Conference materials

AMS: Advances in Materials Sciences

AMS-2021
AMS-2024

International Conference

AMS-IV 2024: Advances in Materials Sciences

Conference Materials

About the conference

Conference Website

 

IV International Conference "Advances in Materials Sciences" (AMS-IV 2024): Summary

The IV International Conference "Advances in Materials Sciences" (AMS-IV 2024) was held on May 30–31, 2024, in Bukhara, Uzbekistan, organized by Bukhara Engineering-Technological Institute with the participation of universities and organizations from Uzbekistan, Tajikistan, Kyrgyzstan, Russia, Turkey, Malaysia, India, and other countries.

Conference Focus

The seminar brought together scientists and specialists from academic institutions, universities, research centers, and industry to exchange experience in advanced high-tech manufacturing, industrial chemistry, materials physics, metallurgy, nanotechnology, crystallography, plastics, polymers, ceramics, and glass technology. Both theoretical and practical aspects of materials research were discussed, including synthesis, property analysis, processing technologies, and practical applications.

Main Topics

  • Materials and state of matter, condensed matter physics (liquid and solid-state physics)

  • Solid state chemistry, surface chemistry, adsorption, and crystallography

  • Industrial chemistry and hydrometallurgical technologies

  • Plastics, polymers, ceramics, and glass technology

  • Metals technology, metallurgy, steel, and alloys

  • Materials science, surface and coatings engineering

  • Hydraulics and pneumatics, materials testing

  • Materials and technologies in construction

  • Nanotechnology

Publication of Proceedings

The conference proceedings are published as peer-reviewed articles in English in the following journals by Trans Tech Publications:

  • Key Engineering Materials (KEM) (Scopus Q4)

  • Materials Science Forum (MSF) (Scopus Q4)

  • Solid State Phenomena (SSP) (Scopus Q4)

  • Defect and Diffusion Forum (DDF) (Scopus Q4)

  • Advances in Science and Technology (AST) (Scopus, since November 2023)

  • Additional journals: EH, CTA, EI, EC, AMR, AMM, JMNM, DFMA (by author agreement)

For example, articles on steel and alloys, defect detection, and machine design have been published in Materials Science Forum, Diffusion Foundations and Materials Applications, and Applied Mechanics and Materials, respectively (see conference proceedings for details).

The full list of indexed journals can be found in the current Scopus database; participants are encouraged to verify the indexing status via the official Scopus source list.

https://www.scientific.net/book/4th-international-workshop-on-advances-in-materials-science-ams-iv/978-3-0364-1243-6Distributed

The AMS-IV 2024 conference successfully fostered international scientific exchange and contributed to the advancement of materials science through high-quality publications in reputable journals.

 

Papers

 

 Chapter 1: Steel and Alloys

Improvement of the Technology of Melting of Low Alloy Steel Alloy in an Electric Arc Furnace

N. Kholmirzaev, N. Turakhodjaev, N. Saidmakhamadov, N. Tadjiev, J. Khasanov, B. Yusupov, S. Khojibekova, N. Sadikova, I.S. Nosirkhujaev and J. Juraev

Published in: Materials Science Forum Vol. 1139, pp 3-9 doi:10.4028/p-2AMBsZ

Mathematical Modeling of the Effect of TiC Nanopowder Particles on the Wear Resistance Properties of Low-Alloy Steel

N. Kholmirzaev, N. Saidmakhamadov, J. Khasanov, N. Tadjiev, B. Yusupov, N. Sadikova, O. Yuldashev, F. Makhmudov, I.S. Nosirkhujaev and Z. Nurdinov

Published in: Materials Science Forum Vol. 1139, pp 11-19 doi:10.4028/p-gIS27O

Study of Variability Phenomena in Direct Energy Deposition of Nickel-Based Superalloy on Geometric Accuracy and Residual Stress Formation

A.I. Khaimovich, E. Nosova, A. Baliakin, E. Zlobin, M. Oleinik and A. Kuzina

Published in: Materials Science Forum Vol. 1139, pp 21-30 doi:10.4028/p-PwmkE1

Chapter 2: Modern Approaches for Defect Detection

Automated Surface Defect Detection in Machined Parts Using Deep Learning Techniques and Machine Vision

A. Abrorov, M. Juraev, K. Nodira and E. Ismailov

Published in: Diffusion Foundations and Materials Applications Vol. 38, pp 27-37

doi:10.4028/p-uMcty0

Enhanced Surface Defect Detection in Industrial Manufacturing Using Convolutional Neural Networks and Advanced Imaging Techniques

O. Tuyboyov, Z. Muxiddinov, S. Shamiliddin and A. Mahliyo

Published in: Diffusion Foundations and Materials Applications Vol. 38, pp 39-50

doi:10.4028/p-ksFUB8

Study of Trajectories Scattered Ar+ Ions from the CdTe(001) <110> at the Glancing Incidence

S.R. Sadullaev, U.O. Kutliev, A.Y. Saidova and R.R. Ro‘zmetov

Published in: Diffusion Foundations and Materials Applications Vol. 38, pp 51-56

doi:10.4028/p-4szJBJ

 

Chapter 3: Research and Design of Machines and Machine Parts

Enhancing Machine Tool Housing Design through Ultra High-Performance Concrete

K. Ganieva, F. Narzullaeva, M. Davlatova, D. Ziyoeva and A. Saidov

Published in: Applied Mechanics and Materials Vol. 923, pp 33-37 doi:10.4028/p-5799sF

Optimization of CNC Machining Tool Paths Using Reinforcement Learning Techniques

M. Juraev, A. Abrorov, K. Akhmedova and S. Abdullayev

Published in: Applied Mechanics and Materials Vol. 923, pp 39-48 doi:10.4028/p-4pj98Q

Enhancing CNC Machining Tool Path Planning through Reinforcement Learning and Optimization Techniques

O. Tuyboyov, A. Baydullayev, A. Jeltuxin and Z. Muxiddinov

Published in: Applied Mechanics and Materials Vol. 923, pp 49-58 doi:10.4028/p-cU4ff5

III International Scientific Workshop

AMS-III: Advances in Materials Sciences III - 2022

Workshop Materials

Workshop online programme
About the workshop
Videoreports and recordings of the sessions
Presentations of the participants
Reports and papers of the participants

About the Workshop

The International and Russian Union of Scientific and Engineering Public Associations, Krasnoyarsk Science and Technology City Hall are holding the III International Scientific Workshop "Advances in Materials Science" - AMS-III 2022 in the framework of the IV International Conference on Advances MIST Aerospace - IV 2021.

We invite scientists, specialists and research teams as well as representatives of the enterprises interested in all aspects of theoretical and practical research of materials science: synthesis, analysis of properties, technology of materials processing and their use to participate in the Workshop.

The purpose of the Workshop is to exchange the experience of leading experts in the application of advanced science-intensive production technologies, industrial chemistry, physics of materials, metallurgy and nanotechnology. The theoretical and practical aspects of material science research are considered: synthesis and analysis of material properties, materials processing technologies and their practical use.

Proceedings of AMS-II Workshop "Advances in Materials Science" are published in Materials Science Forum - Volume 1049

Proceedings of AMS-Workshop "Advances in Materials Science" (Section 5) are published in Materials Science Forum (Volume 1031).

 

Workshop Programme

Programme

Videreports

Presentations

Papers

Chapter 1: Materials and State of Matter, Condensed Matter Physics

Mapping the Kumaraswamy Distribution for the Analysis of Polydisperse Materials

V. Polosin

 

Investigation of Stepped InP(001)<110> Surface by the Method of Low Energy Ion Scattering

M.K. Karimov, U.O. Kutliev, M.U. Otabaev and I.A. Khajieva

 

Mathematical Modeling of the Liquefied Gases Hydrates Formation

N. Shostak and E. Zaporozhets

 

Physics of a Diffraction-Quality Optical System, Taking into Account the Range of Received Radiation

A. Zhukov, T. Kalinin, M. Prokhorov, V. Tipaev, D. Khrestinin and I. Kartsan

Chapter 2: Solid State Chemistry and Polymers

Transformation of the Structure and Adsorption Properties of Bentonite During Physical and Chemical Treatment

A.E. Buntin and V. Agliullin

 

Calculate a Batch Adsorber with a Fixed Bed of Sorbent

N. Legkiy, S. Kryventsov and V. Shumilin

 

Approach to Assessment of Thermodestructive Resistance of Polymer-Containing Finishing Building Materials

E. Chernushevich, P. Shirinkin and Y. Bezborodov

 

Ozone Treatment of Wood Filler in Polymer Building Materials

R.R. Safin, S.R. Mukhametzyanov and R.V. Salimgaraeva

Chapter 3: Metals Technology and Metallurgy, Steel and Alloys

Effect of Cutting Parameters on Temperature in the Cutting Zone in a High-Speed Steel Turn-Milling Process

G. Matlygin, A. Savilov, A. Pyatykh and S. Timofeev

 

Optimization of Wire Drawing Process in Terms of Rheological Characteristics of Stretching Material and Refinement of Die Hole Geometry

I. Khaimovich and A.I. Khaimovich

 

Influence of the Process Parameters of Incremental Forming of Personified Implants of the Cranial Bones on their Geometry

Y.A. Erisov, A. Nikolaenko, I. Petrov, S. Surudin and A. Kolsanov

 

Simulation of High-Speed Machining Processes by Multi-Edge Mills

Y. Gordeev, V.B. Yasinsky, E. Spirin, A.S. Binchurov, M. Vakulin and S. Filippov

 

Surface Saturation Monitoring of Forming Products from Titanium Alloy VT20 with Additives

A. Luchinovich, V. Gadalov, I. Vornacheva, D. Loparev, A. Scherbakov, V.N. Malikov and V.A. Sokolova

 

Development of Technology for Processing Internal Channels of Small-Sized Parts Based on Computer Modeling

A.E. Zverovshchikov, P. Gurin, A. Steshkin and N. Mironychev

 

Method of Cutting Metal Ingot with Changing Direction of Deformation

V. Voronov, S. Videnin and I. Masich

 

Investigation of the Formation of the Deformed State of the Material in the Operation of Drawing with Wall Thinning during Cold Forming

A.I. Olekhver, K. Ivanov, P. Vinnik, E. Remshev and Z. Rasulov

 

Preventing Contact Corrosion of Carbon Steel Welded Joints

A.S. Tyusenkov, D. Bugay and M.Z. Zaripov

Chapter 4: Materials Science, Surface and Coatings Engineering

Methods for Studying the Optical Properties of Transparent Conducting Oxides Synthesized on the Basis of Tin Dioxide

E.A. Pecherskaya, T.O. Zinchenko, S. Gurin, G. Kozlov, A. Zhurina and A. Shepeleva

 

Investigation of the Possibility of Controlling the Formation of Physical and Mechanical Properties of Aluminum Alloys under Pressure Crystallization

M.S. Denisov

 

Comprehensive Study of Changes in the Phase Composition of Copper-Aluminum Conductors during Heating

A.Y. Pariyskaya, A.V. Mokryak and L.A. Pyankova

 

Synthesis of Thin-Film Layers of Electrochromic Panels Based on SnO2 and WO3 by Aerosol Pyrolysis

T.O. Zinchenko, E.A. Pecherskaya, S. Gurin, G. Kozlov, A. Zhurina and A. Shepeleva

 

Detection of Weathering Effects and Mineral Additive Content of LDPE Composites Using Hyperspectral Imaging

D. Metlenkin, N. Kiselev, Y.T. Platov, P. Tyubaeva, E. Boychenko and I. Burmistrov

 

Modern Methods of Choosing Ways to Restore Parts when Repairing Machines

O. Leonov, G. Temasova, N. Shkaruba and Y. Vergazova

 

Application of Metal Powders to Bronze Bushings

P. Golinitskiy, G. Temasova, U. Antonova, E. Cherkasova and Y. Vergazova

 

Ceramic Materials for Friction Units Operating under Vacuum

V. Alisin

 

Correlation of the Structure of Nickel-Based Electrochemical Systems with Hydrogen Accumulation

A. Zvyagintseva

 

On the Use of the Skin Effect for Eddy-Current Control of Cylindrical Metal Products

I. Vornacheva, F. Ivanov, M. Litvinov, A. Scherbakov, O. Kuzmin, S. Voinash and E. Remshev

 

Influence of the Structure of Iron Coatings on their Physical and Mechanical Properties

Y. Kisel, E. Yudina, M. Kadyrov and N. Rinas

Chapter 5: Hydraulics and Pneumatics

Nonlocal Model of Velocity Vibrations Compressed Fluid under Conditions Hydraulic Impact

E.V. Stefanyuk, T.E. Gavrilova, D.A. Uglanov, V. Panova and A. Shimanov

Chapter 6: Nanotechnology

Modification of a Metal Surface with Detonation Diamond Nanoparticles

V.N. Malikov, N. TIHONSKII, V. Kozlova, L. Shevtsova and A.V. Ishkov

 

Developing Effective Ways Formed of Structure and Properties of Hard Metal Composites Modified by Nanoparticles

Y. Gordeev, V.B. Yasinsky, A.S. Binchurov, N. Usevich, P. Timoshev, Y. Kuzminykh and S. Filippov

 

Study of Osseointegration Properties of Multilayer Coatings with a Biodegradable Film of Flavonoid Nanoaggregates

A. Krasnikov, E. Krasnikova, D. Morozova and N. Spirkina

 

Multilayer Thin-Film Resistive Structures with Temperature Self-Compensation for Super-Precision Resistors and Strain Gauges

S. Gurin, E.A. Pecherskaya, M. Novichkov and O. Safronova

REGISTRATION
Select conference:
Feedback