya, Sergey Meshkov, and Maryam Mirzoeva
  • 060002 AI chat bots in early childhood education: Enhancing learning Gulshod Yunusova, Akmal Gaffarov, Khurshidbek Khamraev, Nargiza Zokirova, Shaxlo Abdullayeva, Bekzod Nurmatov, and Jasurbek Ergashev
  • 060003 Dynamic multi-level cooperative coevolution framework for solving large-scale global optimization problems Aleksei Vakhnin and Evgenii Sopov
  • 060004 Automated information system for analyzing data on exercise effectiveness of a computer training complex Pavel S. Ryabov and Ivan S. Polevshchikov
  • 060005 Evaluation of AI-enhanced VRAR in mechanical engineering education Gulchekhra Khamraeva, Sevara Hamidova, Uktam Abdinazarov, and Gulruxsor Kabulova
  • 060006 AI-driven career path recommendations transforming mechanical engineering education Mavlyuda Gadoeva, Umida Usmonova, Madina Madieva, and Nargiza Klicheva
  • 060007 The concept of an automated workplace for monitoring territories and intelligent control of unmanned aerial vehicles Yu. G. Emelyanova, V. P. Fralenko, V. M. Khachumov, M. V. Khachumov, and O. G. Shishkin
  • 060008 Using high-order cumulants to recognize digital types of radio signal modulation V. K. Kurbanaliev, A. O. Slavyansky, A. E. Latyshev, and E. R. Zhdanov
  • 060009 Application of a modified 0-1 test algorithm for the analysis of chaotic modes in a fractional Duffing oscillator Roman Parovik
  • 060010 Object recognition on radar maps of FMCW radars using three-input convolutional neural networks Xinyu Wu, Vladimir Kuptsov, and Sergei Ivanov
  • 060011 Security implications of using LLM in software development Vitaly Shulman, Denys Sidorov, Evgenii Mozharovskii, Ilia Kuznetcov, and Anar Israfilov
  • 060012 Genetic improvement of mQSO algorithm for dynamic optimization using PushGP Vladimir Stanovov and Eugene Semenkin
  • 060013 Computer vision and machine learning methods for digital restoration Amelia Grace, Igor Kovalev, Anna Voroshilova, Yorkin Kadirov, and Kirill Lukyanov
  • 060014 Distributed selective training of autoencoders Svetlana Fomicheva and Georgy Zhemelev
  • 060015 Integration of machine learning models in applications for improving text processing Dmitrii Pshichenko, Aleksei Dudak, Evgenii Mozharovskii, and Aleksandr Smirnov
  • 060016 Application of artificial neural networks for transforming a photograph into a painting Veronika Bronskaya, Denis Balzamov, Dmitriy Bashkirov, Maria Kondrateva, Anatolii Shipin, Andrey Goryachev, Ksenia Bronskaya, and Tatiana Ignashina
  • 060017 Implementation of an event prediction module for the educational process using a neural network classification model Mikhail Dorrer
  • 060018 Artificial intelligence technologies to improve the quality of staff training in maritime industry Natalia Levchenko, Nelly Sedova, Gulsara Kuldysheva, Tatiana Gorbunova, Elena Alutina, Irina Ledovskikh, and Ruslan Bazhenov
  • 060019 Application of elliptic Jacobi functions to approximation of moments of inertia and to optimization of angular velocities in UAV control systems Anastasia Volkova and Vladimir Taran
  • 060020 Ensuring the security of wireless networks using neural networks D. A. Trukhanov and A. G. Afanasenko
  • 060021 Comparative analysis of bagging implementation in time series procession D. Petrusevich
  • 060022 Formation of a feature system and analysis of their informativeness Evgeny Tarasov and Snezhana Nadezhkina
  • 060023 Parametric synthesis of a trainable state classifier Anna Tarasova and Vadim Nadezhkin
  • 060024 Soft island model of the tent-map-based fish school search algorithm with exponential step decay Liliya A. Demidova and Vladimir E. Zhuravlev
  • 060025 Artificial intelligence in the information support system of processes for modern industrial enterprise Sergey Bobrovskiy and Elena Malysheva
  • 060026 Optimizing neural network loss function with differential evolution Eduard Morozov, Vladimir Stanovov, and Sergey Gorbunov
  • 060027 On cascaded code division of channels Alexey Rabin and Sergey Rabin
  • 060028 New approach to implementation of quantum-inspired genetic algorithm for numerical optimization based on high-dimensional quantum states Liliya Demidova and Vladimir Maslennikov
  • 060029 Encoding and decoding devices design for code division of channels Alexey Rabin, Andrey Ovchinnikov, and Sergey Rabin
  • 060030 Control mechanism for the rotational support system of an antenna Azizjon Ataullaev, Odil Ataullaev, Nodirbek Juraev, and Doniyor Isaev
  • 060031 Evaluating tuning methods for position loop gain in servo motor control: Performance and stability analysis Nazokat Karimova, Ulugbek Ochilov, and Ilkhom Egamberdiev
  • 060032 Modeling and practical implementation of ultrasonic intensification for the removal of harmful impurities from the atmosphere to solve the problem of warming in the Arctic and subarctic climate R. N. Golykh, A. R. Barsukov, J.-B. Carrat, V. D. Minakov, and I. A. Manyakhin
  • 060033 Systematization and data analysis in the design of special clothing for spinners Nigora Gafurova and Malika Khujayeva
  • 060034 Dynamics of architectural, urban planning and technological development of buildings and structures, urban areas under reconstruction Timur Radionov, Linar Sabitov, Zarema Nagaeva, Hafizullah Benai, Vladimir Efimov, Leisan Kiyamova, and Sergey Voinash
  • 060035 The monotonic stability of the implicit differential equations system solution on an infinite interval Vladislav Lyubimov
  • 060036 Fundamental technological principles of using ozone in water purification processes Palvan Kalandarov, Aidar Kuttybayev, Shyngys Zhalunnur, Laila Sagatova, Assem Yerzhan, and Nadira Tulepbek

DIGITAL TRANSFORMATIONS IN SCIENCE AND EDUCATION: NEW TRENDS AND TECHNOLOGIES

  • 070001 Principles of accounting enterprise technological data in the production of new types of products Alexey Govorkov, Evgeniy Remshev, Avenir Volynin, Grigory Afimin, Liliya Iksanova, Adel Yakushev, and Svetlana Alekseeva
  • 070002 Methodological design of a composite toolkit for diagnostics and quantitative measurement of smart-cross sales elasticity Li Jun, Wang Xianpeng, Gordey Gusakov, Michael Zhudro, Vladimir Zhudro, and M. K. Zhudro
  • 070003 Methodology for asking control questions and its application for developing a questionnaire for marketing audit of an educational institution Stanislav Gorobchenko, Sergey Meshkov, Klara Karamova, Venera Yumagulova, Natalia Melamed, and Maria Taraban
  • 070004 Improving creative research skills of students through ergonomic analysis of women’s outerwear in conditions of industry transformation Zebo Tokhtayeva, Barnogul Rahmatova, and Bahriniso Turakulova
  • 070005 Building design competence in students through modeling women’s clothing Zebo Tukhtayeva, Saodat Asrorova, Bakhriniso Turakulova, and Sayyara Mamatova
  • 070006 Transformation of the fashion industry in the context of digitalization Nuriya Ibragimova, Vener Kharisov, and Guzel Sunaeva
  • 070007 Virtual and digital models of development of production business processes of industrial enterprises Aleksandr Zhukov, Svetlana Ponomareva, Suren Khachaturyan, and Igor Kartsan
  • 070008 Educating for a sustainable future: The role of environmental awareness in early education Kun Liu, Sihao Wang, Yijie Ying, and Chengjiao Gong
  • 070009 Dynamic coupling analysis of sustainable development of regional education Yimeng Zhu, Zhijian Wang, Huiqing Zhang, Abdul Rahman S. Senathirajah, and Pengfei Zhang
  • 070010 Investigating the impact of circular economy practices on the sustainability and growth of small and medium enterprises Jianxia Li, Ting Su, Yuhan Zhao, and Xinwei Lv
  • 070011 Foreign experience of using big data analysis technology in activity of customs administrations Sergey Novikov, Yuriy Somov, Nikolay Kozhukhanov, and Polina Efanova
  • 070012 Research on the construction of sustainable development evaluation index system for teaching innovation management in vocational education universities Wenyuan Han, Qianqian Zhang, Jiaxin Li, and Rongyan Tang
  • 070013 Research on sustainable development strategies of industry-education integration in contemporary vocational education Yang Huang, Xinming Cai, Liwei Deng, Oksana Vocodko, and Wenyuan Han
  • 070014 Enhancing student support and career guidance through digital educational ecosystems A. A. Sazonov
  • 070015 Impact of digital transformation on educational corruption and cheating: USA and high-corruption countries Dinara Erkenkizi
  • 070016 Current trends in technologies for creating infographics in education Margubakhon Eshnazarova, Nodira Begmatova, Zulayxo Marasulova, Maqsadjon Ibroximov, and Nargiza Turdaliyeva
  • 070017 Digital information technologies and the use of computer programs in STEAM education Gulshod Yunusova, Kasim Khusanov, Shaxlo Abdullayeva, Nargiza Zokirova, Zarifa Satimboyeva, Muyassar Hojiyeva, and Shaxzoda Tursunova
  • 070018 Digital transformation of the regional education system for sustainable development Alexander Olifirov, Nikolay Oleinikov, Krystina Makoveichuk, and Nikita Potapovich
  • 070019 Development of scientific and methodological support for the commercialization of intellectual activity in research universities Andrey Sazonov
  • 070020 Technology-driven educational transformation in language teaching Maria V. Arkhipova, Elena V. Zhulina, Elena A. Karpova, Marina P. Petrukhina, and Anastasia A. Vasilyeva
  • 070021 The prospects of using software learning tools in the process of teaching theoretical mechanics Siddiq Qahhorov and Manzura Bekmurodova
  • 070022 AI-powered grammar enhancement: Digital technologies for EFL language learning Anastasia Yu. Ryakhovskaya, Elena D. Selifonova, Ekaterina S. Khrabrova, Inna I. Ikatova, and Svetlana A. Chugunova
  • 070023 Technology-enhanced creativity in education Maria V. Arkhipova, Olga V. Telegina, Oksana R. Zhernovaya, Elena V. Zhulina, and Alyona S. Vasenina
  • 070024 Audit analysis of basic indicators for calculation of income tax Dildora Pashakhodjaeva and Sergey Yekimov
  • 070025 The role and importance of barcoding and QR coding in the field of products and operations Anvar Togaev and Abdulaziz Shermukhamedov
  • 070026 Institutional aspect of state regulation of digital business transformation in Russia Gulnara Shaykhutdinova, Ella Gaynullina, Radmir Bayburin, and Emiliya Shaykhutdinova
  • 070027 On the issue of application of the strategic planning model in technological development of oilfield services Timofey Beloshitsky and Vera Biryukova
  • 070028 Strategic corporate forecasting tools Victor Prokhorov, Ivan Rozhnov, Anna Kuklina, and Olga Maslova
  • 070029 Building a collaborative environment as a means of organizing productive work for educators Gulnora Kazimova, Gulandom Yunusova, Dilfuza Narzullayeva, and Nasiba Ibodova
  • 070030 Improving the methodological approach to evaluating the effectiveness of an oil company Lilia Daminova and Mamduda Khalikova
  • 070031 Distribution of business process management functions in the implementation of industrial projects Kirill Bychkov and Mariya Shkaley
  • 070032 The introduction of information modeling technologies in construction to achieve technological sovereignty Aleksandr Kolomiets, Andrey Kolesnikov, Sergey Golubev, Dilara Musina, and Zemfira Gareeva
  • 070033 Research on the informativeness of patterns and formation of a working set of features using a metric function Anna Tarasova, Ilya Bredun, and Vadim Nadezhkin
  • 070034 Digital transformation of business: Foreign experience on the example of the USA Gulnara Shaykhutdinova, Ella Gaynullina, Radmir Bayburin, and Emiliya Shaykhutdinova

ENERGY, CHEMICAL TECHNOLOGIES AND ECOLOGICAL ENGINEERING

  • 080001 Development and research of wireless control of in-pipe robotic complex Andrey Zatonskiy, Dmitry Kuchev, Gulsara Kuldysheva, Tatiana Gorbunova, Elena Alutina, Irina Ledovskikh, and Ruslan Bazhenov
  • 080002 Reliable measures of distribution shapes for Burr XII Vitaly Polosin
  • 080003 Vertical greenery in civil engineering: Global and regional experience Lubov Yao, Juliana Emanova, Mikhail Yao, and Klara Karamova
  • 080004 Optimization based on quality indicators in laser decorative work on clothing Malika E. Khujaeva and Nigora T. Gafurova
  • 080005 Features of the information security subsystem of a critical information infrastructure facility in the information support system Sergey Skorokhodov, Sergey Bobrovskiy, and Alexandr Mosolov
  • 080006 Scientific methods of technological cleaning of municipal wastewater Cholpanoy Kuchkarova, Nilufarkhan Kabulova, and Mukhtorjon Khodjakulov
  • 080007 Use of YOLOv8 architecture for identification of lactic acid-producing strains Anna Alekhina, Alexander Proskurin, Semyon Polyetykin, Anna Sukhanova, and Sergey Syrcov
  • 080008 Improving the quality of the rural living environment through the introduction of modular construction technologies Artem Subbotin, Mikhail Birzhivoy, Vladislav Bykadorov, and Ajgul Kalimullina
  • 080009 The impact of noise on the quality of the second-order curve recognition by random sample consensus algorithm Ilya Osokin, Ilya Ryakin, Grigory Yaremenko, Sina Moghimi, Sergei Davidenko, Vladimir Guneavoy, Mikhail Patrikeev, and Pavel Osinenko
  • 080010 Agricultural technologies and the transformation of ethical paradigms Victor Gordilov, Kapitolina Kapustina, and Roman Kapustin
  • 080011 Obtaining high-quality foundry products from low-alloy steel alloys Nosir Saidmakhamadov, Nodir Turakhodjaev, Sarvar Tursunbaev, Nozimjon Kholmirzaev, Botir Saydumarov, Jamshidbek Khasanov, Bokhodir Karimov, and Murodilla Gaybullaev
  • 080012 Energy separation in a Ranque-Hilsch tube by varying the number of nozzles T. A. Yenutina, L. V. Kulagina, T. A. Kulagina, M. M. Gafurov, and S. A. Gilek
  • 080013 Analytical review of the market of the renewable energy sources Irina Burenina and Polina Prokofieva
  • 080014 A mathematical model for calculating the expiration time of detonation products using the developed face Shadiboy Hakimov, Otabek Giazov, Shukhrat Tadjiev, Olimjon Kobilov, and Umidjon Yermekboyev
  • 080015 Development of innovation management methods in the petrochemical industry Zemfira Gareeva, Dilara Musina, Irina Soloveva, Larisa Avdeeva, and Nikita Yarullin
  • 080016 Dynamic model of operation of measuring equipment with metrological support D. S. Ershov, A. V. Malahov, R. Z. Khayrullin, and I. R. Solokhov
  • 080017 Impact of sustainability factors on oil refinery processes Elvira Ibragimova and Dmitriy Kotov
  • 080018 Hexagonal solutions in architectural planning structures for residential development Vladimir Mavzovin, Nikolay Klevanskiy, Svetlana Alekseeva, Ramil Zagidullin, Ivan Bannikov, and Maria Chernetskaya
  • 080019 Enhancing efficiency of processes in timber industry enterprises through effective resource management Sergey Medvedev and Pavel Dudin
  • 080020 Experimental determination of the pasteurization properties of pomegranate juice under the influence of ultra-high frequency electromagnetic field energy Akmal Uzaydullayev, Nusratilla Barakayev, Alisher Rajabov, and Sardor Kuzibekov
  • 080021 Graphical analysis of subfamily shapes of the generalized heavy-tailed beta distribution Vitaly Polosin
  • 080022 Human resources management strategy as a key element of the company sustainable development Sofia Sayfullina and Irina Burenina
  • 080023 Improvement of quality and nutritional value of floury products using powders of medicinal plant raw materials Zebiniso Ashurova, Kakhramon Rakhmonov, Nargiza Majidova, Nargiza Sabirova, and Kakhramon Madjidov
  • 080024 Optimal pricing and taxation: Theoretical insights and practical applications Eldar Manashirov
  • 080025 Analysis of energy materials, economy and environment coupling of green buildings Leilong Ma, Yulin Qin, Xianpeng Wang, Jun Li, and S. N. Leonovich
  • 080026 Wear prediction of ball mill liners using DEM-based models Akmal Jumanazarov, Ulugbek Ochilov, and Ilkhom Egamberdiev
  • 080027 Methodological foundations of work on an architectural object as a source of inspiration in the artistic design of a modern costume Yulia Firsova, Gulnar Sibagatova, and Svetlana Kenzhegaliyeva
  • 080028 Specific aspects of improving the efficiency of secondary wood resources management Sergey Medvedev and Mikhail Zyryanov
  • 080029 Bibliometric analysis of global research output in grape berry thinning and grape bagging from 2012 to 2021 F. Boytorayeva, A. Elmurodov, S. Karimova, Z. Izbasarova, and I. Normuratov
  • 080030 Ensuring economic security of electric power enterprises: A risk-oriented approach Tatiana Tarasova
  • 080031 Analysis of the dendritic objects structuring Yuliya Ryzhikova and Sergey Ryzhikov
  • 080032 Flexural-torsional flutter of an aircraft wing with distributed parameters in subsonic flight mode I. I. Safarov, A. U. Yavov, Z. I. Boltaev, X. E. Ergashev, and U. U. Rajabov
  • 080033 Development of conditioned and unconditioned crossed areas at the Jeroy-Sardara field Umidjon Yermekboyev, Aziz Nematov, and Sarvinoz Pardaeva
  • 080034 Integration and adaptation of ESG factors in corporate activities Leila Abdullina, Inna Uliankina, and Artur Gazizyanov
  • 080035 Diagnostic indicators of batteries in systems for monitoring the technical condition of traction substations Vladislav Nezevak, Ivan Kremlev, and Elena Bakanova
  • 080036 Modernization of the mill of the riching plant Svetlana Starykh, Anton Okorokov, Anton Rastorguev, Maxim Taranenko, and Denis Ermolaev
  • 080037 Reverse engineering of centrifugal pump parts for production needs Natalia Derkach, Irina Minakova, Olga Solodukhina, Anton Kazantsev, and Tatyana Kazantseva
  • 080038 Development of a neural network to optimize chlorine production by the diaphragm method Stanislav Emelyanov and Elena Muravyova
  • 080039 Qualitative properties of a biparabolic model of heat transfer V. I. Korzyuk and J. V. Rudzko
  • 080040 Innovative approaches to optimize agricultural transportation: Sustainable solutions for ecological challenges A. A. Abdullaev, N. M. Normetova, B. I. Islomov, and B. Z. Usmonov
  • 080041 Growth of shade varieties, development and yield of planting methods and the effects of norms Ilnur Abitov
  • 080042 Modeling and optimization of mobile robot behavior considering uncertainty factors A. B. Migranov
  • 080043 Investigation of the process of slurry formation at the well bottom hole Rustam Djurayev, Otabek Elmurodov, and Dilshoda Khatamova
  • 080044 Filtration flow from the injection well to the production well during the selective leaching of uranium Jamoliddin Bobonazarov, Umurbek Qushmurodov, and Sunnatillo Ikromov
  • 080045 Assessment of bioenergy efficiency of the developed unit for preparation of liquid fodder mixtures Pavel Solonshickov, Irina Tolstoukhova, and Artem Shevchenko

III International Conference

CAMSTech-III 2022: Advances in Materials, Systems and Technologies

Conference Materials


About the Conference


Website of the conference

International and Russian Union of Scientific and Engineering Associations, Krasnoyarsk Regional Union of Scientific and Engineering Associations, Krasnoyarsk Science and Technology City Hall are organizing III International Scientific Conference on Advances in Materials, Systems and Technologies - CAMSTech-III 2022. The Conference will take place in Krasnoyarsk on 29-31 July 2022.

Tashkent Institute of Irrigation and Agricultural Mechanization Engineers (Tashkent, Uzbekistan) and Bukhara Engineering Technological Institute (Bukhara, Uzbekistan) are partner universities of the Conference.

We invite scientists, specialists and research teams as well as representatives of the enterprises working in the spheres of materials science, automation and mechanical engineering to participate in the Conference.

The purpose of the Conference is to share the experience of leading experts in the application of innovative technologies, mathematical methods and information management systems in industrial production, in the fields of aerospace, energy and chemical engineering, materials science and design of new materials, as well as engineering and automation of technological processes.

Proceedings of Camstech-III published in AIP Conference Proceedings, volume 3021

Proceedings of Camstech-II - Sections 1-7 are published in AIP Conference Proceedings, Volume 2467

Proceedings of Camstech-II - Section 8 are published in IOP Conference Series: Materials Science and Engineering - Volume 1181

Proceedings of the I International Conference are published in IOP Conference Series: Materials Science and Engineering - Volume 919 (indexed in Scopus, RSCI).

 

Conference Programme


Videoreports of the participants


Presentations of the Participants


Reports and papers


CAMSTech-III-1001

Spacecraft Propellant Dispenser for Space Debris Disposal

Maria Barkova, Alexandr Zhukov, Igor Kartsan, Violetta Kuznetsova

Joint Stock Company «Russian Space Systems»; Expert and Analysis Center; Institute of Astronomy of the Russian Academy of Sciences, Moscow; Reshetnev Siberian State University of Science and Technology, Krasnoyars; Marine Hydro-physical Institute, Russian Academy of Sciences; Sevastopol State University, Sevastopol; Tula State University, Tula, Russia

CAMSTech-III-1002

The Peculiarities of the Evaluation of Discrete Deformation as New Theoretical Possibilities for Understanding the Mechanism of Deformation of Real Materials

A. S. Yurchenko

LLC Scientific Production Firm “Tekhosnastka-RTD” 404112, 3a Skladskoy Lane, Volzhsky, Russian Federation

CAMSTech-III-1003

Redundancy using motion compensation methods for image fragments

S.S. Beknazarova, A.Sh. Muhamadiev and Z.R. Ishanxadjayeva

Tashkent University of Information Technologies named after Muhammad Al- Khwarizmi

CAMSTech-III-1004

Impedance, dielectric susceptibility and inductance in HoxMn1-xS solid solutions

Maksim Sitnikov, Anton Kharkov, Hichem Abdelbaki, Fyodor Zelenov, Oleg Nikitinskiy, Eugenia Danilenko

Reshetnev Siberian State University of Science and Technology, Krasnoyarsk, Russia

CAMSTech-III-1005

Analysis of the Strength of the Materials of the Nozzles of the Space Debris Collector

Maria Barkova, Violetta Kuznetsova, Alexandr Zhukov, Igor Kartsan

Joint Stock Company «Russian Space Systems», Moscow; Tula State University, Tula; Expert and Analysis Center; Institute of Astronomy of the Russian Academy of Sciences, Moscow; Reshetnev Siberian State University of Science and Technology, Krasnoyarsk; Marine Hydro-physical Institute, Russian Academy of Sciences; Sevastopol State University, Sevastopol, Russia

CAMSTech-III-1007

Load-bearing control of materials and structures of multi-storey frame buildings

Svetlana Sazonova, Victor Asminin, Tatyana Zyazina, Dmitry Sysoev, Olga Sokolova, Alexander Osipov and Alexander Lemeshkin

Voronezh State Technical University; Voronezh State Forestry University named after G F Morozov; Voronezh State Pedagogical University; Voronezh State Technical University; Voronezh State Technical University; Voronezh State Technical University; Voronezh State University of Engineering Technologies, Voronezh, Russia

CAMSTech-III-1008

Silicon saturation of pipe steel AISI 321 at exposure in the silencing mixture over various time intervals

Aleksey Rubtsov, Djamshed Shermatov, Artemy Khabibullin, Ulyana Strokina

Ufa State Petroleum Technological University

CAMSTech-III-1009

Relationship between the Poisson's ratio and changes in the unit cell parameters of the body-centered crystal lattice of iron in the region of elastic deformation.

Yurchenko Stepan Anatolievich

LLC “TEHOSNASTKA-RTD” 662925, 2 Novaya Str., Petropavlovka, Russian Federation

CAMSTech-III-1010

Distribution of carbon and silicon in 1 X12CrNi25-20 pipe steel having different operating time, during siliconization

Bexultan Seitzhaparov,Aleksey Rubtsov ,Djamshed Shermatov ,Ulyana Strokina

Ufa State Petroleum Technological University

CAMSTech-III-1011

Thermodynamic theory of orientational phase transition in an inhomogeneously stressed easy plane weak ferromagnet

Mirzo Z. Sharipov, Dilnoz S. Ruzieva, Nilufar M. Ergasheva, Firdavs I. Olimpur

Bukhara engineering-technological institute, Bukhara, Uzbekistan

CAMSTech-III-1012

Тribological Properties оf Materials оf Sliding Steel Supports Laser-Hardened Shafts

Valery Alisin

Mechanical Engineering Research Institute of the Russian Academy of Sciences

CAMSTech-III-1013

Formation of silified layer in areas of welded joint of reaction furnance coil

Alexey Rubtsov, Djamshed Shermatov, Bexultan Seitzhaparov, Ulyana Strokina

Ufa State Petroleum Technological University

CAMSTech-III-1014

The simulation model of hydraulic devices’ noise level caused by pressure pulsation, vortex formation and damping of the medium.

Andrey Batrak, Mariya Polyushkina, Evgeniy Sheglov, Nikolay Polyushkin.

Department of Standardization, Metrology and Quality Management, polytechnical school, Siberian Federal University, Krasnoyarsk, Russia

CAMSTech-III-1015

Clarification of the Boundaries of Hunting Grounds in a Geographic Information System for the Rational Use of Biological Resources

Artеm Rada, Aleksandr Kuznetsov, Anton Timofeev

Kemerovo State University

CAMSTech-III-1016

Prediction of the accumulation process of the contact and fatigue damages in the welded rail joints

Zulfiya Fazilova, Alexey Loktev, and Ekaterina Gridasova

Russian University of Transport (MIIT), Moscow, Russia; Far Eastern Federal University, Vladivostok, Russia

CAMSTech-III-1017

Additive technologies application prospects for creation of repairable wear resistant inserts for the purpose of extension of hydraulic turbine flow part elements life

Alexey Mednikov, Aleksandr Tkhabisimov

MIREA - Russian Technological University, Moscow, Russia

CAMSTech-III-1018

PHB-based composites with various types of fillers: comparative stress tests

Nur Galyavetdinov, Guzel Ilalova, Ruslan Safin, Natalia Kraysman

Kazan National Research Technological University, Kazan, Russian Federation

CAMSTech-III-1019

Slow Release Mineral Fertilizers – the Production and the Usage Processes

I. Bamatov

FGBNU FIC “V. V. Dokuchaev Soil Science Institute” Pyzhevsky lane, 7s2, Moscow, 119017

CAMSTech-III-1021

Comparative Analysis of Algorithms for Optimizing the Weight Coefficients of a Neural Network when Adjusting its Structure Applying Genetic Programming Method

Pavel Sherstnev, Anastasiya Polyakova, Leonid Lipinskiy

Reshetnev Siberian State University of Science and Technology, Krasnoyarsk, Russia; Prof. V. F. Voino-Yasenetsky Krasnoyarsk State Medical University, Krasnoyarsk, Russia; Bekhterev National Medical Research Center of Psychiatry and Neurology, Ministry of Health of Russia, Saint Petersburg, Russia; Peoples’ Friendship University of Russia, Moscow, Russia

CAMSTech-III-1022

Problems of Material Selection in the Design of Disc Brakes Based on Magneto-Rheological Fluid

Ilya Frolov , Andrei Vorotnikov , Semen Bushuev , Yuri Poduraev

Moscow State University of Technology "STANKIN", Moscow, Russia

CAMSTech-III-1023

Tribological Studies of Friction Pairs during Lead-Bismuth Lubrication in Nuclear Power Pumps

Valery Alisin, Alexey Lukyanov, Mikhail Roshchin

Mechanical Engineering Research Institute of the Russian Academy of Sciences, Moscow, Russia

CAMSTech-III-2001

Simulation of Electron-Beam Welding Mode of a Thin-Walled Structure Made of Alloy AD31

Sergei Kurashkin, Yuriy Seregin, Vadim Tynchenko, Aleksander Murygin, Svetlana Kotelnikova

Reshetnev Siberian State University of Science and Technology, Krasnoyarsk; Siberian Federal University, Krasnoyarsk, Russia

CAMSTech-III-2002

Maximum stresses in flat cover of apparatus hatch under conditions of corrosion wear in presence of scratch on surface

Petr Kulakov, Aleksey Rubtsov, Veronika Gracheva, Vitaliy Afanasenko and Marina Bikmukhametova

Ufa State Petroleum Technological University, Ufa, Russia

CAMSTech-III-2003

The Unit for Producing Cuboid Crushed Stone from Rocks with a Shale Texture

Alexey Romanovich, Evgeniy Chekhovskoy, Marina Romanovich, Sergey Schastlivenko

Belgorod State Technological University named after V.G. Shukhov,Belgorod, Russia; K.N. Toosi University of Technology, Tehran, Iran

CAMSTech-III-2004

Features of the Kinematic Analysis of the Power Distribution Mechanism, Which Provides a Turn with Zero Radius

R Yu Dobretsov, V A Sokolova, E А Tikhonov, A I Karnaukhov, V V Taraban and S Ye Ariko

Peter the Great St. Petersburg Polytechnic University, St.Petersburg, Russia Military Academy of Communications named after Marshal of the Soviet Union S.M.Budyonny, Saint Petersburg, Russia Petrozavodsk State University, Republic of Karelia, Petrozavodsk, Russia Reshetnev Siberian State University of Science and Technology, Krasnoyarsk, Russia Saint Petersburg Mining University, Saint Petersburg, Russia Belarusian State Technological University, Minsk, Republic of Belarus

CAMSTech-III-2005

Logical Control Models of Industrial Material Processing Plants as Automation Objects

Elena Muravyova1 and Ilesjon Karimov

Ufa State Petroleum Technical University, Sterlitamak, Russia

CAMSTech-III-2006

Another Approach to Modeling of Fuzzy Drive Control System Based on Vector-Matrix Description

Sergej Cherniy, Alina Buzikaeva, Irina Povkh, Larisa Alekseeva, Viktor Mendel and Ruslan Bazhenov

Komsomolsk-na-Amure State University, Komsomolsk-na-Amure; Far Eastern State Transport University, Khabarovsk; Pacific National University, Khabarovsk;Sholom-Aleichem Priamursky State University, Birobidzhan, Russia

CAMSTech-III-2007

Simulation of the Process of Verification of Purchased Products in Notation BPMN

N Zh Shkaruba, O A Leonov, G N Temasova, Yu G Vergazova and D A Bogolubova

Russian State Agrarian University − Moscow Timiryazev Agricultural Academy, Moscow, Russia

CAMSTech-III-2008

Organization of Production Processes at Machine-Building Enterprises under Conditions of Digital Transformation

Sergey Novikov, Andrey Sazonov

Moscow Aviation Institute (National Research University), Moscow, Russia

CAMSTech-III-2009

Software Image Defect Detection of Full-Fashioned Textures in Textile Industry

Andrey Zatonskiy, Svetlana Varlamova, Saida Beknazarova, Tatiana Gorbunova, Petr Alutin, Oleg Belozerov and Ruslan Bazhenov

Perm National Research Polytechnic University, Perm, Russia; Tashkent University of Information Technologies named by Muhammad Al- Khwarizmi, Tashkent, Uzbekistan; Moscow State University of Civil, Moscow; Blagoveschensk State Pedagogical University, Blagoveschensk; Far Eastern State Transport University, Khabarovsk; Sholom-Aleichem Priamursky State University, Birobidzhan, Russia

CAMSTech-III-2010

Precise Logic Controllers with Steptime Fuzzification Algorithm of Input Parameters

Elena Muravyova and Dmitry Podlesskiy

Ufa State Petroleum Technical University, Sterlitamak, Russia

CAMSTech-III-2011

Web System of Fire Danger Evaluation and Forecast According to the Global Climate Model Global Forecast System

Vladimir Glagolev, Оlga Dolmatova, Elena Gafiatulina, Dmitrii Zhuravlev, Vasilii Masyagin and Ruslan Bazhenov

Sholom-Aleichem Priamursky State University, Birobidzhan; Omsk State Agrarian University named after P. A. Stolypin, Omsk; Far Eastern State Transport University, Khabarovsk; Primorskaya State Academy of Agriculture, Ussuriisk; Omsk State Technical University, Omsk, Russia

CAMSTech-III-2012

Automated Stand for the Electrical Testing and Diagnostics of Resource Characteristics of the Lithium-Ion Accumulators

Evgeniy Kopylov, Dmitriy Lobanov, Enis Mizrakh, Tatyana Oreshenko

Siberian State University of Science and Technology named after academician M. F. Reshetnev Krasnoyarsk, Russia

CAMSTech-III-2013

Probabilistic Characteristics of a Rough Layer Made Up of Pyramid-Type Irregularities

Igor Bobrovskij

Togliatti State University, Togliatti, Russian Federation

CAMSTech-III-2014

Parameters of a Rough Layer Formed by Conical Type Irregularities

Igor Bobrovskij

Togliatti State University, Togliatti, Russian Federation

CAMSTech-III-2016

influence of grain size on the hardness of metal

Y. N. Tsvetkov and Y. K. Loparev

Admiral Makarov State University of Maritime and Inland Shipping, 5/7, Dvinskaya str, Saint-Petersburg, Russia

CAMSTech-III-2017

Problems in Using the Microhardness Method to Assess the Ultimate Deformation of the Surface of Cast Alloys During Wear

Y. O. Fiaktistov, Y. N. Tsvetkov, E. R. Kudryavtseva, E. O. Gorbachenko and Y. K. Loparev

Admiral Makarov State University of Maritime and Inland Shipping, 5/7, 198035, Dvinskaya str, Saint-Petersburg, Russia

JSC "LENMORNIIPROEKT" 3/2, 198035,Mezhevoy canal, Saint-Petersburg, Russia

CAMSTech-III-2018

Approaches to Building Systems For Collecting and Processing Data on the Operation of Technological Equipment at Industrial Enterprises

Petr A. Nikishechkin, Anatoly N. Nikich

Moscow State University of Technology "STANKIN"

CAMSTech-III-3001

Prospects for the use of artificial intelligence technologies in the digital economy

Tatiana Subtselnaya, Sergey Tishchenko, Alexander Zolkin, Vladimir Tormozov, Anatoly Dmitriev

Lomonosov Moscow State University (Moscow), Moscow; Povolzhskiy State University of Telecommunications and Informatics, Samara; "Pacific National University", Khabarovsk; Siberian State University of Science and Technology named after Academician M.F. Reshetnev, Krasnoyarsk, Russia

CAMSTech-III-3002

Strategy for the Development of Resource-Saving Enterprises of the Industrial Complex Based on the Porter Model

Aleksey I. Shinkevich, Olga V. Antipova, Nadejda Yu. Psareva and Naira V. Barsegyan

Kazan National Research Technological University, Kazan; Almetyevsk State Oil Institute, Almetyevsk; State University of Management, Moscow, Russia

CAMSTech-III-3003

Evaluation of the Economic Efficiency of the Use of Aggregate Equipment in Mechanical Engineering

Oleg Leonov, Galina Temasova, Nina Shkaruba, Yulia Vergazova and Daria Bogolyubova

Russian State Agrarian University – Moscow Timiryazev Agricultural Academy, Moscow, Russia

CAMSTech-III-3004

Application of recurrent neural networks to predict the effect of the use of incentive stocks in retail chains

Mikhail G. Dorrer 1, Anatoly V. Fomin 2, Dmitry A. Loginov 2 and Alexander G. Ovchinnikov 2

Reshetnev Siberian State University of Science and Technology, 31, Krasnoyarsky Rabochy Ave., Krasnoyarsk, 660037, Russian Federation
2 LLC "MaxBonus", 5, Baturina street, Krasnoyarsk, 660135, Russian Federation

CAMSTech-III-3005

Application of Optimization Methods During Construction of Info Communication Systems

K. Goloskokov and V. Korotkov

Admiral Makarov State University of Maritime and Inland Shipping, 5/7 Dvinskaya St., St. Petersburg, 190031, Russia

CAMSTech-III-3006

The Role of Private Business in the Space Industry and

Roscosmos Corporation in the Development of Space Transport

Anton Smirnov, Elena Smyaglikova, Evgeniy Smolokurov and Alim Mazhazhikhovd

Admiral Makarov State University of Maritime and Inland Shipping, 5/7 Dvinskaya St., St. Petersburg, 190031, Russia

CAMSTech-III-3007

A modern approach to ensuring the safe navigation of foreign ships on the inland waterways of the Russian Federation

Karetnikov V.V.,
Burkov A.V.,
Prokhorenkov A.A.,
Efimov K.I.

Admiral Makarov State University of Maritime and Inland Shipping, 5/7 Dvinskaya St., St. Petersburg, 190031, Russia

CAMSTech-III-3008

Training on Arctic programs from the point of view of a university student

Svetlana Taranukha and Marina Saveleva

Admiral Makarov State University of Maritime and Inland Shipping, 5/7 Dvinskaya St., St. Petersburg, 190031, Russia

CAMSTech-III-3009

Using Neural Networks to Recognize Text Labels of Raster

Navigation Maps

Alexander Egorov, Nataly Krupenina and Lyubov Tyndykar

Admiral Makarov State University of Maritime and Inland Shipping, 5/7 Dvinskaya St., St. Petersburg, 190031, Russia

CAMSTech-III-3010

Neurointerface Modeling for Controlling Dynamic Systems

Yulia V. Tsymay, Anatoliy P. Nyrkov and Mariia V. Kardakova

Admiral Makarov State University of Maritime and Inland Shipping, 5/7 Dvinskaya St., St. Petersburg, 190031, Russia

CAMSTech-III-3011

Autonomous technical means – a tool of a transport security violator

Sergey S. Sokolov, Oleg N. Gubernatorov and Elizaveta K. Egorova

Admiral Makarov State University of Maritime and Inland Shipping, 5/7 Dvinskaya St., St. Petersburg, 190031, Russia

CAMSTech-III-3012

Trends in Road Construction in Russia: Analysis of

Financing of The Road Industry, The Experience of The

Scandinavian Countries and Development Prospects

Anton Smirnov, Evgeniy Smolokurov and Lia Gareeva

Admiral Makarov State University of Maritime and Inland Shipping, 5/7 Dvinskaya St., St. Petersburg, 190031, Russia

CAMSTech-III-3013

Prospects for the Development of St. Petersburg as a Smart

City on the Example of Introducing Modern Technologies in

its Transport System

Anton Smirnov, Evgeniy Smolokurov, Larisa Smirnova and Yuriy Fir

Admiral Makarov State University of Maritime and Inland Shipping, 5/7 Dvinskaya St., St. Petersburg, 190031, Russia

CAMSTech-III-4001

Effective organization of personal data protection

Dmitriy V Kornienko

Bunin Yelets State University

CAMSTech-III-4002

perating Life Expectancy Verification for the Spacecraft Equipment

Kristina Radionova, Tatyana Oreshenko, Dmitriy Lobanov

Siberian State University of Science and Technology named after academician M. F. Reshetnev Krasnoyarsk, Russia

CAMSTech-III-5001

Creation of a Spatially Distributed Detection System for Unmanned Aerial Systems

Valentin Lantsov, Alexander Koryakin

State Research Institute of Applied Problems (GosNIIPP), St. Petersburg, Russia

CAMSTech-III-5002

Application of Low-potential Heat for Heating Sports Facilities

Andrey Medyakov, Pavel Anisimov, Gulnaz Ismagilova, Anastasia Mironova and Pavel Lapygin

Volga State University of Technology

CAMSTech-III-5003

Optimization of Ecological Characteristics of Coal-water Suspension

Ludmila Kashkina, Olesya Stebeleva

Siberian Federal University, Krasnoyarsk, Russia

CAMSTech-III-5004

Position correction algorithm of bush pads when solving the problem of developing oil fields

Egor D. Kulakov, Anton S. Mikhalev, Alexander V. Sarenkov, Artem D. Shutalev, Artem E. Fedoreev

Siberian Federal University; LLC RN-KrasnoyarskNIPIneft, Krasnoyarsk, Russia

CAMSTech-III-5005

Cognitive Modeling Methods in Dynamic Systems Analysis

Olga V. Druzhinina, Olga N. Masina, Elena V. Igonina

Federal Research Center “Computer Science and Control” of Russian Academy of Science, Moscow, Russia; Bunin Yelets State University, Yelets, Russia

CAMSTech-III-5006

Change in Stress-Strain State ECU Furnace Coils During Operation

Evgeniy Zakirnichny, Valeriy Berdin, Aleksey Rubtsov, Valeriy Dementev

Ufa State Petroleum Technological University, Ufa, Russia

CAMSTech-III-5007

Features of the Mutation Operator for the Problems of Automatic Grouping of Objects

Vladimir Kazakovtsev, Lev Kazakovtsev

Reshetnev Siberian State University of Science and Technology, Krasnoyarsk, Russian Federation; Siberian Federal University, Krasnoyarsk, Russian Federation

CAMSTech-III-5008

Mathematical Simulation of Thermal Deformation Processes of Resistance Spot Welding

Yevgeny Yashmetov, Lev Kazakovtsev, Lyudmila Egorova, Aleksandra Korableva

Reshetnev Siberian State University of Science and Technology, Krasnoyarsk

CAMSTech-III-5009

Evolutionary Algorithm for Automated Formation of Recurrent Neural Networks

Pavel Sherstnev, Anastasiya Polyakova, Leonid Lipinskiy and Eugene Semenkin

Reshetnev Siberian State University of Science and Technology, Krasnoyarsk, Russia; Prof. V. F. Voino-Yasenetsky Krasnoyarsk State Medical University, Krasnoyarsk, Russia; Bekhterev National Medical Research Center of Psychiatry and Neurology, Ministry of Health of Russia, Saint Petersburg, Russia; Peoples’ Friendship University of Russia, Moscow, Russia

CAMSTech-III-5010

Greedy Algorithm for Finding Pareto Optimal Patterns

Igor Masich, Alena Stupina, Katerina Ponomareva

Siberian Federal University, Krasnoyarsk, Russia

CAMSTech-III-5011

Studying a Fuzzy Computing Resource Management System in a Coevolutionary Algorithm

Aleksandra A. Korableva, Lev A. Kazakovtsev, Leonid V. Lipinskiy, Iuliia A. Khudonogova

Reshetnev Siberian State University of Science and Technology, Krasnoyarsk, Russian Federation

CAMSTech-III-5012

Information Modeling of Technological Processes

Konstantin Goloskokov and Vitaly Korotkov

Admiral Makarov State University of Maritime and Inland Shipping, Saint-Petersburg, Russia

CAMSTech-III-5013

Trends in the Development of Navigation Aids by the Sky

Origins

Alcybeev G. O.,
Sibilev V. A.,
Kozik S. V.

Saint Petersburg State University, St. Petersburg, Russian Federation

Admiral Makarov State University of Maritime and Inland Shipping, St. Petersburg, Russian Federation

CAMSTech-III-5014

Mathematical Models for Software Development of Control Systems for Unmanned Vessels

Sergey S. Sokolova), German V. Danilin and Tatiana P. Knysh

Admiral Makarov State University of Maritime and Inland Shipping, Saint-Petersburg, Russia

CAMSTech-III-6001

Energy-Saving in the Process of Grinding Materials with an Anisotropic Texture

Alexey Romanovich, Dmitriy Agafonov, Marina Romanovich, Dmitriy Anenko, Aidin Salamzadeh

Belgorod State Technological University named after V.G. Shukhov,Belgorod, Russia; K.N. Toosi University of Technology, Tehran, Iran

CAMSTech-III-6002

Modeling of the Production System of Chemical Engineering Enterprises

Aleksey I. Shinkevich, Madina A. Agisheva, Lyudmila N. Ivanova and Rezeda R. Zaripova

Kazan National Research Technological University, Kazan, Russia

CAMSTech-III-6003

Theoretical Studies of the Vegetable Store Operation Using a Complex of Renewable Energy Sources

Vladimir Svechnikov, Andrey Medyakov and Yuri Sidyganov

Volga State University of Technology

CAMSTech-III-6004

Chemical Engineering as a Tool for the Development of Mesoeconomic Systems

Svetlana S. Kudryavtseva, Naira V. Barsegyan, Dmitriy V. Kharitonov and Andrey F. Battalov

Kazan National Research Technological University, Kazan; JSC "ONPP "Technology" named after A. G. Romashin", Obninsk, Russia

CAMSTech-III-6005

Testing of circuit breakers in production conditions

L A Panteleeva , P L Lekomtsev, E V Dresviannikova, D A Vasilyev, I R Vladekin

Izhevsk State Agricultural Academy, Izhevsk

CAMSTech-III-6006

Power quality in the power supply system of hybrid MHD stirrers of aluminum melt

Evgeny S Kinev, Alexey A Tyapin, Vasily I Panteleev, Mikhail V Pervukhin

Siberian Federal University, Thermal electrical systems LLC

CAMSTech-III-6007

About Corrosion Resistance of Super Hydrophobic Brass Surface

Marat Dasaev, Olga Kalakuckaya, Evgeniy Trushin, Sergey Grigoriev, Oleg Ryzhenkov

MIREA - Russian Technological University, Moscow, Russia

CAMSTech-III-6008

Improvement of the method for forecasting the risk of flooding of territories on the example of the Yenisei river in the area of the settlement of Vorogovo

Yaroslav Grebnev, Dinara Shagidulina, Moskalev Alexander

Siberian Federal University

CAMSTech-III-6009

Impact of surface currents on variations in levels and mean ice thickness of the Arctic seas

A. V. Kholoptsev, S. A. Podporin and E. O. Ol’Khovik

Zubov State Oceanographic Institute, Sevastopol, Russia

Sevastopol State University, Sevastopol, Russia

Admiral Makarov State University of Maritime and Inland Shipping, St. Petersburg, Russia

CAMSTech-III-7001

Automation of the decision-making strategy in the water resources management system

Inna Pivovarova, Alexander Zolkin, Adam Saparbiev

St. Petersburg University of the State Fire Service of the Ministry of Emergency Situations of Russia, Saint Petersburg; Povolzhskiy State University of Telecommunications and Informatics, Samara; Kadyrov Chechen State University, Grozny, Russia

CAMSTech-III-7002

Relationship between low-frequency components of the electroencephalogram and heart rate variability during hyperventilation

Vadim Titov, Olga Dick

Saint Petersburg State University of Aerospace Instrumentation, Saint Petersburg, Russia

CAMSTech-III-7003

Determination of the Effective Number of Hunting Animals Based on Geoformation Data about Hunting Grounds

Artеm Rada, Aleksandr Kuznetsov, Roman Zverev

Kemerovo State University

CAMSTech-III-7004

Features of rumen digestion in young meat breeds with difference in feeding

B. S. Ubushaev, A. K. Natyrov, N. N. Moroz, E. N. Ochirova, I. A. Nidzhlyaeva, S. A. Slizskaya and I. V. Tserenov

Kalmyk State University named after B. B. Gorodovikov, 11 Pushkin Street, Elista, 35800, Russia

CAMSTech-III-7005

Chickpea flour as a functional ingredient for stuffed and chopped semi-finished products

V. N. Khramova, D. I. Surkov, K. A. Lubchinsky, Ya. I. Khramova,

T. Yu. Zhivotova and Yu. D. Danilov

Federal State Budgetary Educational Establishment of Higher Education «Volgograd State Technical University»,

28, V.I. Lenin st, Volgograd, 400005, Russia

Volga Region Research Institute of Manufacture and Processing of Meat-and-Milk Production, 6, Rokossovskogo street, Volgograd, 400131, Russia

Don State Agrarian University, st. Krivoshlykova, 24 Persianovsky, 346493, Russia

CAMSTech-III-7006

Whole grain corn as part of mixed feeder a KR-1 for calves

V. F. Radchikov, T. L. Sapsaleva, I. V. Bogdanovich, A. N. Struk, A. A. Mosolov and M. I. Slozhenkina

RUE «Research and Practical Center of the National Academy of Sciences of Belarus on Animal Husbandry, 222163, 11 Frunze Str., Zhodino, Republic of Belarus

Volga Region Research Institute of Manufacture and Processing of Meat-And-Milk Production, 400131, 6, Rokossovsky street, Volgograd, Russia

CAMSTech-III-7007

The meat productivity of broiler chickens under the influence of glycine-containing feed additives

А. А. Mosolov, Z. B. Komarova, E. G. Abramenko, A. A. Ryadnov and M. I. Slozhenkina

Volga Research Institute of Production and processing of meat and dairy products, Volgograd, Russia

Volgograd State Agrarian University, Volgograd, Russia

CAMSTech-III-7008

The use of innovative natural organic substances in the production of broiler meat: efficiency and safety

A. V. Glushenko, A. A. Mosolov, A. Seidavi, Z. B. Komarova, M. I. Slozhenkina, I. F. Gorlov and E. A. Romanenko

Volga Research Institute of Production and processing of meat and dairy products, Volgograd, Russia

CAMSTech-III-7009

Maintenance of the stability of egg production by breeding the "Hisex brown" cross hens

Z. B. Komarova, M. I. Slozhenkina, E. G. Abramenko, A. A. Mosolov and O. P. Shakhbazova

Volga Research Institute of Production and processing of meat and dairy products, Volgograd, Russia

Don State Agrarian University, Persianovsky, Rostov-on-Don, Russia

CAMSTech-III-7010

Ecological and biological aspects of angiogenic stimulation of invasive neoplasms

A. S. Kuryndina, Yu. N. Melikova, L. F. Sotnikova and D. A. Vilmis

Department of diseases of small domestic, laboratory and exotic animals of the Moscow State University of food Production, Moscow, Russia

CAMSTech-III-7011

The effect of a balanced diet on improving the quality of life in malignant neoplasms

Yu. N. Melikova, A. S. Kuryndina, L. F. Sotnikova and S. N. Kolomiec

Department of diseases of small domestic, laboratory and exotic animals of the Moscow State University of food Production, Moscow, Russia

CAMSTech-III-7012

Mechanism for veterinary certification within the framework of ensuring integrated nvironmental security in the eurasian region

L. F. Sotnikova, I. V. Pogodina, A. F. Baranova and A. V. Gusarov

Department of diseases of small domestic, laboratory and exotic animals of the Moscow State University of food Production, Moscow, Russia

Department of Department of legal and organizational support of business procedures of the «Vladimir state University named after A. G. and N. G. Stoletovs», Vladimir, Russian Federation, Russia

CAMSTech-III-7013

Quality and organoleptic properties of cheeses obtained from the milk of cows of different kappa-casein genotypes (CSN3)

I. M. Volokhov, N. F. Shchegolkov, M. I. Slozhenkina, N. I. Mosolova, I. F. Gorlov, Y. D. Danilov, E. V. Karpenko and S. A. Surkova

All Russian Research Institute of Animal Breeding, Cattle breeding laboratory, Lesnye polyany 141212, Russia

Volga Region Scientific Research Institute of Meat-and-Milk Production and Processing, 6 Rokossovskу st., Volgograd, 400131, Russia

CAMSTech-III-7014

Efficient animal husbandry with the use of protein hydrolysates

F. I. Vasilevich, V. M. Bachinskaya, A. A. Deltsov and S. I. Chinchenkov

FSBEI HE «Moscow State Academy of Veterinary Medicine and Biotechnology – MVA by K. I. Scryabin» Moscow

109472, Russian Federation

Sovkhoz Golovkovo LLC, Moscow region, Naro-Fominsk district, village Golovkovo, Russia

CAMSTech-III-7015

Improving the technology of meat pates using vegetable raw materials of various origins

P. S. Kobylyatsky, М. I. Slozhenkina, Yu. D. Grebennikova, E. V. Karpenko, V. A. Karatunov and A. G. Zolotareva

Don State Agrarian University, 24, Krivoshlykova str., 346493, Persianovsky, Rostov region. Russia,

Volga Region Research Institute of Manufacture and Processing of Meat-and-Milk Production, Volgograd, Russia

Kuban State Agrarian University n.a. I.T. Trubilin, 13, Kalinina, 350044, Krasnodar, Russia

CAMSTech-III-7016

Some results of breeding for the transformation of productive qualities of merino sheep in the arid territories of the south of the Russian Federation

I. F. Gorlov, E. Yu. Anisimova, A. O. Reshetnikova, E. V. Karpenko, V. Kh. Fedorov, Y. A. Kolosov, N. V. Shirokova and N. N. Kolosova

Don State Agrarian University, 24, Krivoshlykova str., 346493, Persianovsky, Rostov region. Russia,

Volga Region Research Institute of Manufacture and Processing of Meat-and-Milk Production, Volgograd, Russia

Kuban State Agrarian University n.a. I.T. Trubilin, 13, Kalinina, 350044, Krasnodar, Russia

CAMSTech-III-7017

Heritability, age-related recurrence and relationship of protective blood factors in pigs

Fedorov Vladimir Christoforovich, Fedyuk Victor Vladimirovich, Shirokova Nadezhda Vasilievna, Kruglikov Alexander Nikolaevich and

Chertov Arkady Arkadievich

Don State Agrarian University Rostov region, Oktyabrsky district, p. Persianovsky, Krivoshlykova str., 24, 346493, Russian Federation

CAMSTech-III-7018

Functional changes of cattle in Ixodiasis disease

F. I. Vasilevich and A.M. Nikanorova

K.I.Skryabin Moscow State Academy of Veterinary Medicine and Biotechnology – MVA by K.I. Skryabin, Moscow, Russia

Moscow Timiryazev Agricultural Academy, Moscow, Russia

CAMSTech-III-7019

Changes in the immunobiological status of cattle in experimental Ixodiasis

F. I. Vasilevich and A.M. Nikanorova

K.I.Skryabin Moscow State Academy of Veterinary Medicine and Biotechnology – MVA by K.I. Skryabin, Moscow, Russia

Moscow Timiryazev Agricultural Academy, Moscow, Russia

CAMSTech-III-7020

Development of meat snack production technology using herbal ingredients

Y. P. Serdyukova, N. V. Shirokova, A. S. Venetsiansky,

E. L. Matveeva and T. S. Skoba

Don State Agrarian University, Rostov region, Oktyabrsky district, p. Persianovsky, Krivoshlykova str., 24, 346493, Russian Federation

Volgograd State University, 100, University Avenue, Volgograd, 400062, Russian Federation

3Kazan Innovation University named after V.G. Timiryasov, 42 Moskovskaya str., Kazan, 420111, Russian Federation

Novocherkassk College of Industrial Technology and Management, Atamanskaya St., 40, Novocherkassk, 346400,

Russian Federation

CAMSTech-III-7021

The study of the relationship of polymorphism of the growth hormone gene with some indicators of sheep meat productivity in the agroecological conditions of the Caspian Sea

E. Yu. Anisimova, N. V. Shirokova, I. F. Gorlov, Y. A. Kolosov, V. Kh. Fedorov, A. O. Reshetnikova and O. A. Knyazhechenko

Volga Region Research Institute of Manufacture and Processing of Meat-And-Milk Production, 6, Rokossovsky’s street, Volgograd 400131, Russian Federation

Volgograd State Technical University, 28, Lenin’s Avenue, Volgograd 400005, Russian Federation

Don State Agrarian University Rostov region, Oktyabrsky district, p. Persianovsky, Krivoshlykova str., 24, 346493, Russian Federation

 

Feedback