Conference materials

ASEDU-III 2022, ASEDU-IV 2024: International Conference on Advances in Science, Engineering and Digital Education

Conference Materials


IV International Conference

ASEDU-IV 2024: Advances in Science, Engineering and Digital Education

Conference Materials


About the conference


Website of the conference

The IV International Scientific Conference on Advances in Science, Engineering and Digital Education (ASEDU-IV 2024) was jointly organized by Bukhara Engineering Technological Institute and Navoi State Pedagogical Institute in cooperation with the International Union of Scientific and Engineering Associations. The conference took place in May 29-31, 2024 in Navoi, Uzbekistan.

The primary aim of ASEDU-IV 2024 was to share research findings and explore future prospects in the development of science, technology, professional education, scientific and technical education, computer technologies and digital educational environments, all enabled by innovative approaches. The conference program highlighted cutting-edge advancements in science, engineering and digital education, showcasing modern achievements in natural sciences, engineering and digital education. Key note speeches and discussions centered around the critical issues of introducing contemporary methods and technologies into technical and digital science and education. This included examining trends and outlooks for mathematics, physics, computer science, vocational training and other domains within modern science and technologies.

The conference attracted participants representing approximately 100 universities, research institutes, organizations and industrial enterprises from Uzbekistan, China, Cuba, Vietnam, Tajikistan, Kazakhstan, Kyrgyzstan, Russia and other nations.

The proceedings volume features papers presented at ASEDU-IV 2024 across six scientific tracks:

  • Engineering and Applied Technologies;
  • Materials Science and Theoretical Studies;
  • Environmental and Natural Science for Sustainability;
  • Industrial and Construction Engineering: Innovations and Professional Development;
  • Digital Transformations in Science and Education: New Trends and Technologies;
  • Innovations in Computer Science and New Educational Technologies.

The papers included are based on presentations made at the conference. Over 450 reports were submitted to the Organizing Committee, with 269 selected for publication in this volume after a rigorous peer-review process by the conference committee and international reviewers. Selection was based on the quality and relevance of the papers to the conference themes. The high scientific quality of the papers is a testament to the efforts of the contributing authors. The Conference Committee and organizers would like to express their sincere gratitude to all authors who contributed to this volume, as well as to the reviewers, speakers and participants for their support in making ASEDU-IV 2024 a success.

Proceedings are sent to AIP Conference Proceedings.

Presentations of the participants


Reports and papers of the participants


  1. Use of a NIR Camera and Laser-Based Illumination to Improve the Visibility of Blood Vessels in a Surgical Wound During Massive Bleeding
  2. Life Cycle Model of the Production and Logistics System of a Machine-Building Enterprise
  3. Applying the CI/CD Practices to Mobile Product Development
  4. The Impact of the Level of Digital Development on the Competitiveness of the Integrator Company
  5. Calculation Method of Hydraulic Operation of Trailer Unlouding Device
  6. Simulation of a High-Pressure Heat Accumulator Housing Made of Dispersed Reinforced Concrete by Means of Computer Engineering
  7. Improvement of Vibration Protection of Operators of Road Construction Machinery
  8. Application of BIM Technology in the Design of Maintenance Stations
  9. Evaluation of the Efficiency of the Electric Power Storage Device in Traction Power Supply When Controlling the Load Level
  10. To the Substantiation of the Design and Technological Scheme of Two Flow Fuses to Protect the Milling Drum of Forestry Machines From Overload
  11. Modeling of Deformation of Heavy Reinforced Cement for Conical Parts of a High-Pressure Housing
  12. Automation of Managerial Decision-Making in Innovative Activity of Industrial Enterprises on the Basis of Complex Assessment
  13. Linear Сombination of AR(1), MA(q) Models With Minimal Forecast Variance
  14. Overview of Technical Solutions for Devices for Cleaning and Disinfecting Surfaces
  15. Automated Measurements of Electrical Conductivity of Thin Metal Films Using Modern Eddy Current Methods
  16. Research of Downtime of Urban Passenger Transport Waiting for Additional Passengers at Stop Points
  17. Saving Technologies for Operating Power Plants
  18. Criteria for the Effectiveness of Technological Operating Modes Units as Part of Human-Machine Systems
  19. Electric Pulse Technology as an Energy-Efficient and Economically Feasible Method of Rock Destruction
  20. Influence of Variable Stiffness Section Design Parameters on the Track Operational Characteristics
  21. Development of an Intelligent Control System for a Racing Car on a Complex Shape Track
  22. Mathematical Description of Abrasive Tool Models
  23. Method of Balancing a Rotational Shaft for Grain Grinding
  24. Exploring Material Characteristics of Shafts in Rotary Milling Machines
  25. Study on the Oscillations of the Euler-Bernoulli Beam on an Elastic Base
  26. Introduction of Bodies of Rotation Into a Half-Space in a State of Complete Plasticity
  27. Calculation Method for Underground Special Structures Under Natural Vibrations and Dynamic Influences
  28. Thermal Stress-Strain State of a Partially Thermally Insulated and Clamped Rod in the Presence of Local Temperature and Heat Transfer
  29. Development and Research of Reclamation Ripper Volumetric Type for Deep Loosening of Heavy Soils
  30. Modernization of PLC Program for a CNC Turn Machine for Bringing the Production Automation Tools Into Use
  31. Experience in Improving the Technology of Uranium Processing From Technological Solutions of In-situ Leaching
  32. Advanced Process Control of the Gas Compressor at Oil-Producing Enterprises
  33. Study of the Influence of Main Factors on the Mass and Density of Saw Fiber Separator Raw Material
  34. Improvement of Instrumental Neutron Activation Technique of Elemental Composition Analysis
  35. Development of Mathematical Models, Numerical Algorithms and Software for Monitoring and Forecasting the Processes of Heat Transfer and Moisture Loss During the Storage of Grain and Cereals
  36. Mathematical Modeling of the Pastilla Jam Drying Process
  37. Evaluation of the Mineral Extracted Volume in Open Pit Mines in the Holguín Area of the Republic of Cuba
  38. Application of Polymer Gears in Agricultural Machinery
  39. Program and Methods of Experimental Studies of the Drive Seed-Removing Pipe
  40. Features of Reverse Engineering Technology
  41. Analysis of the Effectiveness of Using Solar Panels in the Baltic Region
  42. Implementation of the Arduino Microcontroller for Detecting Technological Faults in the Pipeline
  43. Mathematical Modeling and Research of High Capacity Lead-acid Stabilized Accumulator Battery
  44. Using an Arduino Microcontroller for Inspection and Analysis of Workshop Operation
  45. Robotics Method for a Passenger Car Body Assembly Production Site
  46. Efficiency of Processing Soft Hardwood for Housing Construction
  47. Increasing The Durability of Combine Harvester Knives Using Hardening Boride Coatings
  48. Acceleration of the Continuous Drying Process in a Convective Dryer with a Self-Rotating Plate
  49. Determining The Components of Local Industrial Waste and Recycling Them Into Liquid Complex Fertilizers
  50. Justification of Milling Cutter Parameters for Soil Processing and Plant Residue Grinding
  51. Determination of the Parameters of the Working Members of the Straw Clipper Used in Agriculture
  52. Analysis of the Braking Path of Cars Equipped With ABS in Different Environments
  53. Increasing the Efficiency Fluid Extraction From Raw Hides by Pressing
  54. Improvement of the Exploitation Performance of Light Vehicle Internal Combustion Engines by Addition of Hydrogen Fuel
  55. To the Theory of Multi-photon Interband Linear-Circular Dichrosim in Monoatomic Layers of Dichalcogenide Metals
  56. Mathematical Modeling of the Influence of the Gating System on the Quality of the Cast Product During Alloy Casting
  57. Determination of Technological Parameters of Peno-Concrete Based on Local Materials
  58. Assessment of the Electric Drive Wear Based on the Analysis of Current and Voltage Harmonic Parameters
  59. Theoretical Analysis of Multi-Photon Interband Optical Transitions in Monoatomic Layers of Dichalcogenide Metals
  60. Dynamic Characteristics of Radial Actively Lubricated Bearings with Semi-Active Control
  61. Comparative Analysis of Volumetric Precision Models of Multi-Axis Machines
  62. Free Vibrations of a Spherical Shell With a Pinched Edge
  63. Digital Technologies in the Oil and Gas Complex
  64. Соmplеtе Fасtоr Еxpеrimеnts оf Gеаr-Lеvеr Diffеrеntiаl Trаnsmissiоn Mесhаnism With Mоvаblе Аxеs
  65. Classification and Processing Requirements for Equipment
  66. Discrete Random Variables and Their Numerical Characteristics in the Problem of Mastering Information Theory and Reliability
  67. Method for Producing Anti-Corrosion Paint Based on Nanostructured Polyvinyl Varnish
  68. The Results of Experimental Studies on Noise Protection of Vibration Damping Thin-Walled Metal Structures With Discrete Rubber Inserts
  69. Finding the Optimal Number of Quasi-Layers When Calculating the Ore Flotation Process
  70. Influence of Soil Type on the Detection of Oil Spills in the Near Infrared Range
  71. Physico-Mathematical Model for Water Desalination in a Combined Water Treatment System
  72. Interval Model of a Vibration System for an Automobile Suspension
  73. Methodology for Calculating Technical and Economic Indicators of Ore Deposit Development Systems at Great Depth
  74. Obtaining an Object Model in the Development of Predictive Control Systems
  75. Mathematical Planning of the Process of Dyeing Knitted Fabric With Natural Dyes
  76. Multi-Criteria Optimization - Multi-Objective, Closing Link: SIMUS METHOD. Case study: Wind energy Parks Province of Holguín - Cuba
  77. Systems Advanced Control of a Non-Stationary Object With Prognostic Models
  78. Definitions of Influential Aspects of Technical Characteristics of Preventive Footwear for Diabetes Mellitus
  79. Modeling Of Deforming Treatment of Wood Composites at Their Gluing
  80. Matrix of Strategic Analysis of Enterprise Readiness Levels for Inclusion Into an Industrial Cluster
  81. Influence of Constant Load Speed on the Response of a Viscoelastic Multilayer Plate Lying on a Deformable Base
  82. The Behavior of Uranium in the System: Ore Clay - Barren Clay - Ore Sand
  83. Application Of Energy Recovery Mechanism in Mining Equipment
  84. Restoration Passport of a Metal Object in the Context of Professional Ethics
  85. Method of Active Heating of Electrolytic Capacitors Used in the Arctic
  86. Electromagnetic Sensor for Monitoring Truck Axle Load
  87. Assessment of the Performance of Through-The-Earth Alerts Systems for Mines in the Arctic Region
  88. Research of SCADA Control System in Direct and Return Mains of CHPP and Development of a Concept for Its Economic Modernization
  89. The Development of the Method of Increasing the Storing Capability of Technogenically Disturbed Lands
  90. Geology and Mineralogical-Geochemical Features of Uranium Ores of the Deposit of Central Kyzylkum
  91. Dynamic Characteristics of a Multilayer Heterostructure
  92. Methods for the Synthesis of 2-Phenylquinazolin-4-one and Studying Methylation Reactions in Different Solvents
  93. Methodical Approach to Assessing Energy Efficiency Factors of a Gas Company
  94. Assessment of the Multiplier Effect of Diversification of the Rural Economy
  95. Digital Diagnostic Complex for Identifying and Development of Engineering and Technical Abilities of Adolescents and Youth
  96. Determination Of Colorimetric Properties Of Paper Containing Polyester (Lavsan) Fiber Waste
  97. Comparative Analysis of Physical and Biochemical Methods for Obtaining Lysates
  98. Methods of Interval Analysis in Teaching Mathematical and Computer Modeling
  99. Methodological Insights Into Symmetry and Conservation in Quantum Physics
  100. Solubility of Air Oxygen and Ozone in Water and Acidic Solution
  101. Enhancing the Natural Science Education
  102. Statistical Approach to Solving the Inverse Problem of Electrocardiography
  103. Use of a Promising Strain of Lactobacillus Plantarum 131 as a Starter Culture for Fermented Sausage Production
  104. Study of Possibilities of Introduction of Automated Management Technology in Home Crop Production 
  105. The Need and Economic Significance of the Construction of the Shorkul Reservoir
  106. Study of Wood Impregnation Using a Vacuum Installation
  107. Grain Dust Plant Nutrition Source
  108. Mathematical Approaches to Determining the Physical Parameters of Giant Planets
  109. The Role of Virtual Demonstration Experiments in Teaching the Ideal Gas Law
  110. Calculation of Oil (Gas) Reserves and Associated Components of the Albian Formation K 1 al Using the Example of the Vladimir Filanovsky Field
  111. Mathematical Analysis of Sustainable Development of the Region: Demographic Aspect
  112. The Synthesis of Aminobutylenical Esters Linolenic Acids and Lipid-Lowering Activity
  113. Quantitative Determination of Radum and Radon Contents in Natural Waters of the Uranium-Bearing Region
  114. Results of a Study on the Mechanization of Photodegradable Film Application in Cotton Crops
  115. Interdisciplinary Teaching Methods for Exploring the Planet Saturn in Astronomy
  116. Jordanian Zeolites as Sustainable Material for Green Technology
  117. Study of Failure of Casing Mechanisms in Incompatible Zones During Drilling
  118. Facies Heterogeneity and Production of Oil Reserves: Conditions, Reasons and Results
  119. Application of Artificial Intelligence Technologies in City Farming and Home Cultivation
  120. Improvement of Independent Education of Students in Biological Science Based on Information Communication Technologies
  121. Increasing the Effectiveness of Teaching Physics Through Virtual Laboratories
  122. Formation of the Solid Phase in Ternary Water-Amino Acid Systems, H 2 Asp–HGly–H 2 O at 25 o C
  123. A Semiparametric Estimator for the Exponential Distribution Under Informative Double Censoring
  124. Methods of Developing the Competence of Technological Education Teachers
  125. Methodological Recommendations for the Development of Creative Competence of Future Physics Teachers Based on Digital Educational Tools
  126. A Scientific Approach to Enhancing Ecological Competence Through Life Activity Safety
  127. Morphological Characteristics of the Bladder and Kidneys of Rabbits at Different Time Periods After Cystostomy Using a New Modification of the Veterinary Catheter: Experimental Study
  128. On the Advantages of Interval Methods for Solving Nonlinear Equations and their Systems When Teaching Numerical Methods
  129. The Research Into the Influence of the Gap Between the Seed Removing Pipe and the Auger on the Mechanical Damage of Seeds
  130. Synthesis of Urea Derivatives Based on Toluyl Isocyanate
  131. Study of Hydrodynamic Modes of Column with Convex-Concave Plate in Implementation of Matter Exchange Processes
  132. Methodology of Qualimetric Assessment of Professional Competence of Future Biology Teachers in the Conditions of Inclusive Education
  133. Effect of Mobile Load On a Ribbed Multilayer Cylindrical Shell With a Visco-Elastic Filler
  134. Development of Polyvinyl Chloride Compositions with Polyphenylene Ether and Investigation of Their Properties
  135. Modern Digital Principles of Life Safety
  136. Application of the CANARSPI Control Method for a Digital Twin of an Enterprise by the Durbin-Watson Test
  137. Formation of the Structure of Naturally Colored Cotton Fiber
  138. Properties of Plants for the Accumulation of Heavy Metals in Phytoremedition
  139. Principles of Modern Methods for Achieving Educational Results in Natural Science Subjects
  140. Analyzing the Environment for Fostering Innovative Eco-Education Competence in Students
  141. Research the Process of Drying Fruits, Poly Products and Vegetables in Vacuum Sublimation
  142. Mineral Associations in Small-Scale Mining in Southern Ecuador Using X-Ray and Petrographic Analysis
  143. Study of the Technological Process of Vegetable Oil Refining as an Object of Monitoring, Control and Management
  144. Analysis of the Impact of Geographical Location on the Accuracy of Operational Forecasting of Renewable Energy Resources
  145. Architectural and Planning Approaches to the Formation of Urban Leisure Centers
  146. Project-Based Learning as a Mechanism for the Enhancement of Cognitive and Communicative Skills in STEM Education
  147. Increasing Professional Competence of Students Based on Modern Graphics Programs
  148. Ethical Professional Values of Restorers-Conservators
  149. The Approaches in the Design of Youth Centers in the Republic of Tatarstan
  150. The Role of Project-based Learning in Developing Students' Reflectivity: Experience in STEM Education
  151. Formation of Competencies Among Students When Studying the Discipline "Descriptive Geometry and Computer Graphics"
  152. Dynamics of Landscape Structure in the Conditions of Spatial Growth of the City
  153. Strategies for Developing Personal Competencies of Physics Teachers
  154. Methodology of Using Problem Educational Technologies in Teaching the Science of Mathematical Analysis
  155. Engineering of a Laboratory Stand for Experimental Detection of Defects in Dielectric Personal Protective Equipment
  156. Energy Supply System of the Dock Underwater Station from a Float Wave Power Plant With Unidirectional Continuous Rotation of the Generator Shaft
  157. Mathematical Modeling of the Process of Controlling the Windings of DC Electromagnets When Creating Vibrations in the Range Audio Frequencies
  158. Simulation Model of an Electric Train With Energy Storage Systems Based on Artificial Intelligence
  159. Regional Investment Policy and Improvement Solutions
  160. Clark-Wright Algorithm in Routing Small-Batch Cargo Transportation
  161. Improving the Efficiency of Cargo Delivery by Automobile Vehicles
  162. Design Thinking: A New Model of Artistic Design of a Modern Costume Based on the Principles of Architectural Bionics
  163. Analysis of Blended Learning in Higher Education
  164. The Typology of Kazan Estates: From Origins to Modernity
  165. Assessment of Energy Losses for Low-Frequency Communication Systems in the Norilsk Ore District Geological Structures
  166. Actual Problems of Teaching Technical Disciplines
  167. Coulometric Method of Measuring the Concentration of Harmful Substances in the Transit Gas
  168. Effectiveness of Students' Use of an Electronic Workbook in Developing the Professional Competence of Future Transport Engineers
  169. The Impact of the Milling Process as a Key Factor in Pulp and Paper Manufacturing
  170. Improving the Precision of a Computerized Contact Interferometer Based on Digital Calibration of the Scale Image
  171. Development and Innovation of Energy Installations for Environmentally Friendly Transports
  172. Estimating the Exponential Distribution Parameter in the Proportional Hazard Model
  173. The Role of Digital Innovations and Human Resource Potential in Advancing Education
  174. Using Electromagnetic Levitation Method in Mining
  175. Development of Methodology for Competency Hierarchy Formation for an Engineering Technologist Based on Analytic Hierarchy Process
  176. Project-Based Learning Programs in STEM: a Review of Main Approaches
  177. Developing the Competence of Future Specialists Through Solution of Professional Problems
  178. Development of Technologies and Classification Schemes for Mining Technogenic Ore-Rock Formations
  179. Optimization of Control System Parameters Under Deterministic and Random Perturbations
  180. Cross-Cutting Technologies in the Digital Educational Environment
  181. Prospects for the Development of Education through Project-Based Learning
  182. Recommendations for Developing a Safe Machine Learning Ontology
  183. Didactic Conditions of Formation of Professional Applied Mathematical Preparation of Future Engineers
  184. Practical Application of Pedagogical Design in a Technical University 
  185. The Application of Artificial Intelligence and the Internet of Things to Solve Challenges of Practical Relevance
  186. Improving the Efficiency of Forest Industry Enterprises Through Sustainable Development Practices
  187. Improving Thinking and Imagining Skills in School Students by Training the Physics Using Simulations
  188. Analysis of Factors and Aspects in the Study of Internet Addiction
  189. Interdisciplinary Project-Based Learning in STEM Education: Advantages and Specifics of Organization
  190. Algorithms and Models of Self-Analyzing Systems for Practical Tasks of Students
  191. Identification of the Impact of the COVID-19 Pandemic on University Students’ Academic Performance Based on Intelligent Analysis of Educational Data
  192. Data Mining of Scientific Publications on the Perimeter Security of Long-Distance Facilities
  193. Simulation Modeling of Production Processes as a Factor in Sustainable Development of the Forestry Industry
  194. Exploring Personality Development and Assessment Options for University Students
  195. Mathematical Modeling for Evaluating Transport and Technological Processes in Wood Supply Chains
  196. Quality Management Methods and Their Role in Improving the HACCP Food Safety System at the Enterprise
  197. Studying the Characteristics оf Discrete Fourier Transformation in the Application of Measurement Control Systems
  198. Hardware-Software Platform for Measuring Predictive Control and Configuration of Multifunctional Measuring Transducers
  199. Software Control System by the Charge Sintering Process
  200. Digital Cluster: Opportunities and Competitive Advantages
  201. Development of Software for Conducting Quality Assessment of Emergency Response Operations
  202. The Decomposition Algorithm of the Formal Context Into Fragments
  203. Innovative Uses of Digital Technologies in Teaching Humanities in Higher Education
  204. The Role of Innovative Methodologies in the Implementing the Electronic Educational System: Agile, Scrum, and EduScrum
  205. The Evolution of PR and Advertising Services in Uzbekistan's Digital Sphere
  206. Educational Webinar as an Interactive Tool to Improve Student Learning Efficiency
  207. The Role of Blum’s Taxonomy in the Development of Students’ Critical Thinking
  208. VR Technology in Distance Student Science Olympiads in Geography
  209. An Interdisciplinary Approach to the Study of Conflict Situations in Structurally Complex Production Systems
  210. Opportunities for the Development of the Independent Educational Activity of Future Teachers Based on Digital Technologies
  211. Environmental Factors of Students' Professional Orientation in Extracurricular Activities
  212. Organization of Independent Education in the Credit-Module System Using Web Applications
  213. Prospective Directions and Stages of Creation of Smart Technologies in the Educational System
  214. Advantages of Organizing Lectures Based on Smart Technologies
  215. Virtual Technologies in Innovative Educational Practices
  216. Integration of Digital Technologies Into the Educational Process
  217. Digital Education: Augmented Reality in EFL Classroom
  218. Improving Innovative Activities Based on Software in Digital Learning Environment
  219. The Impact of Digital Technologies on the Development of Human Resource Management Strategy
  220. Prospects of Modern Education with the Introduction of New Information and Communication Technologies
  221. The Use of Modern Pedagogical and Information Technologies in Biology Lessons
  222. Modern Methods of Organizing Independent Education of Students in a Digital Educational Environment
  223. The Method of Designing a Medical Database for Students
  224. Origin and Evolution of Digital Ergo-Ecology in the Conditions of Socio-Technogenic Development of the World
  225. Gamification in Digital Educational Practices of Technical Universities
  226. Computer Games and New Sports in the Teaching of Physical Education and Basic Military Training
  227. Models and Algorithms for Introducing Blockchain Technologies in Education
  228. Virtual Local Networks: Technology for Combining Remote Nodes Into a Single Space
  229. Using E-Learning System: Mathematics Teaching Experience at University
  230. Methodology for Testing of the Developed Network Software for the Use of New Attack Techniques
  231. Development of an Augmented Reality-Based Mobile Application for Articulation Therapy Work with Preschool Children with Speech Impairments
  232. Interactive Application for Demonstrating the Fairness of the Laws of Set Theory and Equality of Sets
  233. Improving the Process of awarding Scholarships at a Higher Education Institution using the ELMA BPM System
  234. Role Play Speaking Games and ICT in Teaching EFL
  235. Mathematical and Statistical Analysis of Students' Mastery Levels in the Programming Environment for Teaching Informatics and Digital Technologies
  236. Improving the Professional Competence of Future Economists With the Help of Programming Languages
  237. Analysis of the MООDLE Platform at Bukhara State University
  238. Creation of Environmental Pollution Monitoring Systems Using Digital Educational Technologies
  239. Decision Support for Choosing VR Technologies
  240. Methods of Teaching the Basics of Programming to Bachelors of Computer Science at Bukhara State University
  241. Methodology for Developing Students' Algorithmic Thinking About Creating Applications
  242. Utilizing Information Communication Technologies in Contemporary Biology Education
  243. Developing Student Competencies in Computer Hardware and Software Provision
  244. The Role and Impact of AI-Enhanced Virtual Laboratories in Mechanical Engineering Education
  245. Effective Methods for Organizing Laboratory Sessions in Programming Language Courses
  246. Enhancing the Teaching of Electrical Capacity and Capacitors Through Practical Training
  247. Basics of Developing the Competence of Future Computer Science Teachers Using Digital Technologies
  248. Developing Students' Competence in Designing Three-Dimensional Learning Tools
  249. Using Ontological Approach in Organizing Educational Processes
  250. Semantic Modeling of the “Publisher-Subscriber” Scheme of the IoT Network for Choosing Broker Settings
  251. Information Technologies in the Formation of Correct Articulation Apparatus of Foreign Language Learners
  252. Organizing Practical Classes in Computer Graphics
  253. Evaluation of Efficiency in the Organization of Self-Study With the Assistance of Digital Educational Tools From Mathematics to Statistics
  254. Blockchain Technologies in Scientific Research
  255. Features of the Computer Algebra System Maple for Studying Boolean Algebra
  256. Methodology for Developing Students' Algorithmic Thinking About Programming
  257. Computer Modelling of Physical Objects and Phenomena as a Tool for Solving Professional Tasks
  258. Integrating Mobile Technologies Into Programming Instruction for Classroom Activities
  259. Virtual Technologies in the Educational Process Development
  260. Method of Organization of Classes in Higher Education Institutions Using Flipped Classroom Technology
  261. Optimizing Mechanical Engineering Curriculum Design Using AI and Machine Learning
  262. AI-Driven Automated Grading Systems for Mechanical Engineering Education
  263. The Role of AI-Driven Intelligent Tutoring Systems in Enhancing Mechanical Engineering Education
  264. Convolutional Neural Networks in Human Body Movement Recognition: an Experimental Investigation
  265. Training of an Engineering Specialist at a University in the Context of Integrating the STEM Approach and the QFD Methodology
  266. Developing an IoT-Based Remote Monitoring System for Smart Homes Using Arduino Ethernet Shield
  267. ICT in Teaching Communication Skills to Engineering Specialists
  268. Organization of Practical Classes in Physics Based on Interdisciplinary and Industrial Integration
  269. Assessing the Sustainability of Light Industry Sectors in the Competitive Struggle of the Region

III International Conference

ASEDU-III 2022: Advances in Science, Engineering and Digital Education

Conference Materials


About the Conference


WEBSITE OF THE CONFERENCE

International and Russian Union of Scientific and Engineering Associations, Krasnoyarsk Regional Union of Scientific and Engineering Associations, Krasnoyarsk Science and Technology City Hall and Krasnoyarsk State Pedagogical University named after V. P. Asfafyev are organizing III International Conference on Advances in Science, Engineering and Digital Education – ASEDU-III 2022. The Conference will take place in Krasnoyarsk on 8-10 December 2022.

Scientists and faculty from Russian and foreign universities, academic institutes, practitioners, graduate students, teachers of vocational and higher education, schools and institutions of additional education are invited to participate in the Conference.

The purpose of the Conference is to share the results and prospects in the development of science and technology, professional, scientific and technical education, computer technologies and digital educational environment based on innovative technologies. The conference is dedicated to advanced technologies in science and technology, modern achievements in the field of natural science, engineering and digital education. The key speeches and discussion will be devoted to the urgent issues of introducing modern methods and technologies in technical and digital education, including the trends and prospects of modern education in mathematics, physics, computer science, vocational training, etc.

The Proceedings of ASEDU-III 2022 are published in AIP Conference Proceedings , volume 2969. Indexed in Scopus.

The Proceedings of ASEDU-II 2021 are published in AIP Conference Proceedings, volume 2647. The Proceedings of ASEDU-I 2020 have been published in Journal of Physics: Conference Series - Volume 1691 (indexed in Scopus, RSCI).

Presentations of the participants


Videoreports of the participnats and the video of the session


Conference Programme


Papers and reports of the participants


Section 1. Engineering, materials sciences and information technologies


ASEDU-III-1001

Method for Increasing Efficiency of Ultrasonic Coagulation due to Secondary Acoustic Effects

Andrey V. Shalunov, Victor A. Nesterov, Roman N. Golykh, Alexander S. Bochenkov, Roman S. Dorovskih, Vladimir N. Khmelev

Biysk Technological Institute (branch) of the Altay State Technical University

ASEDU-III-1002

Functioning of a quadrature receiver for automatic train signaling under frequency instability conditions and with a random phase of the signal carrier wave

R.R. Iusupov, A.S. Khokhrin, A.L. Zolkin, I.N. Zaitseva and A.S. Bityutskiy

Samara State Transport University, Samara; Povolzhskiy State University of Telecommunications and Informatics, Samara; Bunin Yelets State University, Lipetsk region, Elets, Russia; "Invent Technology" LLP, Almaty, Kazakhstan

ASEDU-III-1003

Ultrasonic transducers for excitation of fluctuations in gas ducts

V.A. Nesterov, O.N. Morozova

Biysk Technological Institute (branch) of the Altay State Technical University, Biysk, Russia

ASEDU-III-1005

The effect of the cooling rate on the microstructure and mechanical properties of fasteners

A. D. Chernyshev , A. E. Pоsalina, I. A. Murog, A. S. Asaev and Yu. A. Metelev

Ryazan Institute (branch) of the Moscow Polytechnic University, Ryazan, Russia; LLK ZVK "Bervel", Ryazan, Russia.

ASEDU-III-1006

The Method of Dual-Frequency Influence on Gaseous Media to Increase the Efficiency of Coagulation

D.S. Abramenko, A.E. Puzhaikina, O.N. Morozova

Biysk Technological Institute (branch) of the Altay State Technical University, Biysk, Russia

ASEDU-III-1007

Research of contact and non-contact ultrasonic drying of textile materials

Sergey Terentiev, Maria Kosheleva, Pavel Tertishnikov and Aleksandr Barsukov

Biysk Technological Institute (branch) of the Altay State Technical University, Biysk, Russia Russian State University named after A.N. Kosygin (Technologies. Design. Art), Moscow, Russia

ASEDU-III-1008

Analysis and parametric optimization of a turn of a meander line with broad-side coupling in different environments

Konstantin P. Malygin, Alexander V. Nosov, Roman S. Surovtsev

Tomsk State University of Control Systems and Radioelectronics, Tomsk, Russia

ASEDU-III-1009

Investigation of the Application of 3D Printing Technology in the Foundry of Large-Sized Parts

A. V. Balyakin, R. A. Vdovin, E. S. Goncharov, E. P. Zlobin and M.A. Oleynik

Samara University, Samara, Russia

ASEDU-III-1010

Influence of Vortex Acoustic Flows on Compaction of Aerosol Particle Cloud

A.V. Shalunov, V.N. Khmelev

Biysk Technological Institute (branch) of the Altay State Technical University, Biysk, Russia

ASEDU-III-1011

Summation of oscillations of high-frequency Langevin transducers to increase the power of an ultrasonic emitter

Vladimir N. Khmelev, Victor A. Nesterov and Alexander S. Bochenkov

Biysk Technological Institute (branch) of the Altay State Technical University, Biysk, Russia

ASEDU-III-1012

Selection of CPU Architecture for the Control Unit Implementation in Assembler

Mikhail Saramud, Vasiliy Losev
and Margarita Karaseva

1 Reshetnev Siberian State University of Science and Technology, 31, Krasnoyarsky Rabochy Av., Krasnoyarsk,

660037, Russia

2Siberian Federal University, 79, Svobodny pr., Krasnoyarsk, 660041, Russia

ASEDU-III-1013

Numerical modeling of the stress-strain state of steel structures of building frames

Svetlana A. Sazonova, Alexey V. Kochegarov, Eduard A. Chernikov, Nikolay V. Mozgovoy, Nadezhda V. Akamsina, Dmitry V. Sysoev and Leonid V. Stenyukhin

Voronezh State Technical University; Voronezh State Technical University; Voronezh State Forestry University named after G. F. Morozov; Voronezh State Technical University; Voronezh State Technical University; Voronezh State Technical University; Voronezh State Technical University, Voronezh, Russia

ASEDU-III-1014

Methods of Improving The Quality and Reliability of Technological Machines and Aggregates by Restoring Parts and Assemblies

O. Kolenchukov, A. Mikhailov, Yu. Abramov,

Institute of Oil and Gas, Siberian Federal University, Krasnoyarsk, Russia

ASEDU-III-1015

Implementation of a Bioinspired Algorithm for the Formation of Multiversion Software Systems

I. V. Kovalev, D. I. Kovalev, A. A. Voroshilova, D. V.  Borovinsky and V. A. Podoplelova

Siberian Federal University, Krasnoyarsk, Russia 2
Krasnoyarsk State Agrarian University, Krasnoyarsk, Russia 3
Reshetnev Siberian State University of Science and Technologies, Krasnoyarsk, Russia 4
China Aviation Industry General Aircraft Zhejiang Institute Co., Ltd, China 5
Krasnoyarsk Science and Technology City Hall, Krasnoyarsk, Russia 6
Sochi State University, Sochi, Russia 7
FSBEE HE Siberian Fire and Rescue Academy EMERCOM of Russia, Zheleznogorsk, Russia

ASEDU-III-1016

Modeling of resources for potential fires at public facilities elimination

Svetlana A. Sazonova, Tatyana V. Zyazina, Marina L. Lapshina, Vasiliy A. Goryunov, Sofya N. Dyakonova, Dmitry V. Sysoev and Nadezhda V. Akamsina

Voronezh State Technical University; Voronezh State Pedagogical University; Voronezh State Forestry University named after G. F. Morozov; Voronezh State Pedagogical University; Voronezh State Technical University; Voronezh State Technical University; Voronezh State Technical University, Voronezh, Russia

ASEDU-III-1017

Investigation of the Modes of Heat Treatment of Parts Made of Heat-Resistant Alloys for the Degree of Removal of Residual Stresses

M.A. Oleynik, A. V. Balyakin

Samara University

ASEDU-III-1018

Reasons for the Failure of Screw Centrifuges and Technological Methods to Improve Their Reliability

Oleg Kolenchukov, Tatiana Kolenchukova, Elvin Musazade

Siberian Federal University, Institute of Oil and Gas, Krasnoyarsk, Russia

ASEDU-III-1019

Method for Producing Acid Corrosion Inhibitor

V. M. Ilyin, A. S. Bukanova, A.A. Islamutdinova, L. R. Asfandiyarova, E. K. Aminova and O. A. Petrova

Institute of chemical technology and engineereng Ufa State Petroleum Technological University, Sterlitamak, Russia; Atyrau oil and gas university, Atyrau, Kazakstan

ASEDU-III-1020

Possibility of electrochemical cleaning of saline soils in case of oil pollution

Nikolay S. Shulaev, Valeria V. Pryanichnikova, Ramil R. Kadyrov, Inna V. Ovsyannikova, Lilia R. Asfandiyarova

Ufa State Petroleum Technological University, Sterlitamak, Russia

ASEDU-III-1021

Influence of Technological Parameters of Processing of The Tumbling Machine on Quality of a Surface Layer

A.I.Khaimovich, E. P. Zlobin, E. S. Goncharov, A. V. Balaykin

Samara University, Samara, Russia

ASEDU-III-1022

The key aspects of the reconstruction old and building the new cities with Building Information Modeling

Subbotin A.S, Bimbiris V.V, Seyfullin R.S, Krapenko K.S

Moscow State University of Civil Engineering

ASEDU-III-1023

End user authorization solutions in modern microservice applications

Nikon Podgorny, Christina Alexandrova, Tatyana Kvist, Vladislav Sokolov

Petrozavodsk State University, Petrozavodsk, Russia

ASEDU-III-1024

High-Frequency Characteristics of a Jet Electrolyte-Plasma Discharge

Alexander I. Popov, Anatoly P. Veselovsky, Sergey V. Ermak, Sergey V. Zakharov, Marina V. Yakovitskaya, Mikhail M. Radkevich

Peter the Great Saint Petersburg Polytechnic University

ASEDU-III-1025

Catalyst for the Production of Butadiene from Ethanol

L.Z. Kasyanova, A.A. Islamutdinova, E.K. Aminova

Institute of Chemical Technologies and Engineering of the Federal State Budgetary Educational Institution "Ufa State Petroleum Technical University" in Sterlitamak, Steritamak, Russian Federation

ASEDU-III-1028

Preparation of pigment based on solid catalyst waste from the dehydrogenation process

Elmira Aminova, Liliya Kasyanova, Aigul Islamutdinova

Institute of Chemical Technologies and Engineering of the Federal State Budgetary Educational Institution "Ufa State Petroleum Technical University" in Sterlitamak, Steritamak, Russian Federation

ASEDU-III-1030

Neural network modeling of flow hydrodynamics in a column with packed elements

M.I.Kondrateva, V.V.Bronskaya, A.G.Mukhametzyanova, T.V.Ignashina, L.E.Khairullina,D.S.Balzamov

Kazan National Research Technological University, 68 Karl Marx Street, Kazan, 420015, Russian Federation; Kazan Federal University, 18 Kremlevskaya Street, Kazan, 420008, Russian Federation; Kazan State Power Engineering University, 51 Krasnoselskaya Street, Kazan, 420066, Russian Federation

ASEDU-III-1031

Defectoscopy of Honeycomb Blocks Using Computer Vision and Deep Learning Technologies

Alexander Razumovsky, Aleksey Kalashnikov, Evgeniy Talay and Angelina Petetskaya

Reshetnev Siberian State University of Science and Technology

ASEDU-III-1032

Development of the Design and Manufacturing Technology of Lightweight Ball Plugs for Aviation Equipment

E O Frolova, V A Lobov, M S Smakovsky, I V Vornacheva, R R Zagidullin, I K Kiyamov and L S Sabitov

Baltic State Technical University “Voenmeh”, Saint Petersburg, Russia JSC "Machine-building plant "Armalit", St. Petersburg, Russia South-West State University, Kursk, Russia Kazan Federal University, Kazan, Russia Kazan State Power Engineering University, Kazan, Russia

ASEDU-III-1033

Issues Of Application An Absorption Heat Pumps For Solar Heat And Cooling Supply Of Buildings

A.I. Anarbaev and M.A. Koroli

Tashkent State Technical University, Tashkent, Uzbekistan

ASEDU-III-1034

The Simulation of the Stress-Strain Track Structure
Condition on the Section of Variable Rigidity Made of Reinforced Concrete Boxes

Z. T. Fazilova

FGAOU VO «Russian University of Transport» (RUT MIIT), 125190, 22/2 Chasovaya str., Moscow, Russia

ASEDU-III-1035

Digital Twin of Production on the Assembly Line

Nikolai Shtabel, Alexander Razumovsky, Stepan Tkachev and Mikhail Saramud

1 Reshetnev Siberian State University of Science and Technology, 31, Krasnoyarsky Rabochy Av., Krasnoyarsk,

660037, Russia 2
Siberian Federal University, 79, Svobodny pr., Krasnoyarsk, 660041, Russia

ASEDU-III-1036

The Energy Equation of the Temperature Boundary Layer, Taking into Account the Heat Transfer of Volumetric Flows

Aleksandr Zuеv, Anna Аrngol, Ekaterina Falkova, Mikhail Tolstopyatov, Pavel Dubynin

Siberian State University of Science and Technology named after academician M. F. Reshetnev, JSC «Krasnoyarsk Machine-Building Plant», Krasnoyarsk

ASEDU-III-1037

Features of Designing Four-Quadrant Asynchronous
Electric Drives Based on a Signal Processor

O. Nuyya, A. Bushuev, Y. Litvinov, V. Boikov and M. Sergeantova

Saint Petersburg State University of Aerospace Instrumentation, Saint Petersburg, Russia
ITMO University, Saint Petersburg, Russia

 

Section 2. Natural science, environmental engineering and education


ASEDU-III-2001

Transformation of Grain Raw Materials

Ivan Kechkin, Vladimir Ermolaev, Mihail Ivanov

Russian Presidential Academy of National Economy and Public Administration, Vernadsky Avenue, 82, Moscow, 127434, Russian Federation

ASEDU-III-2002

Climatic Resources of Organic Farming in Siberia (from Wheat Data)

   

ASEDU-III-2003

Method for calculating air parameters during grain cooling in metal silos

Ivan Kechkin, Vladimir Ermolaev, Sergey Terekhov, Lidia Terekhova,Marina Yakovchenko

Russian Presidential Academy of National Economy and Public Administration, Vernadsky Avenue, 82, Moscow, 127434, Russian Federation

ASEDU-III-2004

Features of self-healing and self-cleaning capacity of oily soils

Guzel Khakimova, Liliya Asfandiyarova and Inna Ovsyannikova

Ufa State Petroleum Technological University

ASEDU-III-2005

Theoretical Study of the Ultrasonic Influence on the «Gas-Liquid» Interfacial Surface when Impacted Through a Gas Gap

A.R. Barsukov, S.N. Tsyganok, V.A. Shakura

Biysk Technological Institute (branch) of Altai State Technical University named after I.I. Polzunov

ASEDU-III-2006

Potential Volumes of Organic Produce Export from Siberia (Case Study of Grain)

   

ASEDU-III-2007

Influence of Potential Forces on the Efficiency of Ultrasonic Coagulation in Vortex Acoustic Flows

Roman N. Golykh, Roman S. Dorovskih, Denis S. Abramenko

Biysk Technological Institute (branch) of Altai State Technical University named after I.I. Polzunov

ASEDU-III-2008

Research on the efficiency of the timber industry

S.O. Medvedev, M.A. Zyryanov, T.G. Rjabova, D.N. Devyatlovskiy

Reshetnev Siberian State University of Science and Technology, Krasnoyarsk, Russia

ASEDU-III-2009

Analysis of the Portfolio of Marketable Products From Wood Biomass

M.A. Zyryanov, S.O. Medvedev, A.P. Mokhirev A.N. Zakiryanova

Reshetnev Siberian State University of Science and Technology; Siberian Federal University, Krasnoyarsk, Russian

 

Application Of Computer Technologies In The Study Of The Discipline "Engineering Graphics"

Rushana R. Anamova, Galina K. Khotina, Vera A. Shabunina

Moscow Aviation Institute (National Research University), Moscow, Russian Federation

ASEDU-III-2011

Introduction to the Theory of Stochastic Processes: Studying Time Series

E. Kuznetsova, N. Zhbanova, T. Fomina, F. Golovaneva, M. Karlova

Lipetsk State Technical University, Lipetsk State Technical University, Lipetsk State Pedagogical University named after P. P. Semenov-Tyan-Shansky, Lipetsk, Voronezh State University, Voronezh, Lipetsk State Pedagogical University named after P. P. Semenov-Tyan-Shansky, Lipetsk, Russia

ASEDU-III-2012

New Approaches to the Methodology for Assessing the Industry Multiplier in the Regional Economy

L. V. Evgrafova, N. A. Sergeeva and O. V. Takanova

1Russian State Agrarian University – Moscow Timiryazev Agricultural Academy

ASEDU-III-2013

Integrated Courses of Natural Science in High School as a Tool to Form High-Order Thinking

   

ASEDU-III-2014

Numerical simulation of the destruction of monomeric chains as a result of impact initiated by ultrasonic cavitation

R.N. Golykh

Biysk Technological Institute (branch) of Polzunov Altai State Technical University

ASEDU-III-2015

Investigation of the Modifying Microwave Effect on Polymer Materials

Aigul Islamutdinova, Liliya Kasyanova and Elmira Aminova

Institute of Chemical Technologies and Engineering of the Federal State Budgetary Educational Institution "Ufa State Petroleum Technical University" in Sterlitamak, Steritamak, Russian Federation

ASEDU-III-2016

Assessment of the ecological state of soils at the carbon polygon site of UNPP SOLUNI

I.V. Ovsyannikova, L.R. Asfandiyarova, G.V. Khakimova

Ufa State Petroleum Technological University

ASEDU-III-3001

Innovative Technologies For Assessing The Level Of Scientific Activity Of Engineering And Technical Personnel Of Industrial Engineering Companies

I. Skripnik, S. Voronin, D. Savelyev, T. Kaverzneva, N. Leonova, N. Rumyantseva and V. Balabanov

Saint Petersburg University of the State Fire Service of the Ministry of Emergency Situations of Russia, Saint Petersburg, Russia; St. Petersburg Polytechnic University of Peter the Great, Saint Petersburg, Russia

ASEDU-III-3002

Application of the Bioassay Method for the Selection of Phytoremediants

N. S. Shulaev, V. V. Pryanichnikova, I. V. Ovsyannikova, R. R. Kadyrov, G.

V. Khakimova, and L. R. Asfandiyarova

Ufa State Petroleum Technological University

ASEDU-III-3003

Constructive Geometric Modeling the Double Sided Moldboard Bodies for Bidirectional Rotary Plows

Tojiddin Juraev, Shavkat Imomov, Dilorom Ubaydullayeva, Tulkin Abdukarimov, Mukhriddin Fayzullayev

Bukhara Institute of Natural Resources Management of the National Research University of “TIIAME”; Bukhara Engineering Technological Institute

ASEDU-III-3004

Innovative Activity of Russia: Dynamics and Position in International Comparisons

T E Marinchenko, S A Voinash, V A Sokolova, R R Zagidullin, L S Sabitov and I K Kiyamov

Russian Research Institute of Information and Feasibility Study on Engineering Support of Agribusiness, the Federal State Budgetary Scientific Institution (Rosinformagrotekh FSBSI), Pravdinsky Township, Pushkinsky District, Moscow Region, Russia Kazan Federal University, Kazan, Russia Saint-Petersburg State University of Industrial Technologies and Design, Saint-Petersburg, Russia Kazan State Power Engineering University, Kazan, Russia

ASEDU-III-3005

Composite Building Materials from Agricultural Waste for House-Building in Seismic Hazardous Areas

S N Dolmatov, P G Kolesnikov, S A Voinash, A V Kamenchukov, R R Zagidullin, I K Kiyamov and L S Sabitov

Reshetnev Siberian State University of Science and Technology, Krasnoyarsk, Russia Kazan Federal University, Kazan, Russia Pacific National University, Khabarovsk, Russia Kazan State Power Engineering University, Kazan, Russia

ASEDU-III-3006

The use of artificial intelligence technologies in the organization of the educational process

L. V. Prosviryakova, K.A. Osipov, A.A. Dmitriev

Irkutsk National Research Technical University

ASEDU-III-3007

Method for using natural silk fibers for producing valuable grade paper

Khalimakhon Alimova, I.A. Bulanov, Khalima Umurzakova and Kuziboy Sobirov

1Tashkent Institute of Textile and Light Industry, Uzbekistan
2Urganch State University, Uzbekistan

ASEDU-III-3008

Causes and methods for determining the pilling ability of knitted fabrics depending on the fibrous composition

Shamsidin Tulanov, Jakhongir Ahmedov and Olga Prozorova

Tashkent Institute of Textile and Light Industry, Uzbekistan

ASEDU-III-3009

Comparative Efficiency of Territorial Logistics Based On Integration into Global International Supply Chains

A K Dolotbakova, V A Sokolova, S A Voinash, R R Zagidullin, L S Sabitov and I K Kiyamov

Kyrgyz State Technical University named after I.Razzakov, Bishkek, Republic of Kyrgyzstan Saint-Petersburg State University of Industrial Technologies and Design, Saint-Petersburg, Russia Kazan Federal University, Kazan, Russia Kazan State Power Engineering University, Kazan, Russia

 

Section 3. Digital transformations and computer technologies in science and education


ASEDU-III-4001

Digital Transformations in Higher Education System: BYOD Technologies and Modular Reverse Model of Educational Process Organization

Sergey Novikov and Andrey Sazonov

Moscow Aviation Institute (National Research University)

ASEDU-III-4002

Developing the Professional Competencies of a Physics Teacher in a Digital Learning Environment Based on the Psychological Theory of Activity

Irina A. Krutova, Galina P. Stefanova, Tatyana V. Kirillova and Lidia A. Proyanenkova

Astrakhan State University named after V.N. Tatishchev, Astrakhan; Moscow State Pedagogical University, Moscow, Russia

ASEDU-III-4003

Digitalization of education: problems and realities of digital culture development within the framework of new educational technologies

А.А. Sazonov, N.B. Zemlyanskaya, N.V. Kazakova

Moscow Aviation Institute (National Research University)

ASEDU-III-4004

Results of the Flipped Curriculum Resources Assessment for Additional Subject Preparation of Schoolchildren

Daria Barkhatova, Pavel Lomasko and Anna Simonova

Krasnoyarsk State Pedagogical University named after V.P. Astafyev, Krasnoyarsk, Russia

ASEDU-III-4005

Transformation of personalized educational trajectories of students of higher educational institutions in the context of the development of digital technologies

M. V. Sazonova, L. V. Mikhailova

Moscow Aviation Institute (National Research University), Moscow, Russia

ASEDU-III-4006

Software Environment for Creating Cognitive Learning Tools

Daria Barkhatova, Liudmila Khegay, Nikolay Pak and Kirill Narchuganov

Krasnoyarsk State Pedagogical University named after V.P.Astafyev, Krasnoyarsk, Russia
Siberian Federal University, Krasnoyarsk, Russia

ASEDU-III-4007

Linguadidactic provisions of IT Competence Development in FL Teachers

A. Yu. Alipichev, A. N. Kuznetsov, N. A. Sergeeva and A. N. Zakharova

Russian State Agrarian University – Moscow Timiryazev Agricultural Academy, Moscow; Institute of Education Management of the Russian Academy of Education, Moscow; Moscow Aviation Institute, Moscow

ASEDU-III-4008

Efficiency of Application of the Computer Algebra System in Studying the Method of Mathematical Induction

A A Olenev, K A Kirichek, E V Potekhina, N V Grivennaya, E M Petlina, O V Pelikh

Stavropol State Pedagogical Institute, North Caucasus Federal University, Stavropol, Russian Federation

ASEDU-III-4009

Practice-Oriented Modules in Physics and Informatics Teachers Training in Educational Technopark Environment

Elena Dudysheva and Nikolay Lopatkin

Shukshin Altai State University for Humanities and Pedagogy, Biysk, Russia

ASEDU-III-4010

Improvement of methods of mathematics teaching management in educational organizations of the Ministry of Emergency Situations of Russia in the context of the development of the digital educational environment

E.N. Trofimets

Saint-Petersburg university of State fire service of EMERCOM of Russia, Saint-Petersburg, Russia

ASEDU-III-4011

Differential method for forecasting labor resources based on correlation models

   

ASEDU-III-4012

Investigation of the signal passage through the Costas loop in the Labview program

K.A. Osipov, L. V. Prosviryakova, A. A. Dmitriev

Irkutsk National Research Technical University

ASEDU-III-4013

Conceptual Multidimensional Model for Flood Situation Analysis

A. V. Korobko, N. V. Benko, I. S. Erina

Reshetnev Siberian State University of Science and Technology 31, prospect “Krasnoyarsky rabochy“, Krasnoyarsk, 660037, Russia

ASEDU-III-5001

STEM-Education Used as a Foundation for a Learner’s Algorithmic Thinking Development

V. Vexler, G. Аzhymanbetova, A. Saipbekova, V. Maximov, T. Gorbunova, E. Alutina and R. Bazhenov

Saratov State University, Saratov, Russia; Kyrgyz National University named after Zhusup Balasagy, Bishkek; Osh State University, Osh, Kyrgyz Republic; North-Eastern Federal University, Yakutsk; Moscow State University of Civil Engineering, Moscow; Blagoveschensk State Pedagogical University, Blagoveschensk; Sholom-Aleichem Priamursky State University, Birobidzhan, Russia

ASEDU-III-5002

Technique for Improving the Visibility of Biological Tissues in Conditions of Massive Intraoperative Bleeding

A. V. Medievsky, A. G. Zotin, K. V. Simonov, T. V. Cherepanova and A. S. Kruglyakov

Krasnoyarsk State Medical University named after Prof. V.F. Voino-Yasenetsky; Reshetnev Siberian State University of Science and Technology; Institute of Computational Modelling of the SB RAS, Krasnoyarsk, Russia;

ASEDU-III-5003

The Perspectives of Learning the Apache Hadoop Big Data Analysis Ecosystem in Universities. Developing Practical Guidance

Anna B. Ostapenko, Alina V. Murina, Irina F. Umanets, Natalia V. Barsukova and Natalia N. Didukh

Pacific National University, Khabarovsk, Russia

ASEDU-III-5004

Digital Transformations in Education: Augmented Reality in the Classroom

Maria V. Arkhipova, Natalia V. Shutova, Olga A. Orlova, Oksana R. Zhernovaya, Yulia N. Zintsova and Irina M. Udalova

Minin Nizhny Novgorod State Pedagogical University, Nizhny Novgorod, Russia ; Lobachevsky National Research Nizhny Novgorod State University, Nizhny Novgorod, Russia ; St Petersburg University, Saint Petersburg, Russia ; Linguistics University of Nizhny Novgorod

ASEDU-III-5005

Model of Open Information Education of University Students in the Field of Physical Education

M. Katrenko, Y. Zhuravleva, A. Ageev, O. Kukhtareva, O. Desenko, I. Ivanova

FGAOU VO North-Caucasian Federal University, Stavropol, Russia; Pyatigorsk Medical and Pharmaceutical Institute-a branch of FGBOU Volgograd State Medical University of the MoHRF, Pyatigorsk, Russia; GBOU VO Stavropol State Pedagogical Institute, Stavropol, Russia; Branch of the Federal State Budgetary Educational Institution of Higher Education "Russian University of Economics named after G.V. Plekhanov", Pyatigorsk, Russia; FGBOU VO Kuban State Medical University of the Ministry of Health of Russia, Krasnodar, Russia North Caucasian Institute-branch of the Federal State Budgetary Educational Institution of Higher Education "Russian Academy of National Economy and Public Administration under the President of the Russian Federation", Pyatigorsk, Russia

ASEDU-III-5006

VR/AR Technologies in Teaching Descriptive Geometry

Rushana R. Anamova, Anton V. Dubrovin

Moscow Aviation Institute (National Research University), Moscow, Russian Federation

ASEDU-III-5007

Educational Gamification in Second Language Acquisition

Maria V. Arkhipova, Ekaterina E. Belova, Elena V. Zhulina, Yulia A. Gavrikova, Daria S. Bruzgina, Anna N. Petrova and Ekaterina A. Patrusheva

Minin Nizhny Novgorod State Pedagogical University, Nizhny Novgorod, Russia

ASEDU-III-9001

Cyber-physical environment control based on the artificial intelligence

Anatoly V. Shukalov, Danil A. Zakoldaev, Igor O. Zharinov and

Oleg O. Zharinov

ITMO University

ASEDU-III-9002

Fundamental Dependencies for Requirements Compliance Conditions of a Unique System under Limited Amount of Testing

Ya. N. Gusenitsa

FSAI MIT, Krasnodar Territory, Anapa, Pionersky pr., 41, 353456, Russian Federation

ASEDU-III-9003

Intelligent control in a safety cyber-physical environment

Andrey V. Gurjanov, Valery I. Babenkov, Igor O. Zharinov and Oleg O. Zharinov

ITMO University

 

Section 4. Computational modelling and innovation technologies


ASEDU-III-7001

Correlation of the structure of nickel-based electrochemical systems with hydrogen accumulation

A V Zvyagintseva

Department of Chemistry and Chemical Technology, Voronezh State Technical University, 84 October 20th Anniversary Street, Voronezh, 394006, Russia

ASEDU-III-7002

Modern Methods of Selecting the Process of Restoring the

Operability of Parts During the Repair of Machines

Oleg Leonov, Nina Shkaruba, Yulia Vergazova and Pavel Golinitskiy

Russian State Agrarian University – Moscow Timiryazev Agricultural Academy, Moscow, Russia

ASEDU-III-7003

Development of a Software Module for Calculating the

Shortest Path Problem Implemented by the Bellman-Ford

Algorithm

Mariia Maslova, Anna Mordvinova and Emine Khalilaeva

Sevastopol State University

ASEDU-III-7004

Modeling and Optimization in Internet of Things Systems on the Base of Combined Approach

Igor Lvovich, Yakov Lvovich, Andrey Preobrazhenskiy and Yuriy Preobrazhenskiy

Voronezh institute of high technologies, Voronezh state technical university

ASEDU-III-7005

Development of the Algorithm for Optimizing the Testing Process of a Software Product at the Development Stages

T. E. Smolentseva and I. A. Akatev

 

MIREA – Russian Technological University, 78, Vernadsky pr., Moscow, 119454, Russia

ASEDU-III-7006

Development of Decision Making Support Controller for Automated Control System of Mechatronics Complex

A. N. Losev, A. L. Zolkin, I. M. Kalyakina, A. N. Fomichev and V. A. Mironchuk

Russian State Agrarian University - Moscow Timiryazev Agricultural

 

Academy, Moscow, 127550, Russia

ASEDU-III-7007

Physico-Chemical Characteristics of the Turbulent Flame of Gas Diesel
 

O P Lopatin

Chuvash State Agrarian University, Cheboksary, Russian Federation, Vyatka State Agrotechnological University, Kirov, Russian Federation

ASEDU-III-7008

Modeling of Physico-Chemical Processes in the Combustion Chamber of Gas Diesel

O P Lopatin

Chuvash State Agrarian University, Cheboksary, Russian Federation, Vyatka State Agrotechnological University, Kirov, Russian Federation

ASEDU-III-7009

Stabilization of Streaming Phenomena of Network-Like Processes of Transportation of Continuous Media in a Continuous Time Mode

L. N. Borisoglebskaya, A. A. Fedotov, A. S. Gunkina, S. Yu. Novakova, O. Ja. Kravets and Yu. V. Redkin

Orel State university, Air Force Academy named after professor N.E. Zhukovsky and Y.A. Gagarin, Voronezh State Technical University

ASEDU-III-7010

Calculation of the Level of Standardization and Unification in the Production of Gearboxes for Conveyor Drives

G. N. Temasova, O. A. Leonov, N. Zh. Shkaruba and Yu. G. Vergazova

Russian State Agrarian University – Moscow Timiryazev Agricultural Academy, Moscow, Russia

ASEDU-III-7011

Physicochemical and Temperature Measurement Methods for Ensuring Quality Control of Fermented Milk Drinks

G. Temasova, E. Cherkasova, P. Golinitskiy, U. Antonova and S. Toygambaev

Russian State Agrarian University - Moscow Timiryazev Agricultural Academy, Moscow, Russia

ASEDU-III-7012

Investigation of the influence of load cell diameter on mass measurement error

O. A. Leonov  and N. Zh. Shkaruba

Russian State Agrarian University − Moscow

 

Timiryazev Agricultural Academy

ASEDU-III-7013

Analysis and Preparation of a Data Set on Energy Consumption of Buildings in Machine Learning Models

P. Yu. Gusev, M. Yu. Chizhov, A. D. Danilov, K. Yu. Gusev, O. V. Sobenina and A. I. Kustov

Voronezh State Technical University,

ASEDU-III-7014

Preparing and analyzing data to assess equipment condition using Machine Learning

D. V. Kolesnikova and R. A. Iureva

ITMO University

ASEDU-III-7015

Metrics monitoring system of the educational process on the basis of e-learning

P. A. Mitroshin and M. A. Belov

Dmitrov Institute of Continuing Education branch of Dubna State University, 23, mikrorayon DZFS, Dmitrov,

Moscow Region, Russia

Dubna State University, Dubna, Universitetskaya, 19, Moscow Region, Russia

ASEDU-III-7016

Metrological use of spectral validation for environmental monitoring and their benefits in the regions of Uzbekistan

Kakhramon R. Ruzmatov

Department of Metrology, standardization and certification, Tashkent state technical university, university str. 2,Tashkent city, 100095, Uzbekistan

ASEDU-III-7017

Dynamic Programming Approach to The Problem of Resources Allocation Between Innovative Technologies

Oleg Malafeyev, Shirin AL Manai, Irina Zaitseva, Dmitry Shlaev, Anna Dolgopolova and Dmitry Kolesov

Saint Petersburg State University, Universitetskaya naberezhnaya, d. 7/9, 199034, Russia

Russian State Hydrometeorological University, 79, Voronezhskaya Street, Saint Petersburg, 192007, Russia

Stavropol State Agrarian University, Zootekhnichesky Lane, 12, Stavropol, 355017, Russia

ASEDU-III-7018

Principles of organizing a hardware of information collection system perceptron for a quantum hashing problem

V. D. Munister, A. L. Zolkin and A. I. Dzhangarov

Department of mathematical methods and system analysis, Mariupol State University, Prospect Builders, 129 a, Mariupol, 87500, Ukraine

Computer and Information Sciences Department, Povolzhskiy State University of Telecommunications and Informatics, Samara, 443010, Russia

Department of Programming and Information and Communication, Kadyrov Chechen State University, 32,

Sheripova Street, Groznyy, 364093, Russia

ASEDU-III-7019

Preventing Contact Corrosion of Carbon Steel Welded Joints

А. S. Tyusenkov, D. E. Bugai and M. Z. Zaripov

Ufa State Petroleum Technological University, Ufa, Russia

ASEDU-III-7021

Trends in improving the quality of tests modern medical equipment

Irina Zaytseva and Tatyana Setrakova

Don State Technical University, Gagarin sqr, 1, Rostov-on-Don, 344002, Russian Federation

ASEDU-III-7022

Analysis of emissions of pollutants into the atmosphere for the facilities of Tengizchevroil LLP in Atyrau region

M. S. Yessenamanova, A. Anuarbekova, D. Ryskalieva, A. Kamelov and N. Tauova

Kh.Dosmukhamedov Atyrau University, Student Avenue 1, Atyrau, Republic of Kazakhstan

Sh.Yessenov Caspian University of Technology and Engineering, Aktau, Republic of Kazakhstan

ASEDU-III-7023

BER analytical expression for two-user PD-NOMA with square QAM by polynomial approximation

Ya V Kryukov, D A Pokamestov and E V Rogozhnikov

Tomsk State University of Control Systems and Radioelectronics, Tomks, Russia

ASEDU-III-7024

Analysis and improvement of the method for constructing a functional dependence used in testing instruments for measuring neutron flux density as part of systems for monitoring the parameters of reactor installations to determine their metrological characteristics

R. M. Shibaev

Federal State Unitary Enterprise All-Russian Research Institute of Physical, Technical and Radio Engineering Measurements Moscow, Russia

ASEDU-III-7025

The results of research on the improvement of the working bodies of the cotton raw cleaning machine

Anvar Djuraev, Sardor Sayitkulov, Khakimboy Rakhimov, Nafisa Turaeva and Matluba Hamroeva

Tashkent Institute of Textile and Light Industry, Tashkent, Uzbekistan

Bukhara Engineering Technological Institute, Bukhara, Uzbekistan

ASEDU-III-7026

Natural oscillations of three-layered viscoelastic flat spherical shells

M. Sh. Аkhmedov, Zh. Namozov, B. Eshpulatov, B. B. Negmatullayev and F. B. Jalolov

Bukhara Engineering Technological Institute, Bukhara, Uzbekistan

Tashkent Chemical Technological Institute, Tashkent, Uzbekistan

Navoi State Mining Institute, Navoi, Uzbekistan

Bukhara branch of the Tashkent Institute of Irrigation and Mechanization Engineering in Agricultural, Bukhara,

Uzbekistan

ASEDU-III-7027

Long-term strength of non-autoclaved cellular concretes

Jamol Urinov, Ulugbek Mirzaev and Akmal Sharipov

Bukhara Engineering Technological Institute, Bukhara, Uzbekistan

ASEDU-III-7028

Substantiated parameters of multifaceted grates in the coarse cleaning zones of a cotton gin

Anvar Djuraev, Sardor Sayitkulov, Javlon Kholmirzaev, Bakhtiyor

Haydarov and Nematjon Mustafaev

Tashkent institute of Textile and Light Industry, Tashkent, Uzbekistan

Bukhara Engineering Technological Institute, Bukhara, Uzbekistan

Namangan Engineering Construction Institute, Namangan, Uzbekistan

ASEDU-III-7029

Analysis of impact of the tension force of needle thread on the shift of the axis of cushioning bush of the composite roller of thread guide in sewing machine

G. Tursunova and A. Djuraev

Bukhara Engineering Technological Institute, Bukhara, Uzbekistan

Tashkent institute of Textile and Light Industry, Tashkent, Uzbekistan

ASEDU-III-7030

Use of Bukhara city sweat water in irrigation of corn (silos) in the conditions of alluvial soils of Bukhara region

Zarina Hakimova and Ismoil Islamov

Bukhara branch of the Tashkent Institute of Irrigation and Agricultural Mechanization Engineers, Bukhara,

Uzbekistan

 

Section 5. Industrial physics, mechanics and energy


ASEDU-III-6009

Innovation process analysis of the modern ZinserSpeed 5A roving machine with the unique E3 concept for sustainable textile production

Farxot Kazakov, Rashit Nurboev and Olima Aripova

Bukhara Engineering Technological Institute, Bukhara, Uzbekistan

ASEDU-III-6010

Designing resource-saving mechanisms for stable operation of the loop-forming system of stitch-knit machines

Akramjon Muradov and Dilmurod Rakhimberdiev

Namangan Engineering Technological Institute, Namangan, Uzbekistan

ASEDU-III-8002

Selection the optimal structure and hygienic parameters of a package of materials for special clothing

Nargiza Gaybullaeva and Sabokhat Pulatova

Uzbekistan

ASEDU-III-8004

Energy saving by ensuring steady operation of asynchronous motor of fodder grinding devices in static and dynamic modes

Nurali B. Pirmatov and Abdullo T. Panoev

Uzbekistan

ASEDU-III-8005

Calculation of damage from discharges on example of ferroalloy plant

V V Kuleshov, A L Zolkin, Yu N Koval, O V Saradzheva and S V Shamina

FSBEI HE Omsk State Technical University, Omsk; Povolzhskiy State University of Telecommunications and Informatics, Samara; FSBEI HE Siberian Fire and Rescue Academy EMERCOM of Russia, Zheleznogorsk, Krasnoyarsk Krai; A.N. Kosygin Russian State University, Moscow; South Ural state agrarian University, Troitsk, Chelyabinsk region, Russia

ASEDU-III-8006

An approach to building an intermediate storage of statistical data on the operation of technological equipment at industrial enterprises in the development of machine data collection systems

P. A. Nikishechkin and A. N. Nikich

Computer Control Systems Department, MSUT «STANKIN», Moscow, Russia

ASEDU-III-8007

Assessment of the complexity levels of geometric models of the agricultural machines' working bodies

Tojiddin Juraev, Shavkat Imomov, Dilorom Ubaydullayeva,

Rustam Xujakulov and Yunus Ahmedov

Uzbekistan

ASEDU-III-8009

Slow Released Fertilizer production using a multistage chemical reactor for continuous liquid mixing.

I. Bamatov, D. Bamatov and M. Arsanov

V.V. Dokuchaev Soil Science Institute, Department of agro-ecological estimation of soils and designing of agro-landscapes, 7, Pyzhevsky lane, Moscow, 119017, Russia

Chechen State University named after A. A. Kadyrov, Grozny, Russia

ASEDU-III-8010

Algorithmic support of the integrated aircraft control system using the systems embedding technology

T. A. Gulay, V. V. Zakharov, R. V. Kron, S. V. Popova and V. P. Shibaev

Stavropol State Agrarian University

ASEDU-III-8011

Web-portal development for rating weather fire hazards provided by weather services

V. Glagolev, G. Kuldysheva, A. Zhunusakunova, R. Bazhenov and S. Bedrina

Russia

ASEDU-III-8012

Methods for determining the resources needed to create MapReduce computational models

Tokhir Urazmatov, Khudaysukur Kuzibaev, Khurmatbek Otamuratov and

Azizbek Gulomov

Information Technology department Urgench branch of Tashkent University of Information Technologies named

after Muhammad al-Khwarizmi, Urgench, Uzbekistan

ASEDU-III-8013

Mathematical model of speech signal propagation under ideal conditions

Yu. Yu. Goncharenko, I. N. Kartsan and A. O. Zhukov

Russia

ASEDU-III-8014

The concept of complexity and nanoscience

B. L. Oksengendler, A. Kh. Ashirmetov, N. N. Turaeva, Z. I. Karimov,

F. A. Iskandarova, Sh. Z. Karimov, M. O. Olimjonova, L. Y. Akopyan and

O. Galkina

Uzbekistan

ASEDU-III-8015

Simulation of charge accumulation in warm thunderstorms taking into account the fractality of the cloud environment

T. S. Kumykov

Institute of Applied Mathematics and Automation KBSC RAS, Nalchik, Russian Federation

ASEDU-III-8016

Computational analysis of the influence of Internet traffic flows in IP networks

Ya. A. Sokolov, A. V. Pugach, N. A. Baykalova, K. E. Gaipov, I. O. Knyazeva,

D. E. Patsel and D. R. Lukevich

Reshetnev Siberian State University of Science and Technology, 31, Krasnoyarsky Rabochy Av., Krasnoyarsk,

660037, Russian Federation

ASEDU-III-8017

Development of information transmission structure based on visible communication

Sanjar Iskandarov, Fazliddin Jumaniyazov, Tokhir Urazmatov and

Khudayshukur Kuzibaev

Information Technology department, Urgench branch of Tashkent University of Information Technologies named

after Muhammad al-Khwarizmi, Urgench, Uzbekistan

ASEDU-III-8018

Creation of a mathematical model of computer-aided design of patterns and ornaments for gold embroidery

Vazira Ubaydova, Madina Azimova and Sitora Khudoyberdieva

Bukhara Engineering Technological Institute, Bukhara, Uzbekistan

ASEDU-III-8019

Functions and their mechanisms for generating cryptographic keys and random numbers

Mirkhon Nurullaev

Bukhara Engineering Technological Institute, Bukhara, Uzbekistan

ASEDU-III-8020

Influence of the parameters of the bobbin on the friction between the unwinding thread and the plastic sticks of the rubber bushing in the sewing machine

M. A. Mansurova, Z. S. Vafaeva, and J. B. Matyaqubova

Uzbekistan

ASEDU-III-8021

Leather obtained on the basis of fuzel oil and crude fatty acids of cotton soapstock - a fattening agent for fatliquoring leather

Makhbuba Shamsieva and Khilola Makhammadieva

Uzbekistan

ASEDU-III-8022

Methods for obtaining chitin and using chitosan as an intensifier for dying and printing of blended fabrics with water-soluble dyes

Gulnora Ikhtiyarova, Akhtam Khaydarov and Alisher Gafforov

Uzbekistan

ASEDU-III-8023

Reinforcement of buildings of general educational institutions in seismic conditions of Bukhara region

M. M. Vakhitov and G. G. Yadgarova

Bukhara Engineering Technological Institute, Bukhara, Uzbekistan

ASEDU-III-8024

A new glue composition with bactericidal properties used in the preparation of corrugated cardboard products

Ulbosin Eshbaeva, Akbarjon Nishanov and Anvar Djalilov

Uzbekistan

ASEDU-III-8025

Analysis of the impact action of a polygonal grate with a twisted surface on a fibrous seed in a cotton gin

U. T. Berdimurodov

Termez Institute of Engineering and Technology, Termez, Uzbekistan

ASEDU-III-8026

Parameters of the ripper-mole knife

F. M. Mamatov, Y. Rajabov, I. G. Temirov and D. Sh. Chuyanov

Uzbekistan

ASEDU-III-8027

The criterion for cleaning alfalfa seeds from mustard grass using the marginal charge method

Ashirbay Yusubaliev and Sherzod Sharipov

Uzbekistan

ASEDU-III-8028

Study of the dependence of the surface shape woodcarving from its flat contour of support

Uktam Yadgarov, Shohida Avlyakulova and Rukhsora Mukhamedova

Bukhara Engineering Technological Institute, Bukhara, Uzbekistan

ASEDU-III-8029

Technology for producing higher fatty alcohols based on paraffin hydrocarbons and their effect on the lubrication properties of diesel fuel

H. S. Fozilov, S. M. Turabdjanov, B. A. Mavlonov, S. F. Fozilov,

B. Z. Sharipov and A. A. Majidov

Uzbekistan

ASEDU-III-8030

Significance of using a screw cleaner at pretreatment of wool

F. B. Ismoyilov, E. I. Kuldashev, N. N. Sattarova and R. R. Bozorov

Bukhara Engineering Technological Institute, Bukhara, Uzbekistan

ASEDU-III-8031

Spectroscopy of the association of molecules of flavonoid derivatives

Guzal Kasimova, Salih Astanov, Anzura Mukhamedova and Lola Zhuraeva

Bukhara Engineering Technological Institute, Bukhara, Uzbekistan

ASEDU-III-8032

Finding ways to extend the life of saws in saws type 4DP-130

Fazliddin Kurbonov, Inomjon Raxmonov and Nodira Mirzakulova

Bukhara Engineering Technological Institute, Bukhara, Uzbekistan

ASEDU-III-8033

Determining discrete energetic states in a ligated silicon structure using a mathematical model

Jahongir Mamadaliev, Muslim Turgunov, Nurmirza Toshmamatov, Dilmurod Askarov and Nurmirza Abdukhalilov

Namangan Engineering Technological Institute, Namangan, Uzbekistan

ASEDU-III-8034

On the dynamic properties of non-equilibrium charge carriers in silica water

Khurmatillo Izzatillaev, Rayimjon Aliyev, Maxmudjon Qaxxarov,

Dilshodbek Jurahanov and Maksud Shamsiddinov

Uzbekistan

ASEDU-III-8035

Residual moisture content in leather

K. K. Turgunov, E. S. Buriev and N. U. Annaev

Tashkent Institute of Architecture and Civil Engineering, Navoi Street, 13, Tashkent, 100011, Uzbekistan

ASEDU-III-8036

Sliding parameters of a two-roll module for leather pressing

K. K. Turgunov, K. Yu. Aliboev and A. Rasulev

Tashkent Institute of Architecture and Civil Engineering, Navoi Street, 13, Tashkent, Uzbekistan

ASEDU-III-8037

Contact angles with a free upper roll of roll machines

N. U. Annaev, E. S. Buriev, B. A. Abdurakhmonov and B. A. Abdurakhmanov

Uzbekistan

ASEDU-III-8038

Modeling of contact interaction in a two-roll module

F. S. Khalturaev, F. Z. Kurbanova and Sh. I. Khurramov

Uzbekistan

ASEDU-III-8039

Estimation of capture in essentially asymmetric rolling

F. S. Khalturaev, F. Z. Kurbanova and Sh. I. Khurramov

Uzbekistan

ASEDU-III-8001

Experimental, analytical and numerical simulation of an open explosion

K.E. Savelova, A.A. Yatsenko, A.S. Kapralova

Baltic State Technical University "VOENMEH"

ASEDU-III-8040

Analysis of Modern Numerical Methods for Designing Thin-Film Interference Coatings

Yuliana A. Novikovaa), Georgy V. Tereshchenkob) and Maxim B. Ryzhikovc)

Saint Petersburg State University of Aerospace Instrumentation, 67, Bolshaya Morskaya str., Saint-Petersburg, 190000, Russia

ASEDU-III-8041

Kinematic analysis of the driven links 5R Bennett, simple mechanism

M R Faizov , F F Khabibullin , A V Tazhibaeva, R T Islamov and T A Mustafaev

Federal State Budgetary Educational Institution of Higher Education «Kazan National Research Technical University named after A.N. Tupolev–KAI»

ASEDU-III-8042

Kinematic analysis of the driven links 5R Bennett, multi-mode mechanism

M R Faizov , F F Khabibullin , A V Tazhibaeva, R T Islamov and T A Mustafaev

Federal State Budgetary Educational Institution of Higher Education «Kazan National Research Technical University named after A.N. Tupolev–KAI»

ASEDU-III-8043

Metrological requirements of international standard ISO/IEC 17025:2017 and experimental study questions on metrological traceability of measurement results

SH.M.Masharipov M.A.Mavlyanov, I.B.Abdumajidov

Tashkent State Technical University named after Islam Karimov, Tashkent city, 100095, University str., State enterprise “Uzbek national institute of metrology”, Agency “Uzstandart”, Address: 333 “A” Farabi str., Tashkent, 100049

ASEDU-III-8044

Nonlinear Transformations of Video Elements in the

Morphing Applications for Event Projects

Alexander V. Blinnikov, Igor V. Kovalev, Anna A. Voroshilova and Dmitry V. Borovinsky

Krasnoyarsk, Russia

 

Feedback