CAMSTech-III 2022, CAMSTech-IV 2024: Advances in Materials, Systems and Technologies

Conference Materials


IV International Conference

CAMSTech-IV 2024: Advances in Materials, Systems and Technologies

Conference Materials

About the Conference


Website

The IV International Conference on Advances in Materials, Earth Science and Technology, (CAMSTech-IV 2024) was organized by the Bukhara Engineering Technological Institute (Uzbekistan). In 2024 the conference took place in Bukhara from October 29 to 31, 2024. The conference was co-organized with the support of the partners, including the Namangan Engineering Technological Institute (Uzbekistan), Osh Technological University named after M. M. Adyshev (Kyrgyzstan), Karaganda Technical University (Kazakhstan), Technological University of Tajikistan (Tajikistan), Management and Science University (Malaysia), ITM University Gwalior (India), and Ankara University (Turkey).

The international scope of the conference was confirmed by the participation of representatives from universities and research centers of several foreign countries, including Uzbekistan, Malaysia, Kazakhstan, Kyrgyzstan, Iraq, Belarus, Vietnam, Russia, and the Czech Republic. More than 350 applications were submitted for participation in the event.

The primary objective of CAMSTech-IV 2024 was to provide an international platform for scientists and specialists from universities, academic institutions, enterprises, and research centers worldwide to share best practices, discuss current challenges, and explore development prospects in materials science, energy, geosciences, cybernetics, mathematics, and related fields. The conference also aimed to address social, economic, and environmental issues associated with sustainable development and the integration of smart technologies in agriculture.

Proceedings of CAMSTech-IV-2024 are sent for publishing to AIP Conference Proceedings.

Proceedings of CAMSTech-III-2022 are published in AIP Conference Proceedings, vol 3021, indexed in Scopus.

Proceedings of CAMSTech-II-2021 are published in AIP Conference Proceedings - Volume 2467 (indexed in Scopus).

Proceedings of CAMSTech-I-2020 are published in IOP Conference Series: Materials Science and Engineering - Volume 919 (indexed in Scopus).

Conference Programme


Presentations of the participants


Papers and reports


  • Use of a NIR Camera and Laser-Based Illumination to Improve the Visibility of Blood Vessels in a Surgical Wound During Massive Bleeding
  • Life Cycle Model of the Production and Logistics System of a Machine-Building Enterprise
  • Applying the CI/CD Practices to Mobile Product Development
  • The Impact of the Level of Digital Development on the Competitiveness of the Integrator Company
  • Calculation Method of Hydraulic Operation of Trailer Unlouding Device
  • Simulation of a High-Pressure Heat Accumulator Housing Made of Dispersed Reinforced Concrete by Means of Computer Engineering
  • Improvement of Vibration Protection of Operators of Road Construction Machinery
  • Application of BIM Technology in the Design of Maintenance Stations
  • Evaluation of the Efficiency of the Electric Power Storage Device in Traction Power Supply When Controlling the Load Level
  • To the Substantiation of the Design and Technological Scheme of Two Flow Fuses to Protect the Milling Drum of Forestry Machines From Overload
  • Modeling of Deformation of Heavy Reinforced Cement for Conical Parts of a High-Pressure Housing
  • Automation of Managerial Decision-Making in Innovative Activity of Industrial Enterprises on the Basis of Complex Assessment
  • Linear Сombination of AR(1), MA(q) Models With Minimal Forecast Variance
  • Overview of Technical Solutions for Devices for Cleaning and Disinfecting Surfaces
  • Automated Measurements of Electrical Conductivity of Thin Metal Films Using Modern Eddy Current Methods
  • Research of Downtime of Urban Passenger Transport Waiting for Additional Passengers at Stop Points
  • Saving Technologies for Operating Power Plants
  • Criteria for the Effectiveness of Technological Operating Modes Units as Part of Human-Machine Systems
  • Electric Pulse Technology as an Energy-Efficient and Economically Feasible Method of Rock Destruction
  • Influence of Variable Stiffness Section Design Parameters on the Track Operational Characteristics
  • Development of an Intelligent Control System for a Racing Car on a Complex Shape Track
  • Mathematical Description of Abrasive Tool Models
  • Method of Balancing a Rotational Shaft for Grain Grinding
  • Exploring Material Characteristics of Shafts in Rotary Milling Machines
  • Study on the Oscillations of the Euler-Bernoulli Beam on an Elastic Base
  • Introduction of Bodies of Rotation Into a Half-Space in a State of Complete Plasticity
  • Calculation Method for Underground Special Structures Under Natural Vibrations and Dynamic Influences
  • Thermal Stress-Strain State of a Partially Thermally Insulated and Clamped Rod in the Presence of Local Temperature and Heat Transfer
  • Development and Research of Reclamation Ripper Volumetric Type for Deep Loosening of Heavy Soils
  • Modernization of PLC Program for a CNC Turn Machine for Bringing the Production Automation Tools Into Use
  • Experience in Improving the Technology of Uranium Processing From Technological Solutions of In-situ Leaching
  • Advanced Process Control of the Gas Compressor at Oil-Producing Enterprises
  • Study of the Influence of Main Factors on the Mass and Density of Saw Fiber Separator Raw Material
  • Improvement of Instrumental Neutron Activation Technique of Elemental Composition Analysis
  • Development of Mathematical Models, Numerical Algorithms and Software for Monitoring and Forecasting the Processes of Heat Transfer and Moisture Loss During the Storage of Grain and Cereals
  • Mathematical Modeling of the Pastilla Jam Drying Process
  • Evaluation of the Mineral Extracted Volume in Open Pit Mines in the Holguín Area of the Republic of Cuba
  • Application of Polymer Gears in Agricultural Machinery
  • Program and Methods of Experimental Studies of the Drive Seed-Removing Pipe
  • Features of Reverse Engineering Technology
  • Analysis of the Effectiveness of Using Solar Panels in the Baltic Region
  • Implementation of the Arduino Microcontroller for Detecting Technological Faults in the Pipeline
  • Mathematical Modeling and Research of High Capacity Lead-acid Stabilized Accumulator Battery
  • Using an Arduino Microcontroller for Inspection and Analysis of Workshop Operation
  • Robotics Method for a Passenger Car Body Assembly Production Site
  • Efficiency of Processing Soft Hardwood for Housing Construction
  • Increasing The Durability of Combine Harvester Knives Using Hardening Boride Coatings
  • Acceleration of the Continuous Drying Process in a Convective Dryer with a Self-Rotating Plate
  • Determining The Components of Local Industrial Waste and Recycling Them Into Liquid Complex Fertilizers
  • Justification of Milling Cutter Parameters for Soil Processing and Plant Residue Grinding
  • Determination of the Parameters of the Working Members of the Straw Clipper Used in Agriculture
  • Analysis of the Braking Path of Cars Equipped With ABS in Different Environments
  • Increasing the Efficiency Fluid Extraction From Raw Hides by Pressing
  • Improvement of the Exploitation Performance of Light Vehicle Internal Combustion Engines by Addition of Hydrogen Fuel
  • To the Theory of Multi-photon Interband Linear-Circular Dichrosim in Monoatomic Layers of Dichalcogenide Metals
  • Mathematical Modeling of the Influence of the Gating System on the Quality of the Cast Product During Alloy Casting
  • Determination of Technological Parameters of Peno-Concrete Based on Local Materials
  • Assessment of the Electric Drive Wear Based on the Analysis of Current and Voltage Harmonic Parameters
  • Theoretical Analysis of Multi-Photon Interband Optical Transitions in Monoatomic Layers of Dichalcogenide Metals
  • Dynamic Characteristics of Radial Actively Lubricated Bearings with Semi-Active Control
  • Comparative Analysis of Volumetric Precision Models of Multi-Axis Machines
  • Free Vibrations of a Spherical Shell With a Pinched Edge
  • Digital Technologies in the Oil and Gas Complex
  • Соmplеtе Fасtоr Еxpеrimеnts оf Gеаr-Lеvеr Diffеrеntiаl Trаnsmissiоn Mесhаnism With Mоvаblе Аxеs
  • Classification and Processing Requirements for Equipment
  • Discrete Random Variables and Their Numerical Characteristics in the Problem of Mastering Information Theory and Reliability
  • Method for Producing Anti-Corrosion Paint Based on Nanostructured Polyvinyl Varnish
  • The Results of Experimental Studies on Noise Protection of Vibration Damping Thin-Walled Metal Structures With Discrete Rubber Inserts
  • Finding the Optimal Number of Quasi-Layers When Calculating the Ore Flotation Process
  • Influence of Soil Type on the Detection of Oil Spills in the Near Infrared Range
  • Physico-Mathematical Model for Water Desalination in a Combined Water Treatment System
  • Interval Model of a Vibration System for an Automobile Suspension
  • Methodology for Calculating Technical and Economic Indicators of Ore Deposit Development Systems at Great Depth
  • Obtaining an Object Model in the Development of Predictive Control Systems
  • Mathematical Planning of the Process of Dyeing Knitted Fabric With Natural Dyes
  • Multi-Criteria Optimization - Multi-Objective, Closing Link: SIMUS METHOD. Case study: Wind energy Parks Province of Holguín - Cuba
  • Systems Advanced Control of a Non-Stationary Object With Prognostic Models
  • Definitions of Influential Aspects of Technical Characteristics of Preventive Footwear for Diabetes Mellitus
  • Modeling Of Deforming Treatment of Wood Composites at Their Gluing
  • Matrix of Strategic Analysis of Enterprise Readiness Levels for Inclusion Into an Industrial Cluster
  • Influence of Constant Load Speed on the Response of a Viscoelastic Multilayer Plate Lying on a Deformable Base
  • The Behavior of Uranium in the System: Ore Clay - Barren Clay - Ore Sand
  • Application Of Energy Recovery Mechanism in Mining Equipment
  • Restoration Passport of a Metal Object in the Context of Professional Ethics
  • Method of Active Heating of Electrolytic Capacitors Used in the Arctic
  • Electromagnetic Sensor for Monitoring Truck Axle Load
  • Assessment of the Performance of Through-The-Earth Alerts Systems for Mines in the Arctic Region
  • Research of SCADA Control System in Direct and Return Mains of CHPP and Development of a Concept for Its Economic Modernization
  • The Development of the Method of Increasing the Storing Capability of Technogenically Disturbed Lands
  • Geology and Mineralogical-Geochemical Features of Uranium Ores of the Deposit of Central Kyzylkum
  • Dynamic Characteristics of a Multilayer Heterostructure
  • Methods for the Synthesis of 2-Phenylquinazolin-4-one and Studying Methylation Reactions in Different Solvents
  • Methodical Approach to Assessing Energy Efficiency Factors of a Gas Company
  • Assessment of the Multiplier Effect of Diversification of the Rural Economy
  • Digital Diagnostic Complex for Identifying and Development of Engineering and Technical Abilities of Adolescents and Youth
  • Determination Of Colorimetric Properties Of Paper Containing Polyester (Lavsan) Fiber Waste
  • Comparative Analysis of Physical and Biochemical Methods for Obtaining Lysates
  • Methods of Interval Analysis in Teaching Mathematical and Computer Modeling
  • Methodological Insights Into Symmetry and Conservation in Quantum Physics
  • Solubility of Air Oxygen and Ozone in Water and Acidic Solution
  • Enhancing the Natural Science Education
  • Statistical Approach to Solving the Inverse Problem of Electrocardiography
  • Use of a Promising Strain of Lactobacillus Plantarum 131 as a Starter Culture for Fermented Sausage Production
  • Study of Possibilities of Introduction of Automated Management Technology in Home Crop Production 
  • The Need and Economic Significance of the Construction of the Shorkul Reservoir
  • Study of Wood Impregnation Using a Vacuum Installation
  • Grain Dust Plant Nutrition Source
  • Mathematical Approaches to Determining the Physical Parameters of Giant Planets
  • The Role of Virtual Demonstration Experiments in Teaching the Ideal Gas Law
  • Calculation of Oil (Gas) Reserves and Associated Components of the Albian Formation K 1 al Using the Example of the Vladimir Filanovsky Field
  • Mathematical Analysis of Sustainable Development of the Region: Demographic Aspect
  • The Synthesis of Aminobutylenical Esters Linolenic Acids and Lipid-Lowering Activity
  • Quantitative Determination of Radum and Radon Contents in Natural Waters of the Uranium-Bearing Region
  • Results of a Study on the Mechanization of Photodegradable Film Application in Cotton Crops
  • Interdisciplinary Teaching Methods for Exploring the Planet Saturn in Astronomy
  • Jordanian Zeolites as Sustainable Material for Green Technology
  • Study of Failure of Casing Mechanisms in Incompatible Zones During Drilling
  • Facies Heterogeneity and Production of Oil Reserves: Conditions, Reasons and Results
  • Application of Artificial Intelligence Technologies in City Farming and Home Cultivation
  • Improvement of Independent Education of Students in Biological Science Based on Information Communication Technologies
  • Increasing the Effectiveness of Teaching Physics Through Virtual Laboratories
  • Formation of the Solid Phase in Ternary Water-Amino Acid Systems, H 2 Asp–HGly–H 2 O at 25 o C
  • A Semiparametric Estimator for the Exponential Distribution Under Informative Double Censoring
  • Methods of Developing the Competence of Technological Education Teachers
  • Methodological Recommendations for the Development of Creative Competence of Future Physics Teachers Based on Digital Educational Tools
  • A Scientific Approach to Enhancing Ecological Competence Through Life Activity Safety
  • Morphological Characteristics of the Bladder and Kidneys of Rabbits at Different Time Periods After Cystostomy Using a New Modification of the Veterinary Catheter: Experimental Study
  • On the Advantages of Interval Methods for Solving Nonlinear Equations and their Systems When Teaching Numerical Methods
  • The Research Into the Influence of the Gap Between the Seed Removing Pipe and the Auger on the Mechanical Damage of Seeds
  • Synthesis of Urea Derivatives Based on Toluyl Isocyanate
  • Study of Hydrodynamic Modes of Column with Convex-Concave Plate in Implementation of Matter Exchange Processes
  • Methodology of Qualimetric Assessment of Professional Competence of Future Biology Teachers in the Conditions of Inclusive Education
  • Effect of Mobile Load On a Ribbed Multilayer Cylindrical Shell With a Visco-Elastic Filler
  • Development of Polyvinyl Chloride Compositions with Polyphenylene Ether and Investigation of Their Properties
  • Modern Digital Principles of Life Safety
  • Application of the CANARSPI Control Method for a Digital Twin of an Enterprise by the Durbin-Watson Test
  • Formation of the Structure of Naturally Colored Cotton Fiber
  • Properties of Plants for the Accumulation of Heavy Metals in Phytoremedition
  • Principles of Modern Methods for Achieving Educational Results in Natural Science Subjects
  • Analyzing the Environment for Fostering Innovative Eco-Education Competence in Students
  • Research the Process of Drying Fruits, Poly Products and Vegetables in Vacuum Sublimation
  • Mineral Associations in Small-Scale Mining in Southern Ecuador Using X-Ray and Petrographic Analysis
  • Study of the Technological Process of Vegetable Oil Refining as an Object of Monitoring, Control and Management
  • Analysis of the Impact of Geographical Location on the Accuracy of Operational Forecasting of Renewable Energy Resources
  • Architectural and Planning Approaches to the Formation of Urban Leisure Centers
  • Project-Based Learning as a Mechanism for the Enhancement of Cognitive and Communicative Skills in STEM Education
  • Increasing Professional Competence of Students Based on Modern Graphics Programs
  • Ethical Professional Values of Restorers-Conservators
  • The Approaches in the Design of Youth Centers in the Republic of Tatarstan
  • The Role of Project-based Learning in Developing Students' Reflectivity: Experience in STEM Education
  • Formation of Competencies Among Students When Studying the Discipline "Descriptive Geometry and Computer Graphics"
  • Dynamics of Landscape Structure in the Conditions of Spatial Growth of the City
  • Strategies for Developing Personal Competencies of Physics Teachers
  • Methodology of Using Problem Educational Technologies in Teaching the Science of Mathematical Analysis
  • Engineering of a Laboratory Stand for Experimental Detection of Defects in Dielectric Personal Protective Equipment
  • Energy Supply System of the Dock Underwater Station from a Float Wave Power Plant With Unidirectional Continuous Rotation of the Generator Shaft
  • Mathematical Modeling of the Process of Controlling the Windings of DC Electromagnets When Creating Vibrations in the Range Audio Frequencies
  • Simulation Model of an Electric Train With Energy Storage Systems Based on Artificial Intelligence
  • Regional Investment Policy and Improvement Solutions
  • Clark-Wright Algorithm in Routing Small-Batch Cargo Transportation
  • Improving the Efficiency of Cargo Delivery by Automobile Vehicles
  • Design Thinking: A New Model of Artistic Design of a Modern Costume Based on the Principles of Architectural Bionics
  • Analysis of Blended Learning in Higher Education
  • The Typology of Kazan Estates: From Origins to Modernity
  • Assessment of Energy Losses for Low-Frequency Communication Systems in the Norilsk Ore District Geological Structures
  • Actual Problems of Teaching Technical Disciplines
  • Coulometric Method of Measuring the Concentration of Harmful Substances in the Transit Gas
  • Effectiveness of Students' Use of an Electronic Workbook in Developing the Professional Competence of Future Transport Engineers
  • The Impact of the Milling Process as a Key Factor in Pulp and Paper Manufacturing
  • Improving the Precision of a Computerized Contact Interferometer Based on Digital Calibration of the Scale Image
  • Development and Innovation of Energy Installations for Environmentally Friendly Transports
  • Estimating the Exponential Distribution Parameter in the Proportional Hazard Model
  • The Role of Digital Innovations and Human Resource Potential in Advancing Education
  • Using Electromagnetic Levitation Method in Mining
  • Development of Methodology for Competency Hierarchy Formation for an Engineering Technologist Based on Analytic Hierarchy Process
  • Project-Based Learning Programs in STEM: a Review of Main Approaches
  • Developing the Competence of Future Specialists Through Solution of Professional Problems
  • Development of Technologies and Classification Schemes for Mining Technogenic Ore-Rock Formations
  • Optimization of Control System Parameters Under Deterministic and Random Perturbations
  • Cross-Cutting Technologies in the Digital Educational Environment
  • Prospects for the Development of Education through Project-Based Learning
  • Recommendations for Developing a Safe Machine Learning Ontology
  • Didactic Conditions of Formation of Professional Applied Mathematical Preparation of Future Engineers
  • Practical Application of Pedagogical Design in a Technical University 
  • The Application of Artificial Intelligence and the Internet of Things to Solve Challenges of Practical Relevance
  • Improving the Efficiency of Forest Industry Enterprises Through Sustainable Development Practices
  • Improving Thinking and Imagining Skills in School Students by Training the Physics Using Simulations
  • Analysis of Factors and Aspects in the Study of Internet Addiction
  • Interdisciplinary Project-Based Learning in STEM Education: Advantages and Specifics of Organization
  • Algorithms and Models of Self-Analyzing Systems for Practical Tasks of Students
  • Identification of the Impact of the COVID-19 Pandemic on University Students’ Academic Performance Based on Intelligent Analysis of Educational Data
  • Data Mining of Scientific Publications on the Perimeter Security of Long-Distance Facilities
  • Simulation Modeling of Production Processes as a Factor in Sustainable Development of the Forestry Industry
  • Exploring Personality Development and Assessment Options for University Students
  • Mathematical Modeling for Evaluating Transport and Technological Processes in Wood Supply Chains
  • Quality Management Methods and Their Role in Improving the HACCP Food Safety System at the Enterprise
  • Studying the Characteristics оf Discrete Fourier Transformation in the Application of Measurement Control Systems
  • Hardware-Software Platform for Measuring Predictive Control and Configuration of Multifunctional Measuring Transducers
  • Software Control System by the Charge Sintering Process
  • Digital Cluster: Opportunities and Competitive Advantages
  • Development of Software for Conducting Quality Assessment of Emergency Response Operations
  • The Decomposition Algorithm of the Formal Context Into Fragments
  • Innovative Uses of Digital Technologies in Teaching Humanities in Higher Education
  • The Role of Innovative Methodologies in the Implementing the Electronic Educational System: Agile, Scrum, and EduScrum
  • The Evolution of PR and Advertising Services in Uzbekistan's Digital Sphere
  • Educational Webinar as an Interactive Tool to Improve Student Learning Efficiency
  • The Role of Blum’s Taxonomy in the Development of Students’ Critical Thinking
  • VR Technology in Distance Student Science Olympiads in Geography
  • An Interdisciplinary Approach to the Study of Conflict Situations in Structurally Complex Production Systems
  • Opportunities for the Development of the Independent Educational Activity of Future Teachers Based on Digital Technologies
  • Environmental Factors of Students' Professional Orientation in Extracurricular Activities
  • Organization of Independent Education in the Credit-Module System Using Web Applications
  • Prospective Directions and Stages of Creation of Smart Technologies in the Educational System
  • Advantages of Organizing Lectures Based on Smart Technologies
  • Virtual Technologies in Innovative Educational Practices
  • Integration of Digital Technologies Into the Educational Process
  • Digital Education: Augmented Reality in EFL Classroom
  • Improving Innovative Activities Based on Software in Digital Learning Environment
  • The Impact of Digital Technologies on the Development of Human Resource Management Strategy
  • Prospects of Modern Education with the Introduction of New Information and Communication Technologies
  • The Use of Modern Pedagogical and Information Technologies in Biology Lessons
  • Modern Methods of Organizing Independent Education of Students in a Digital Educational Environment
  • The Method of Designing a Medical Database for Students
  • Origin and Evolution of Digital Ergo-Ecology in the Conditions of Socio-Technogenic Development of the World
  • Gamification in Digital Educational Practices of Technical Universities
  • Computer Games and New Sports in the Teaching of Physical Education and Basic Military Training
  • Models and Algorithms for Introducing Blockchain Technologies in Education
  • Virtual Local Networks: Technology for Combining Remote Nodes Into a Single Space
  • Using E-Learning System: Mathematics Teaching Experience at University
  • Methodology for Testing of the Developed Network Software for the Use of New Attack Techniques
  • Development of an Augmented Reality-Based Mobile Application for Articulation Therapy Work with Preschool Children with Speech Impairments
  • Interactive Application for Demonstrating the Fairness of the Laws of Set Theory and Equality of Sets
  • Improving the Process of awarding Scholarships at a Higher Education Institution using the ELMA BPM System
  • Role Play Speaking Games and ICT in Teaching EFL
  • Mathematical and Statistical Analysis of Students' Mastery Levels in the Programming Environment for Teaching Informatics and Digital Technologies
  • Improving the Professional Competence of Future Economists With the Help of Programming Languages
  • Analysis of the MООDLE Platform at Bukhara State University
  • Creation of Environmental Pollution Monitoring Systems Using Digital Educational Technologies
  • Decision Support for Choosing VR Technologies
  • Methods of Teaching the Basics of Programming to Bachelors of Computer Science at Bukhara State University
  • Methodology for Developing Students' Algorithmic Thinking About Creating Applications
  • Utilizing Information Communication Technologies in Contemporary Biology Education
  • Developing Student Competencies in Computer Hardware and Software Provision
  • The Role and Impact of AI-Enhanced Virtual Laboratories in Mechanical Engineering Education
  • Effective Methods for Organizing Laboratory Sessions in Programming Language Courses
  • Enhancing the Teaching of Electrical Capacity and Capacitors Through Practical Training
  • Basics of Developing the Competence of Future Computer Science Teachers Using Digital Technologies
  • Developing Students' Competence in Designing Three-Dimensional Learning Tools
  • Using Ontological Approach in Organizing Educational Processes
  • Semantic Modeling of the “Publisher-Subscriber” Scheme of the IoT Network for Choosing Broker Settings
  • Information Technologies in the Formation of Correct Articulation Apparatus of Foreign Language Learners
  • Organizing Practical Classes in Computer Graphics
  • Evaluation of Efficiency in the Organization of Self-Study With the Assistance of Digital Educational Tools From Mathematics to Statistics
  • Blockchain Technologies in Scientific Research
  • Features of the Computer Algebra System Maple for Studying Boolean Algebra
  • Methodology for Developing Students' Algorithmic Thinking About Programming
  • Computer Modelling of Physical Objects and Phenomena as a Tool for Solving Professional Tasks
  • Integrating Mobile Technologies Into Programming Instruction for Classroom Activities
  • Virtual Technologies in the Educational Process Development
  • Method of Organization of Classes in Higher Education Institutions Using Flipped Classroom Technology
  • Optimizing Mechanical Engineering Curriculum Design Using AI and Machine Learning
  • AI-Driven Automated Grading Systems for Mechanical Engineering Education
  • The Role of AI-Driven Intelligent Tutoring Systems in Enhancing Mechanical Engineering Education
  • Convolutional Neural Networks in Human Body Movement Recognition: an Experimental Investigation
  • Training of an Engineering Specialist at a University in the Context of Integrating the STEM Approach and the QFD Methodology
  • Developing an IoT-Based Remote Monitoring System for Smart Homes Using Arduino Ethernet Shield
  • ICT in Teaching Communication Skills to Engineering Specialists
  • Organization of Practical Classes in Physics Based on Interdisciplinary and Industrial Integration
  • Assessing the Sustainability of Light Industry Sectors in the Competitive Struggle of the Region

III International Conference

CAMSTech-III 2022: Advances in Materials, Systems and Technologies

Conference Materials


About the Conference


Website of the conference

International and Russian Union of Scientific and Engineering Associations, Krasnoyarsk Regional Union of Scientific and Engineering Associations, Krasnoyarsk Science and Technology City Hall are organizing III International Scientific Conference on Advances in Materials, Systems and Technologies - CAMSTech-III 2022. The Conference will take place in Krasnoyarsk on 29-31 July 2022.

Tashkent Institute of Irrigation and Agricultural Mechanization Engineers (Tashkent, Uzbekistan) and Bukhara Engineering Technological Institute (Bukhara, Uzbekistan) are partner universities of the Conference.

We invite scientists, specialists and research teams as well as representatives of the enterprises working in the spheres of materials science, automation and mechanical engineering to participate in the Conference.

The purpose of the Conference is to share the experience of leading experts in the application of innovative technologies, mathematical methods and information management systems in industrial production, in the fields of aerospace, energy and chemical engineering, materials science and design of new materials, as well as engineering and automation of technological processes.

Proceedings of Camstech-III published in AIP Conference Proceedings, volume 3021

Proceedings of Camstech-II - Sections 1-7 are published in AIP Conference Proceedings, Volume 2467

Proceedings of Camstech-II - Section 8 are published in IOP Conference Series: Materials Science and Engineering - Volume 1181

Proceedings of the I International Conference are published in IOP Conference Series: Materials Science and Engineering - Volume 919 (indexed in Scopus, RSCI).

 

Conference Programme


Videoreports of the participants


Presentations of the Participants


Reports and papers


CAMSTech-III-1001

Spacecraft Propellant Dispenser for Space Debris Disposal

Maria Barkova, Alexandr Zhukov, Igor Kartsan, Violetta Kuznetsova

Joint Stock Company «Russian Space Systems»; Expert and Analysis Center; Institute of Astronomy of the Russian Academy of Sciences, Moscow; Reshetnev Siberian State University of Science and Technology, Krasnoyars; Marine Hydro-physical Institute, Russian Academy of Sciences; Sevastopol State University, Sevastopol; Tula State University, Tula, Russia

CAMSTech-III-1002

The Peculiarities of the Evaluation of Discrete Deformation as New Theoretical Possibilities for Understanding the Mechanism of Deformation of Real Materials

A. S. Yurchenko

LLC Scientific Production Firm “Tekhosnastka-RTD” 404112, 3a Skladskoy Lane, Volzhsky, Russian Federation

CAMSTech-III-1003

Redundancy using motion compensation methods for image fragments

S.S. Beknazarova, A.Sh. Muhamadiev and Z.R. Ishanxadjayeva

Tashkent University of Information Technologies named after Muhammad Al- Khwarizmi

CAMSTech-III-1004

Impedance, dielectric susceptibility and inductance in HoxMn1-xS solid solutions

Maksim Sitnikov, Anton Kharkov, Hichem Abdelbaki, Fyodor Zelenov, Oleg Nikitinskiy, Eugenia Danilenko

Reshetnev Siberian State University of Science and Technology, Krasnoyarsk, Russia

CAMSTech-III-1005

Analysis of the Strength of the Materials of the Nozzles of the Space Debris Collector

Maria Barkova, Violetta Kuznetsova, Alexandr Zhukov, Igor Kartsan

Joint Stock Company «Russian Space Systems», Moscow; Tula State University, Tula; Expert and Analysis Center; Institute of Astronomy of the Russian Academy of Sciences, Moscow; Reshetnev Siberian State University of Science and Technology, Krasnoyarsk; Marine Hydro-physical Institute, Russian Academy of Sciences; Sevastopol State University, Sevastopol, Russia

CAMSTech-III-1007

Load-bearing control of materials and structures of multi-storey frame buildings

Svetlana Sazonova, Victor Asminin, Tatyana Zyazina, Dmitry Sysoev, Olga Sokolova, Alexander Osipov and Alexander Lemeshkin

Voronezh State Technical University; Voronezh State Forestry University named after G F Morozov; Voronezh State Pedagogical University; Voronezh State Technical University; Voronezh State Technical University; Voronezh State Technical University; Voronezh State University of Engineering Technologies, Voronezh, Russia

CAMSTech-III-1008

Silicon saturation of pipe steel AISI 321 at exposure in the silencing mixture over various time intervals

Aleksey Rubtsov, Djamshed Shermatov, Artemy Khabibullin, Ulyana Strokina

Ufa State Petroleum Technological University

CAMSTech-III-1009

Relationship between the Poisson's ratio and changes in the unit cell parameters of the body-centered crystal lattice of iron in the region of elastic deformation.

Yurchenko Stepan Anatolievich

LLC “TEHOSNASTKA-RTD” 662925, 2 Novaya Str., Petropavlovka, Russian Federation

CAMSTech-III-1010

Distribution of carbon and silicon in 1 X12CrNi25-20 pipe steel having different operating time, during siliconization

Bexultan Seitzhaparov,Aleksey Rubtsov ,Djamshed Shermatov ,Ulyana Strokina

Ufa State Petroleum Technological University

CAMSTech-III-1011

Thermodynamic theory of orientational phase transition in an inhomogeneously stressed easy plane weak ferromagnet

Mirzo Z. Sharipov, Dilnoz S. Ruzieva, Nilufar M. Ergasheva, Firdavs I. Olimpur

Bukhara engineering-technological institute, Bukhara, Uzbekistan

CAMSTech-III-1012

Тribological Properties оf Materials оf Sliding Steel Supports Laser-Hardened Shafts

Valery Alisin

Mechanical Engineering Research Institute of the Russian Academy of Sciences

CAMSTech-III-1013

Formation of silified layer in areas of welded joint of reaction furnance coil

Alexey Rubtsov, Djamshed Shermatov, Bexultan Seitzhaparov, Ulyana Strokina

Ufa State Petroleum Technological University

CAMSTech-III-1014

The simulation model of hydraulic devices’ noise level caused by pressure pulsation, vortex formation and damping of the medium.

Andrey Batrak, Mariya Polyushkina, Evgeniy Sheglov, Nikolay Polyushkin.

Department of Standardization, Metrology and Quality Management, polytechnical school, Siberian Federal University, Krasnoyarsk, Russia

CAMSTech-III-1015

Clarification of the Boundaries of Hunting Grounds in a Geographic Information System for the Rational Use of Biological Resources

Artеm Rada, Aleksandr Kuznetsov, Anton Timofeev

Kemerovo State University

CAMSTech-III-1016

Prediction of the accumulation process of the contact and fatigue damages in the welded rail joints

Zulfiya Fazilova, Alexey Loktev, and Ekaterina Gridasova

Russian University of Transport (MIIT), Moscow, Russia; Far Eastern Federal University, Vladivostok, Russia

CAMSTech-III-1017

Additive technologies application prospects for creation of repairable wear resistant inserts for the purpose of extension of hydraulic turbine flow part elements life

Alexey Mednikov, Aleksandr Tkhabisimov

MIREA - Russian Technological University, Moscow, Russia

CAMSTech-III-1018

PHB-based composites with various types of fillers: comparative stress tests

Nur Galyavetdinov, Guzel Ilalova, Ruslan Safin, Natalia Kraysman

Kazan National Research Technological University, Kazan, Russian Federation

CAMSTech-III-1019

Slow Release Mineral Fertilizers – the Production and the Usage Processes

I. Bamatov

FGBNU FIC “V. V. Dokuchaev Soil Science Institute” Pyzhevsky lane, 7s2, Moscow, 119017

CAMSTech-III-1021

Comparative Analysis of Algorithms for Optimizing the Weight Coefficients of a Neural Network when Adjusting its Structure Applying Genetic Programming Method

Pavel Sherstnev, Anastasiya Polyakova, Leonid Lipinskiy

Reshetnev Siberian State University of Science and Technology, Krasnoyarsk, Russia; Prof. V. F. Voino-Yasenetsky Krasnoyarsk State Medical University, Krasnoyarsk, Russia; Bekhterev National Medical Research Center of Psychiatry and Neurology, Ministry of Health of Russia, Saint Petersburg, Russia; Peoples’ Friendship University of Russia, Moscow, Russia

CAMSTech-III-1022

Problems of Material Selection in the Design of Disc Brakes Based on Magneto-Rheological Fluid

Ilya Frolov , Andrei Vorotnikov , Semen Bushuev , Yuri Poduraev

Moscow State University of Technology "STANKIN", Moscow, Russia

CAMSTech-III-1023

Tribological Studies of Friction Pairs during Lead-Bismuth Lubrication in Nuclear Power Pumps

Valery Alisin, Alexey Lukyanov, Mikhail Roshchin

Mechanical Engineering Research Institute of the Russian Academy of Sciences, Moscow, Russia

CAMSTech-III-2001

Simulation of Electron-Beam Welding Mode of a Thin-Walled Structure Made of Alloy AD31

Sergei Kurashkin, Yuriy Seregin, Vadim Tynchenko, Aleksander Murygin, Svetlana Kotelnikova

Reshetnev Siberian State University of Science and Technology, Krasnoyarsk; Siberian Federal University, Krasnoyarsk, Russia

CAMSTech-III-2002

Maximum stresses in flat cover of apparatus hatch under conditions of corrosion wear in presence of scratch on surface

Petr Kulakov, Aleksey Rubtsov, Veronika Gracheva, Vitaliy Afanasenko and Marina Bikmukhametova

Ufa State Petroleum Technological University, Ufa, Russia

CAMSTech-III-2003

The Unit for Producing Cuboid Crushed Stone from Rocks with a Shale Texture

Alexey Romanovich, Evgeniy Chekhovskoy, Marina Romanovich, Sergey Schastlivenko

Belgorod State Technological University named after V.G. Shukhov,Belgorod, Russia; K.N. Toosi University of Technology, Tehran, Iran

CAMSTech-III-2004

Features of the Kinematic Analysis of the Power Distribution Mechanism, Which Provides a Turn with Zero Radius

R Yu Dobretsov, V A Sokolova, E А Tikhonov, A I Karnaukhov, V V Taraban and S Ye Ariko

Peter the Great St. Petersburg Polytechnic University, St.Petersburg, Russia Military Academy of Communications named after Marshal of the Soviet Union S.M.Budyonny, Saint Petersburg, Russia Petrozavodsk State University, Republic of Karelia, Petrozavodsk, Russia Reshetnev Siberian State University of Science and Technology, Krasnoyarsk, Russia Saint Petersburg Mining University, Saint Petersburg, Russia Belarusian State Technological University, Minsk, Republic of Belarus

CAMSTech-III-2005

Logical Control Models of Industrial Material Processing Plants as Automation Objects

Elena Muravyova1 and Ilesjon Karimov

Ufa State Petroleum Technical University, Sterlitamak, Russia

CAMSTech-III-2006

Another Approach to Modeling of Fuzzy Drive Control System Based on Vector-Matrix Description

Sergej Cherniy, Alina Buzikaeva, Irina Povkh, Larisa Alekseeva, Viktor Mendel and Ruslan Bazhenov

Komsomolsk-na-Amure State University, Komsomolsk-na-Amure; Far Eastern State Transport University, Khabarovsk; Pacific National University, Khabarovsk;Sholom-Aleichem Priamursky State University, Birobidzhan, Russia

CAMSTech-III-2007

Simulation of the Process of Verification of Purchased Products in Notation BPMN

N Zh Shkaruba, O A Leonov, G N Temasova, Yu G Vergazova and D A Bogolubova

Russian State Agrarian University − Moscow Timiryazev Agricultural Academy, Moscow, Russia

CAMSTech-III-2008

Organization of Production Processes at Machine-Building Enterprises under Conditions of Digital Transformation

Sergey Novikov, Andrey Sazonov

Moscow Aviation Institute (National Research University), Moscow, Russia

CAMSTech-III-2009

Software Image Defect Detection of Full-Fashioned Textures in Textile Industry

Andrey Zatonskiy, Svetlana Varlamova, Saida Beknazarova, Tatiana Gorbunova, Petr Alutin, Oleg Belozerov and Ruslan Bazhenov

Perm National Research Polytechnic University, Perm, Russia; Tashkent University of Information Technologies named by Muhammad Al- Khwarizmi, Tashkent, Uzbekistan; Moscow State University of Civil, Moscow; Blagoveschensk State Pedagogical University, Blagoveschensk; Far Eastern State Transport University, Khabarovsk; Sholom-Aleichem Priamursky State University, Birobidzhan, Russia

CAMSTech-III-2010

Precise Logic Controllers with Steptime Fuzzification Algorithm of Input Parameters

Elena Muravyova and Dmitry Podlesskiy

Ufa State Petroleum Technical University, Sterlitamak, Russia

CAMSTech-III-2011

Web System of Fire Danger Evaluation and Forecast According to the Global Climate Model Global Forecast System

Vladimir Glagolev, Оlga Dolmatova, Elena Gafiatulina, Dmitrii Zhuravlev, Vasilii Masyagin and Ruslan Bazhenov

Sholom-Aleichem Priamursky State University, Birobidzhan; Omsk State Agrarian University named after P. A. Stolypin, Omsk; Far Eastern State Transport University, Khabarovsk; Primorskaya State Academy of Agriculture, Ussuriisk; Omsk State Technical University, Omsk, Russia

CAMSTech-III-2012

Automated Stand for the Electrical Testing and Diagnostics of Resource Characteristics of the Lithium-Ion Accumulators

Evgeniy Kopylov, Dmitriy Lobanov, Enis Mizrakh, Tatyana Oreshenko

Siberian State University of Science and Technology named after academician M. F. Reshetnev Krasnoyarsk, Russia

CAMSTech-III-2013

Probabilistic Characteristics of a Rough Layer Made Up of Pyramid-Type Irregularities

Igor Bobrovskij

Togliatti State University, Togliatti, Russian Federation

CAMSTech-III-2014

Parameters of a Rough Layer Formed by Conical Type Irregularities

Igor Bobrovskij

Togliatti State University, Togliatti, Russian Federation

CAMSTech-III-2016

influence of grain size on the hardness of metal

Y. N. Tsvetkov and Y. K. Loparev

Admiral Makarov State University of Maritime and Inland Shipping, 5/7, Dvinskaya str, Saint-Petersburg, Russia

CAMSTech-III-2017

Problems in Using the Microhardness Method to Assess the Ultimate Deformation of the Surface of Cast Alloys During Wear

Y. O. Fiaktistov, Y. N. Tsvetkov, E. R. Kudryavtseva, E. O. Gorbachenko and Y. K. Loparev

Admiral Makarov State University of Maritime and Inland Shipping, 5/7, 198035, Dvinskaya str, Saint-Petersburg, Russia

JSC "LENMORNIIPROEKT" 3/2, 198035,Mezhevoy canal, Saint-Petersburg, Russia

CAMSTech-III-2018

Approaches to Building Systems For Collecting and Processing Data on the Operation of Technological Equipment at Industrial Enterprises

Petr A. Nikishechkin, Anatoly N. Nikich

Moscow State University of Technology "STANKIN"

CAMSTech-III-3001

Prospects for the use of artificial intelligence technologies in the digital economy

Tatiana Subtselnaya, Sergey Tishchenko, Alexander Zolkin, Vladimir Tormozov, Anatoly Dmitriev

Lomonosov Moscow State University (Moscow), Moscow; Povolzhskiy State University of Telecommunications and Informatics, Samara; "Pacific National University", Khabarovsk; Siberian State University of Science and Technology named after Academician M.F. Reshetnev, Krasnoyarsk, Russia

CAMSTech-III-3002

Strategy for the Development of Resource-Saving Enterprises of the Industrial Complex Based on the Porter Model

Aleksey I. Shinkevich, Olga V. Antipova, Nadejda Yu. Psareva and Naira V. Barsegyan

Kazan National Research Technological University, Kazan; Almetyevsk State Oil Institute, Almetyevsk; State University of Management, Moscow, Russia

CAMSTech-III-3003

Evaluation of the Economic Efficiency of the Use of Aggregate Equipment in Mechanical Engineering

Oleg Leonov, Galina Temasova, Nina Shkaruba, Yulia Vergazova and Daria Bogolyubova

Russian State Agrarian University – Moscow Timiryazev Agricultural Academy, Moscow, Russia

CAMSTech-III-3004

Application of recurrent neural networks to predict the effect of the use of incentive stocks in retail chains

Mikhail G. Dorrer 1, Anatoly V. Fomin 2, Dmitry A. Loginov 2 and Alexander G. Ovchinnikov 2

Reshetnev Siberian State University of Science and Technology, 31, Krasnoyarsky Rabochy Ave., Krasnoyarsk, 660037, Russian Federation
2 LLC "MaxBonus", 5, Baturina street, Krasnoyarsk, 660135, Russian Federation

CAMSTech-III-3005

Application of Optimization Methods During Construction of Info Communication Systems

K. Goloskokov and V. Korotkov

Admiral Makarov State University of Maritime and Inland Shipping, 5/7 Dvinskaya St., St. Petersburg, 190031, Russia

CAMSTech-III-3006

The Role of Private Business in the Space Industry and

Roscosmos Corporation in the Development of Space Transport

Anton Smirnov, Elena Smyaglikova, Evgeniy Smolokurov and Alim Mazhazhikhovd

Admiral Makarov State University of Maritime and Inland Shipping, 5/7 Dvinskaya St., St. Petersburg, 190031, Russia

CAMSTech-III-3007

A modern approach to ensuring the safe navigation of foreign ships on the inland waterways of the Russian Federation

Karetnikov V.V.,
Burkov A.V.,
Prokhorenkov A.A.,
Efimov K.I.

Admiral Makarov State University of Maritime and Inland Shipping, 5/7 Dvinskaya St., St. Petersburg, 190031, Russia

CAMSTech-III-3008

Training on Arctic programs from the point of view of a university student

Svetlana Taranukha and Marina Saveleva

Admiral Makarov State University of Maritime and Inland Shipping, 5/7 Dvinskaya St., St. Petersburg, 190031, Russia

CAMSTech-III-3009

Using Neural Networks to Recognize Text Labels of Raster

Navigation Maps

Alexander Egorov, Nataly Krupenina and Lyubov Tyndykar

Admiral Makarov State University of Maritime and Inland Shipping, 5/7 Dvinskaya St., St. Petersburg, 190031, Russia

CAMSTech-III-3010

Neurointerface Modeling for Controlling Dynamic Systems

Yulia V. Tsymay, Anatoliy P. Nyrkov and Mariia V. Kardakova

Admiral Makarov State University of Maritime and Inland Shipping, 5/7 Dvinskaya St., St. Petersburg, 190031, Russia

CAMSTech-III-3011

Autonomous technical means – a tool of a transport security violator

Sergey S. Sokolov, Oleg N. Gubernatorov and Elizaveta K. Egorova

Admiral Makarov State University of Maritime and Inland Shipping, 5/7 Dvinskaya St., St. Petersburg, 190031, Russia

CAMSTech-III-3012

Trends in Road Construction in Russia: Analysis of

Financing of The Road Industry, The Experience of The

Scandinavian Countries and Development Prospects

Anton Smirnov, Evgeniy Smolokurov and Lia Gareeva

Admiral Makarov State University of Maritime and Inland Shipping, 5/7 Dvinskaya St., St. Petersburg, 190031, Russia

CAMSTech-III-3013

Prospects for the Development of St. Petersburg as a Smart

City on the Example of Introducing Modern Technologies in

its Transport System

Anton Smirnov, Evgeniy Smolokurov, Larisa Smirnova and Yuriy Fir

Admiral Makarov State University of Maritime and Inland Shipping, 5/7 Dvinskaya St., St. Petersburg, 190031, Russia

CAMSTech-III-4001

Effective organization of personal data protection

Dmitriy V Kornienko

Bunin Yelets State University

CAMSTech-III-4002

perating Life Expectancy Verification for the Spacecraft Equipment

Kristina Radionova, Tatyana Oreshenko, Dmitriy Lobanov

Siberian State University of Science and Technology named after academician M. F. Reshetnev Krasnoyarsk, Russia

CAMSTech-III-5001

Creation of a Spatially Distributed Detection System for Unmanned Aerial Systems

Valentin Lantsov, Alexander Koryakin

State Research Institute of Applied Problems (GosNIIPP), St. Petersburg, Russia

CAMSTech-III-5002

Application of Low-potential Heat for Heating Sports Facilities

Andrey Medyakov, Pavel Anisimov, Gulnaz Ismagilova, Anastasia Mironova and Pavel Lapygin

Volga State University of Technology

CAMSTech-III-5003

Optimization of Ecological Characteristics of Coal-water Suspension

Ludmila Kashkina, Olesya Stebeleva

Siberian Federal University, Krasnoyarsk, Russia

CAMSTech-III-5004

Position correction algorithm of bush pads when solving the problem of developing oil fields

Egor D. Kulakov, Anton S. Mikhalev, Alexander V. Sarenkov, Artem D. Shutalev, Artem E. Fedoreev

Siberian Federal University; LLC RN-KrasnoyarskNIPIneft, Krasnoyarsk, Russia

CAMSTech-III-5005

Cognitive Modeling Methods in Dynamic Systems Analysis

Olga V. Druzhinina, Olga N. Masina, Elena V. Igonina

Federal Research Center “Computer Science and Control” of Russian Academy of Science, Moscow, Russia; Bunin Yelets State University, Yelets, Russia

CAMSTech-III-5006

Change in Stress-Strain State ECU Furnace Coils During Operation

Evgeniy Zakirnichny, Valeriy Berdin, Aleksey Rubtsov, Valeriy Dementev

Ufa State Petroleum Technological University, Ufa, Russia

CAMSTech-III-5007

Features of the Mutation Operator for the Problems of Automatic Grouping of Objects

Vladimir Kazakovtsev, Lev Kazakovtsev

Reshetnev Siberian State University of Science and Technology, Krasnoyarsk, Russian Federation; Siberian Federal University, Krasnoyarsk, Russian Federation

CAMSTech-III-5008

Mathematical Simulation of Thermal Deformation Processes of Resistance Spot Welding

Yevgeny Yashmetov, Lev Kazakovtsev, Lyudmila Egorova, Aleksandra Korableva

Reshetnev Siberian State University of Science and Technology, Krasnoyarsk

CAMSTech-III-5009

Evolutionary Algorithm for Automated Formation of Recurrent Neural Networks

Pavel Sherstnev, Anastasiya Polyakova, Leonid Lipinskiy and Eugene Semenkin

Reshetnev Siberian State University of Science and Technology, Krasnoyarsk, Russia; Prof. V. F. Voino-Yasenetsky Krasnoyarsk State Medical University, Krasnoyarsk, Russia; Bekhterev National Medical Research Center of Psychiatry and Neurology, Ministry of Health of Russia, Saint Petersburg, Russia; Peoples’ Friendship University of Russia, Moscow, Russia

CAMSTech-III-5010

Greedy Algorithm for Finding Pareto Optimal Patterns

Igor Masich, Alena Stupina, Katerina Ponomareva

Siberian Federal University, Krasnoyarsk, Russia

CAMSTech-III-5011

Studying a Fuzzy Computing Resource Management System in a Coevolutionary Algorithm

Aleksandra A. Korableva, Lev A. Kazakovtsev, Leonid V. Lipinskiy, Iuliia A. Khudonogova

Reshetnev Siberian State University of Science and Technology, Krasnoyarsk, Russian Federation

CAMSTech-III-5012

Information Modeling of Technological Processes

Konstantin Goloskokov and Vitaly Korotkov

Admiral Makarov State University of Maritime and Inland Shipping, Saint-Petersburg, Russia

CAMSTech-III-5013

Trends in the Development of Navigation Aids by the Sky

Origins

Alcybeev G. O.,
Sibilev V. A.,
Kozik S. V.

Saint Petersburg State University, St. Petersburg, Russian Federation

Admiral Makarov State University of Maritime and Inland Shipping, St. Petersburg, Russian Federation

CAMSTech-III-5014

Mathematical Models for Software Development of Control Systems for Unmanned Vessels

Sergey S. Sokolova), German V. Danilin and Tatiana P. Knysh

Admiral Makarov State University of Maritime and Inland Shipping, Saint-Petersburg, Russia

CAMSTech-III-6001

Energy-Saving in the Process of Grinding Materials with an Anisotropic Texture

Alexey Romanovich, Dmitriy Agafonov, Marina Romanovich, Dmitriy Anenko, Aidin Salamzadeh

Belgorod State Technological University named after V.G. Shukhov,Belgorod, Russia; K.N. Toosi University of Technology, Tehran, Iran

CAMSTech-III-6002

Modeling of the Production System of Chemical Engineering Enterprises

Aleksey I. Shinkevich, Madina A. Agisheva, Lyudmila N. Ivanova and Rezeda R. Zaripova

Kazan National Research Technological University, Kazan, Russia

CAMSTech-III-6003

Theoretical Studies of the Vegetable Store Operation Using a Complex of Renewable Energy Sources

Vladimir Svechnikov, Andrey Medyakov and Yuri Sidyganov

Volga State University of Technology

CAMSTech-III-6004

Chemical Engineering as a Tool for the Development of Mesoeconomic Systems

Svetlana S. Kudryavtseva, Naira V. Barsegyan, Dmitriy V. Kharitonov and Andrey F. Battalov

Kazan National Research Technological University, Kazan; JSC "ONPP "Technology" named after A. G. Romashin", Obninsk, Russia

CAMSTech-III-6005

Testing of circuit breakers in production conditions

L A Panteleeva , P L Lekomtsev, E V Dresviannikova, D A Vasilyev, I R Vladekin

Izhevsk State Agricultural Academy, Izhevsk

CAMSTech-III-6006

Power quality in the power supply system of hybrid MHD stirrers of aluminum melt

Evgeny S Kinev, Alexey A Tyapin, Vasily I Panteleev, Mikhail V Pervukhin

Siberian Federal University, Thermal electrical systems LLC

CAMSTech-III-6007

About Corrosion Resistance of Super Hydrophobic Brass Surface

Marat Dasaev, Olga Kalakuckaya, Evgeniy Trushin, Sergey Grigoriev, Oleg Ryzhenkov

MIREA - Russian Technological University, Moscow, Russia

CAMSTech-III-6008

Improvement of the method for forecasting the risk of flooding of territories on the example of the Yenisei river in the area of the settlement of Vorogovo

Yaroslav Grebnev, Dinara Shagidulina, Moskalev Alexander

Siberian Federal University

CAMSTech-III-6009

Impact of surface currents on variations in levels and mean ice thickness of the Arctic seas

A. V. Kholoptsev, S. A. Podporin and E. O. Ol’Khovik

Zubov State Oceanographic Institute, Sevastopol, Russia

Sevastopol State University, Sevastopol, Russia

Admiral Makarov State University of Maritime and Inland Shipping, St. Petersburg, Russia

CAMSTech-III-7001

Automation of the decision-making strategy in the water resources management system

Inna Pivovarova, Alexander Zolkin, Adam Saparbiev

St. Petersburg University of the State Fire Service of the Ministry of Emergency Situations of Russia, Saint Petersburg; Povolzhskiy State University of Telecommunications and Informatics, Samara; Kadyrov Chechen State University, Grozny, Russia

CAMSTech-III-7002

Relationship between low-frequency components of the electroencephalogram and heart rate variability during hyperventilation

Vadim Titov, Olga Dick

Saint Petersburg State University of Aerospace Instrumentation, Saint Petersburg, Russia

CAMSTech-III-7003

Determination of the Effective Number of Hunting Animals Based on Geoformation Data about Hunting Grounds

Artеm Rada, Aleksandr Kuznetsov, Roman Zverev

Kemerovo State University

CAMSTech-III-7004

Features of rumen digestion in young meat breeds with difference in feeding

B. S. Ubushaev, A. K. Natyrov, N. N. Moroz, E. N. Ochirova, I. A. Nidzhlyaeva, S. A. Slizskaya and I. V. Tserenov

Kalmyk State University named after B. B. Gorodovikov, 11 Pushkin Street, Elista, 35800, Russia

CAMSTech-III-7005

Chickpea flour as a functional ingredient for stuffed and chopped semi-finished products

V. N. Khramova, D. I. Surkov, K. A. Lubchinsky, Ya. I. Khramova,

T. Yu. Zhivotova and Yu. D. Danilov

Federal State Budgetary Educational Establishment of Higher Education «Volgograd State Technical University»,

28, V.I. Lenin st, Volgograd, 400005, Russia

Volga Region Research Institute of Manufacture and Processing of Meat-and-Milk Production, 6, Rokossovskogo street, Volgograd, 400131, Russia

Don State Agrarian University, st. Krivoshlykova, 24 Persianovsky, 346493, Russia

CAMSTech-III-7006

Whole grain corn as part of mixed feeder a KR-1 for calves

V. F. Radchikov, T. L. Sapsaleva, I. V. Bogdanovich, A. N. Struk, A. A. Mosolov and M. I. Slozhenkina

RUE «Research and Practical Center of the National Academy of Sciences of Belarus on Animal Husbandry, 222163, 11 Frunze Str., Zhodino, Republic of Belarus

Volga Region Research Institute of Manufacture and Processing of Meat-And-Milk Production, 400131, 6, Rokossovsky street, Volgograd, Russia

CAMSTech-III-7007

The meat productivity of broiler chickens under the influence of glycine-containing feed additives

А. А. Mosolov, Z. B. Komarova, E. G. Abramenko, A. A. Ryadnov and M. I. Slozhenkina

Volga Research Institute of Production and processing of meat and dairy products, Volgograd, Russia

Volgograd State Agrarian University, Volgograd, Russia

CAMSTech-III-7008

The use of innovative natural organic substances in the production of broiler meat: efficiency and safety

A. V. Glushenko, A. A. Mosolov, A. Seidavi, Z. B. Komarova, M. I. Slozhenkina, I. F. Gorlov and E. A. Romanenko

Volga Research Institute of Production and processing of meat and dairy products, Volgograd, Russia

CAMSTech-III-7009

Maintenance of the stability of egg production by breeding the "Hisex brown" cross hens

Z. B. Komarova, M. I. Slozhenkina, E. G. Abramenko, A. A. Mosolov and O. P. Shakhbazova

Volga Research Institute of Production and processing of meat and dairy products, Volgograd, Russia

Don State Agrarian University, Persianovsky, Rostov-on-Don, Russia

CAMSTech-III-7010

Ecological and biological aspects of angiogenic stimulation of invasive neoplasms

A. S. Kuryndina, Yu. N. Melikova, L. F. Sotnikova and D. A. Vilmis

Department of diseases of small domestic, laboratory and exotic animals of the Moscow State University of food Production, Moscow, Russia

CAMSTech-III-7011

The effect of a balanced diet on improving the quality of life in malignant neoplasms

Yu. N. Melikova, A. S. Kuryndina, L. F. Sotnikova and S. N. Kolomiec

Department of diseases of small domestic, laboratory and exotic animals of the Moscow State University of food Production, Moscow, Russia

CAMSTech-III-7012

Mechanism for veterinary certification within the framework of ensuring integrated nvironmental security in the eurasian region

L. F. Sotnikova, I. V. Pogodina, A. F. Baranova and A. V. Gusarov

Department of diseases of small domestic, laboratory and exotic animals of the Moscow State University of food Production, Moscow, Russia

Department of Department of legal and organizational support of business procedures of the «Vladimir state University named after A. G. and N. G. Stoletovs», Vladimir, Russian Federation, Russia

CAMSTech-III-7013

Quality and organoleptic properties of cheeses obtained from the milk of cows of different kappa-casein genotypes (CSN3)

I. M. Volokhov, N. F. Shchegolkov, M. I. Slozhenkina, N. I. Mosolova, I. F. Gorlov, Y. D. Danilov, E. V. Karpenko and S. A. Surkova

All Russian Research Institute of Animal Breeding, Cattle breeding laboratory, Lesnye polyany 141212, Russia

Volga Region Scientific Research Institute of Meat-and-Milk Production and Processing, 6 Rokossovskу st., Volgograd, 400131, Russia

CAMSTech-III-7014

Efficient animal husbandry with the use of protein hydrolysates

F. I. Vasilevich, V. M. Bachinskaya, A. A. Deltsov and S. I. Chinchenkov

FSBEI HE «Moscow State Academy of Veterinary Medicine and Biotechnology – MVA by K. I. Scryabin» Moscow

109472, Russian Federation

Sovkhoz Golovkovo LLC, Moscow region, Naro-Fominsk district, village Golovkovo, Russia

CAMSTech-III-7015

Improving the technology of meat pates using vegetable raw materials of various origins

P. S. Kobylyatsky, М. I. Slozhenkina, Yu. D. Grebennikova, E. V. Karpenko, V. A. Karatunov and A. G. Zolotareva

Don State Agrarian University, 24, Krivoshlykova str., 346493, Persianovsky, Rostov region. Russia,

Volga Region Research Institute of Manufacture and Processing of Meat-and-Milk Production, Volgograd, Russia

Kuban State Agrarian University n.a. I.T. Trubilin, 13, Kalinina, 350044, Krasnodar, Russia

CAMSTech-III-7016

Some results of breeding for the transformation of productive qualities of merino sheep in the arid territories of the south of the Russian Federation

I. F. Gorlov, E. Yu. Anisimova, A. O. Reshetnikova, E. V. Karpenko, V. Kh. Fedorov, Y. A. Kolosov, N. V. Shirokova and N. N. Kolosova

Don State Agrarian University, 24, Krivoshlykova str., 346493, Persianovsky, Rostov region. Russia,

Volga Region Research Institute of Manufacture and Processing of Meat-and-Milk Production, Volgograd, Russia

Kuban State Agrarian University n.a. I.T. Trubilin, 13, Kalinina, 350044, Krasnodar, Russia

CAMSTech-III-7017

Heritability, age-related recurrence and relationship of protective blood factors in pigs

Fedorov Vladimir Christoforovich, Fedyuk Victor Vladimirovich, Shirokova Nadezhda Vasilievna, Kruglikov Alexander Nikolaevich and

Chertov Arkady Arkadievich

Don State Agrarian University Rostov region, Oktyabrsky district, p. Persianovsky, Krivoshlykova str., 24, 346493, Russian Federation

CAMSTech-III-7018

Functional changes of cattle in Ixodiasis disease

F. I. Vasilevich and A.M. Nikanorova

K.I.Skryabin Moscow State Academy of Veterinary Medicine and Biotechnology – MVA by K.I. Skryabin, Moscow, Russia

Moscow Timiryazev Agricultural Academy, Moscow, Russia

CAMSTech-III-7019

Changes in the immunobiological status of cattle in experimental Ixodiasis

F. I. Vasilevich and A.M. Nikanorova

K.I.Skryabin Moscow State Academy of Veterinary Medicine and Biotechnology – MVA by K.I. Skryabin, Moscow, Russia

Moscow Timiryazev Agricultural Academy, Moscow, Russia

CAMSTech-III-7020

Development of meat snack production technology using herbal ingredients

Y. P. Serdyukova, N. V. Shirokova, A. S. Venetsiansky,

E. L. Matveeva and T. S. Skoba

Don State Agrarian University, Rostov region, Oktyabrsky district, p. Persianovsky, Krivoshlykova str., 24, 346493, Russian Federation

Volgograd State University, 100, University Avenue, Volgograd, 400062, Russian Federation

3Kazan Innovation University named after V.G. Timiryasov, 42 Moskovskaya str., Kazan, 420111, Russian Federation

Novocherkassk College of Industrial Technology and Management, Atamanskaya St., 40, Novocherkassk, 346400,

Russian Federation

CAMSTech-III-7021

The study of the relationship of polymorphism of the growth hormone gene with some indicators of sheep meat productivity in the agroecological conditions of the Caspian Sea

E. Yu. Anisimova, N. V. Shirokova, I. F. Gorlov, Y. A. Kolosov, V. Kh. Fedorov, A. O. Reshetnikova and O. A. Knyazhechenko

Volga Region Research Institute of Manufacture and Processing of Meat-And-Milk Production, 6, Rokossovsky’s street, Volgograd 400131, Russian Federation

Volgograd State Technical University, 28, Lenin’s Avenue, Volgograd 400005, Russian Federation

Don State Agrarian University Rostov region, Oktyabrsky district, p. Persianovsky, Krivoshlykova str., 24, 346493, Russian Federation

 

Feedback